Rocket Fish RF-WFD301 Manuale utente
Rocketfish Miracast Video Receiver | RF-WFD301
USER GUIDE
Before using your new product, please read these instructions to prevent any damage.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 1 Tuesday, June 4, 2013 10:36 AM
2
Rocketfish RF-WFD301
Miracast Video Receiver
Contents
Introduction .................................................................................................. 2
Features........................................................................................................... 5
Installing the wireless video receiver ................................................... 7
Setting up your receiver connection.................................................... 8
Changing the configuration.................................................................... 9
Disconnecting a Miracast mobile device..........................................11
Updating the firmware ............................................................................11
Troubleshooting ........................................................................................13
Specifications..............................................................................................14
Legal notices ...............................................................................................14
One-Year Limited Warranty....................................................................17
Introduction
Your RF-WFD301 Miracast Video Receiver uses a wireless
communication system to transmit high quality video and audio to
your TV from your mobile device, such as a smartphone or tablet.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 2 Tuesday, June 4, 2013 10:36 AM
3Rocketfish Miracast Video Receiver | RF-WFD301
Safety information
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC
SHOCK, DO NOT REMOVE
COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 3 Tuesday, June 4, 2013 10:36 AM
4
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Unplug this apparatus during lightning storms or when unused
for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 4 Tuesday, June 4, 2013 10:36 AM
5Rocketfish Miracast Video Receiver | RF-WFD301
Features
• High Resolution-Supports up to 1080p resolution to ensure crisp,
detailed visuals
• Wireless Signal-Stream content from your Android phone or tablet
to your TV through walls and doors over 50 feet, without cables or
a network connection
• Many entertainment options-Stream movies, photos, web
content, music, and other content from your compatible Android
device to your TV (requires a USB power source, not included)
• Leading-edge technology-Miracast technology works well across
Android 4.2.1 and newer devices, regardless of brand
Package contents
Examine the contents of the box for your RF-WFD301 Miracast Video
Receiver. The box should contain:
• Rocketfish Miracast Video Receiver
• 6” HDMI adapter
• 30” Micro USB charger cable
•QuickSetupguide
System requirements
• A digital TV with an HDMI jack and a USB port
• A Miracast enabled mobile device with Android™ Jellybean 4.2.1
or newer
12-1245_RF-WFD301_MAN_V1_EN.fm Page 5 Tuesday, June 4, 2013 10:36 AM
6
Rocketfish Miracast video receiver
#Feature
1 HDMI connector
2WPS button
3MicroUSBjack
4Reset button
5 HDMI adapter cable
6Standard USB connector
7MicroUSBconnector
6
7
1
5
4
3
2
12-1245_RF-WFD301_MAN_V1_EN.fm Page 6 Tuesday, June 4, 2013 10:36 AM
7Rocketfish Miracast Video Receiver | RF-WFD301
Installing the wireless video receiver
To install your wireless video receiver:
1Turn off the TV.
2Insert the Rocketfish Miracast Video Receiver into the HDMI port
on your TV. If the video receiver will not fit into the HDMI port on
your TV (too large or too wide), use the 6" HDMI adapter for a
better fit.
3Insert the micro USB connector into the micro USB port on the
receiver. Insert the other end into the USB port on your TV. If the
TV does not have a USB port, use a powered USB charger (not
included).
4Turn on your TV, then press the TV’s Input or Source button to
select the HDMI input that the Rocketfish Miracast Video Receiver
is connected to.
5The LED on the Rocketfish Miracast Video Receiver starts to blink
and the boot up splash screen is displayed within 30 seconds. If
the LED doesn’t blink or the boot up splash screen is not seen,
check to make sure that the TV input you have selected is correct
and the Rocketfish Miracast Video Receiver has power and is
firmly connected to the TV.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 7 Tuesday, June 4, 2013 10:36 AM
8
Setting up your receiver connection
When used for the first time, the Rocketfish Miracast Video Receiver
starts in Auto mode and is ready to accept a Wi-Fi direct connection.
To set up your receiver connection:
1Make sure that the TV or projector screen shows the Rocketfish
Miracast Video Receiver screen.
2On your Miracast mobile device, such as a smartphone or tablet,
turn on the Wi-Fi network.
3On your Miracast mobile device, select the SSID (network name)
that is displayed on your TV. See the documentation that came
with your Miracast mobile device to complete the setup.
4Press the WPS button on the Rocketfish Miracast Video Receiver.
The blue LED will start to blink while the receiver searches for a
connection.
5When the connection is successful, your Miracast mobile device's
screen is displayed on your TV, indicating that video streaming
has started.
Note: To re-connect a device that has been previously connected, repeat steps 1-5.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 8 Tuesday, June 4, 2013 10:36 AM
9Rocketfish Miracast Video Receiver | RF-WFD301
Changing the configuration
If your TV has HDMI CEC support, you can use your TV remote control
to change the default settings on the Rocketfish Miracast Video
Receiver.
Note: The default settings for your Rocketfish Miracast Video Receiver work in most
scenarios. It's recommended that these settings only be changed by advanced users
with an understanding of this technology.
To change the configuration:
1Make sure that CEC is supported on your TV and is enabled.
Note: CEC may be called something different on your TV. See the documentation
that came with your TV for more information.
2Press the TV’s Input or Source button to select the HDMI input
that the Rocketfish Miracast Video Receiver is connected to.
3Point the remote control at the Rocketfish Miracast Video
Receiver, then use the arrow buttons to select the SETTINGS icon
in the Rocketfish Miracast Video Receiver’s menu to enter the
configuration screen.
4On the configuration screen, you can modify the following
options:
•Mode–
Auto mode
• In Auto mode, the Rocketfish Miracast Video Receiver
displays its SSID on screen, waits for, and then accepts a
Wi-Fi direct connection from a Miracast mobile device,
such as a smartphone or tablet. This mode will enable auto
P2P discovery on the Rocketfish Miracast Video Receiver.
• Use Auto mode for a Google Nexus4 cell phone.
Server mode
• In Server mode, the Rocketfish Miracast Video Receiver
displays its SSID on screen, waits for, and then accepts a
Wi-Fi direct connection from a Miracast mobile device such
as a smartphone or tablet.
• Use Server mode for nVidia Tegra 3 tablets.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 9 Tuesday, June 4, 2013 10:36 AM
10
Client mode
• In Client mode, a new menu is displayed on screen to show
available Miracast source devices that the Rocketfish
Miracast Video Receiver has detected. Use the arrow keys
on your TV remote control to move to the Miracast mobile
device you want to connect to, then press ENTER. Make
sure that your Miracast mobile device is in Server mode
and is ready to accept a connection initiated by the
Rocketfish Miracast Video Receiver.
• Use Client mode for Asus Tegra3 – Miracast-enabled
tablets.
•Wi-Fi band–Select to operate on the 2.4GHz band or the 5GHz
band. Your Rocketfish Miracast Video Receiver defaults to
5GHz.
•Persist–Select to retain or discard settings when your
Rocketfish Miracast Video Receiver powers off and on.
•HDCP–Select Unlock, 2.0 or 2.1. HDCP protects the digital
rights of content owners. Your Rocketfish Miracast Video
Receiver defaults to 2.0.
•HDCP Legacy–Select ON or OFF. Your Rocketfish Miracast
Video Receiver defaults to off.
•Sys Info.–View your Rocketfish Miracast Video Receiver's
system information.
12-1245_RF-WFD301_MAN_V1_EN.fm Page 10 Tuesday, June 4, 2013 10:36 AM
Altri manuali per RF-WFD301
4
Indice
Altri manuali Rocket Fish Ricevitore
Rocket Fish
Rocket Fish RF-BTR-319 Manuale utente
Rocket Fish
Rocket Fish RF-RBREC Manuale utente
Rocket Fish
Rocket Fish RF-RBKIT Manuale utente
Rocket Fish
Rocket Fish RF-WHD210 Manuale utente
Rocket Fish
Rocket Fish RF-WHD210 Manuale di installazione e funzionamento
Rocket Fish
Rocket Fish RF-RBUSB Guida rapida
Rocket Fish
Rocket Fish RF-RBREC Manuale utente
Rocket Fish
Rocket Fish RF-RBUSB Manuale utente
Rocket Fish
Rocket Fish RF-RBREC Manuale utente
Rocket Fish
Rocket Fish ROCKETBOOST RF-RBREC Manuale utente
Rocket Fish
Rocket Fish RF-RBKIT Manuale utente
Rocket Fish
Rocket Fish RF-RBAUX Manuale utente
Rocket Fish
Rocket Fish RF-BTR212 Manuale utente
Rocket Fish
Rocket Fish RF-BTR315 Manuale utente
Rocket Fish
Rocket Fish RF-RBAUX Manuale utente
Rocket Fish
Rocket Fish RF-BTR315 Manuale utente
Rocket Fish
Rocket Fish RF-RBAUX Manuale utente
Rocket Fish
Rocket Fish RF-RBAUX Manuale utente
Rocket Fish
Rocket Fish RF-BTR212 Manuale utente
Rocket Fish
Rocket Fish RF-WFD301 Manuale di installazione e funzionamento
