RolloHomeControl 9483 Manuale utente
IP Camera 9483 - Conguration Software
Instruction Manual
VBD 612-4 (10.14)
EN
2
EN
i
Dear Customer,
With your purchase of this IP Camera, you have chosen a
quality product manufactured by RADEMACHER.Thank
you for the trust you have placed in us.
3
EN
i
Contents
1. These instructions.....................................................4
1.1 Application of this manual.........................4
1.2 Symbols used and depictions ................... 4
1.3 Glossary - Denition .....................................5
2. Overview of the IP Camera ....................................6
3. System requirements...............................................7
4. Prerequisites for conguring the
IP Camera settings .................................................... 7
5. Opening the conguration software of
the IP Camera..............................................................8
5.1 The IP Camera's main menu.....................11
5.2 Parameters - OSD.........................................12
5.3 Parameters - Motion Detect.....................13
5.4 Parameters - Cover Area............................14
5.5 Parameters - Basic Settings ......................15
5.6 System - User.................................................16
5.7 System - Time - Settings ............................17
5.8 System - Initialization .................................18
5.9 System - Device Information ...................19
5.10 System - System log....................................20
5.11 Wireless (WLAN)...........................................21
5.11.1 Alternative WLAN
connection with WPS..................22
6. Close settings............................................................23
4
EN
i
1. These instructions...
...describe the conguration of the IP Camera 9483 via the HomePilot® user
interface. You can nd this instruction manual on your HomePilot® under the
following URL:
http://homepilot.local/manual
or in the downloads section of our website:
www.homepilot.de/downloads
The current "Brief instructions for installation and commissioning" (VBD 612-2...)"
can also be downloaded from our website.
Enter the respective URL into the address eld of your browser.
1.1 Application of this manual
◆Please read this manual through completely before operating the IP Camera.
◆Please also read the instruction manuals of the accessories, if available.
◆The manual is a component of the product.
◆When passing the IP Camera on to a third party, this manual must be
passed on as well.
◆If this manual is lost, please request a replacement manual.
1.2 Symbols used and depictions
Depiction Description
1. Steps to be taken
2.
◆Itemisation
Please read the respective
manual
ifurther useful information
5
EN
i
1.3 Glossary - Denition
IP Camera
Network-compatible camera
to transmit image data to the
HomePilot®.
HomePilot®
The HomePilot® is a central
controller unit for RADEMACHER
radio products. Control is carried
out via a tablet PC or Smart-
phone.
User interface
The software for conguration of
the HomePilot®.
LAN (Local Area Network)
Abbreviation for a wired, local
computer network
WLAN (Wireless-LAN)
Abbreviation for a local radio
network
WPS (Wi-Fi Protected Set-up)
Direct and safe connection of two
devices in a radio network with
the help of the WPS function.
6
EN
i
2. Overview of the IP Camera
Front view Reverse side
Microphone *
LAN
connection
Brightness sensor
Infrared (IR) LEDs
Camera lens
Audio
output *
Power supply
Connection of the mains adaptor
Tripod
socket
WPS key
Slot for a micro SD
memory card *
RESET key
Side view
i* The following elements
are not supported by the
HomePilot®.
◆Microphone
◆Audio output
◆Micro SD memory card
7
EN
i
i
4. Prerequisites for conguring the IP Camera settings
Conditions for conguring the IP Camera 9483 settings:
◆The IP Camera must be logged-on to the HomePilot®.
◆The IP Camera and the HomePilot® must be in the same local network
(LAN or WLAN).
iConguration via WR-Connect is not possible.
The conguration software of the IP Camera must be accessed
in the local network.
◆The IP Camera must be connected to a 230 V / 50 Hz mains socket and be
switched on.
Conditions for initial installation of the IP Camera 9483:
◆The camera must be connected to the network router with a LAN cable for
the initial installation and to congure the WLAN settings.
3. System requirements
You require the following to register the IP Camera 9483:
◆Internet access.
◆A router* with DHCP server and a free LAN port.
◆A freely accessible mains socket (230 V / 50 Hz).
◆A commercially available standard computer with current web browser.
◆A HomePilot® with software version 3.2 or higher **
The HomePilot® must be connected to the router and be accessible in the
network via computer.
* or DSL modem with router functionality.
** You can nd the current software version for the HomePilot® under:
Conguration / System / Firmware Update / display right
8
EN
i
5. Opening the conguration software of the IP Camera
The IP Camera and the router are registered in the same local network and the
user interface of the HomePilot® is displayed in your browser.
1. Open the "Conguration" menu.
The connected IP Camera is selected directly and the camera image will ap-
pear in the right column.
You have the following options:
◆Open detailed view
Enables you to congure the camera settings.
◆Edit
Enables you to change the name of a registered camera.
9
EN
i
5. Opening the conguration software of the IP Camera
2. Select "Open detailed view".
Next, the IP Camera's registration menu will appear:
Factory settings:
◆User name: admin *
◆Password: rademacher **
* The user name cannot be changed.
** The password can be changed at any time
via the "System - Edit" menu.
3. Enter the user name (see default factory settings) as well as the password and
select the desired language.
10
EN
i
iIf you already set a password during registration of the IP Camera,
you must enter this password.
Have you forgotten your password?
Reset the IP Camera.
4. Select "Save" to prevent this window from reappearing when next dialling-in.
5. Select "Register" to switch to the main menu.
Resetting the IP Camera
Press the RESET key for approx. 5 seconds
with a thin but not too pointed object. The
camera will then be reset to the default
factory settings.
RESET key
5. Opening the conguration software of the IP Camera
Altri manuali per 9483
1
Indice
Altri manuali RolloHomeControl Telecamera IP
