Ronix 8012 Manuale utente
CORDLESS DRIVER DRILL
8012, 8012C, 8014, 8018
USER MANUAL 3
TECHNICAL SPECIFICATION
GENERAL POWER TOOL SAFETY RULES
WARNING!
-Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, re and/or serious injury. -Save all warnings and
instructions for future reference. -The term «power tool» in
the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
.WORK AREA SAFETY
-Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
-Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
Model 8012 8012C 8014 8018
Battery voltage 12V 12V 14.4V 18V
Max. torque 21Nm 21Nm 26Nm 30Nm
Net weight 1Kg 1Kg 1.2Kg 1.3Kg
Torque setting 21+1 step 21+1step 21+1step 21+1step
Chuck size 10mm
No load speed 0-400/0-1350RPM
Battery capacity 1.5Ah
Charge time 1Hr30
CORDLESS DRIVER DRILL
4
dust. Power tools create sparks which may ignite the dust
or fumes.
-Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
.ECTRICAL SAFETY
-Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
-Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is earthed
or grounded.
-Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
-Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entan-
gled cords increase the risk of electric shock.
-When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
-If operating a power tool in a damp location is unavoid-
able, use a ground fault circuit. Interrupter (GFCI) protect-
ed supply. Use of a GFCI reduces the risk of electric shock.
USER MANUAL 5
.PERSONAL SAFETY
-Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while op-
erating power tools may result in serious personal injury.
-Use personal protective equipment. Always wear eye pro-
tection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for ap-
propriate conditions will reduce personal injuries.
-Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source and/ or bat-
tery pack, picking up or carrying the tool. Carrying power
tools with your nger on the switch or energizing power
tools that have the switch on invites accidents.
-Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
-Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in un-
expected situations.
-Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
-If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-re-
lated hazards.
CORDLESS DRIVER DRILL
6
.POWERTOOL USE AND CARE
-Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
-Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
-Disconnect the plug from the power source and/or the bat-
tery pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preven-
tive safety measures reduce the risk of starting the power tool
accidentally.
-Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instruc-
tions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
-Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
-Keep cutting tools sharp and clean. Properly maintained cut-
ting tools with sharp cutting edges are less likely to bind and
are easier to control.
-Use the power tool, accessories and tool bits etc. in accor-
dance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power
tool for operations different from those intended could result
in a hazardous situation.
USER MANUAL 7
.BATTERY USE AND CARE
-Recharge only with the charger specied by the manufac-
turer. A charger that is suitable for one type of battery pack
may create a risk of re when used with another battery
pack.
-Use power tools only with specically designated battery
packs. Use of any other battery packs may create a risk of
injury and re.
-When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals to-
gether may cause burns or a re.
-Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, ush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
.SERVICE
-Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
-Follow instruction for lubricating and changing accessories.
-Keep handles dry, clean and free from oil and grease.
CORDLESS DRIVER DRILL
8
CORDLESS DRILL/SCREW DRIVER SAFETY
WARNING!
-Hold power tool by insulated gripping surfaces, when per-
forming an operation where the fastener may contact hidden
wiring or its own cord. Fasteners contacting a «live» wire may
make exposed metal parts of the power tool live and could
give the operator an electric shock.
-Always be sure you have a rm footing. Be sure no one
is below when using the tool in high locations.
-Hold the tool rmly.
-Keep hands away from rotating parts.
-Do not leave the tool running. Operate the tool only
when hand-held.
-Do not touch the drill bit or the work piece immediately
after operation; they may be extremely hot and could
burn your skin.
-Some material contains chemicals which may be toxic.
Take caution to prevent dust inhalation and skin contact.
Follow material supplier safety data.
WARNING! WORKING ENVIRONMENT
Do not let comfort or familiarity with product (gained from
repeated use) replace strict adherence to safety rules for
the subject product. Misuse or failure to follow the safety
rules stated in this instruction manual may cause serious
personal injury.
USER MANUAL 9
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY
CARTRIDGE
-Before using battery cartridge, read all instructions and
cautionary markings on (1) battery charger, (2) battery,
and (3) product using battery.
-Do not disassemble battery cartridge.
-If operating time has become excessively shorter, stop op-
erating immediately. It may result in a risk of overheating,
possible burns and even an explosion.
-If electrolyte gets into your eyes, rinse them out with clear
water and seek medical attention right away. It may result
in loss of your eyesight.
.DO NOT SHORT THE BATTERY CARTRIDGE
-Do not touch the terminals with any conductive material.
-Avoid storing battery cartridge in a container with other
metal objects such as nails, coins, etc.
-Do not expose battery cartridge to water or rain. A battery
short can cause a large current ow, overheating, possible
burns and even a breakdown.
-Do not store the tool and battery cartridge in locations
where the temperature may reach or exceed 50° C (122°F).
-Do not incinerate the battery cartridge even if it is severely
damaged or is completely worn out. The battery cartridge
can explode in a re.
-Be careful not to drop or strike battery.
-Do not use a damaged battery.
CORDLESS DRIVER DRILL
10
TIPS FOR MAINTAINING MAXIMUM BATTERY LIFE
-Charge the battery cartridge before completely discharged.
Always stop tool operation and charge the battery cartridge
when you notice less tool power.
-Never recharge a fully charged battery cartridge. Over-
charging shortens the battery service life.
-Charge the battery cartridge with room temperature at
10°C - 40°C (50°F - 104°F). Let a hot battery cartridge
cool down before charging it.
LIGHTING UP THE FRONT LAMP
CAUTION:
Do not look in the light or see the source of light directly.
Pull the switch trigger to light up the lamp. The lamp keeps
on lighting while the switch trigger is being pulled.
NOTE:
Use a dry cloth to wipe the dirt off the lens of lamp. Be
Lamp
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Ronix Trapano
Ronix
Ronix 2513T Manuale utente
Ronix
Ronix 2210C Manuale utente
Ronix
Ronix 2221 Manuale utente
Ronix
Ronix 2214 Manuale utente
Ronix
Ronix 2290 Manuale utente
Ronix
Ronix 2110 Manuale utente
Ronix
Ronix 8905K Manuale utente
Ronix
Ronix 221 Series Manuale utente
Ronix
Ronix 2111 Manuale utente
Ronix
Ronix 8612 Manuale utente
Ronix
Ronix RS-0005 Manuale utente
Ronix
Ronix 8900 Manuale utente
Ronix
Ronix 2112 Manuale utente
Ronix
Ronix 8512 Manuale utente
Ronix
Ronix 2214K Manuale utente
Ronix
Ronix 2106C Manuale utente
Ronix
Ronix RP-8812 Manuale utente
Ronix
Ronix 2213 Manuale utente
Ronix
Ronix 8101K Manuale utente
Ronix
Ronix 8105K Manuale utente
