Ronix 8612 Manuale utente
INSTRUCTION MANUAL
CORDLESS DRIVER DRILL
8612 - 8614 - 8618 - 8614K - 8616K
www.ronixtools.com
USER MANUAL
TECHNICAL SPECIFICATIONS
GENERAL POWER TOOL SAFETY RULES
WARNING!
-Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
-Save all warnings and instructions for future reference.
-The term «power tool» in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
.WORK AREA SAFETY
-Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
-Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
1
KG
Hr
KG KG KG KG
CORDLESS DRIVER DRILL
-Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
.ELECTRICAL SAFETY
-Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
-Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
-Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
-Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
-When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
-If operating a power tool in a damp location is
unavoidable, use a ground fault circuit. Interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
2
USER MANUAL
.PERSONAL SAFETY
-Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
-Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
-Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your nger on the switch or energizing
power tools that have the switch on invites accidents.
-Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
-Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
-Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
-If devices are provided for the connection of dust
3
CORDLESS DRIVER DRILL
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
.POWER TOOL USE AND CARE
-Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
-Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
-Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
-Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
-Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
-Keep cutting tools sharp and clean.Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
-Use the power tool, accessories and tool bits etc. in
4
USER MANUAL
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
.BATTERY TOOL USE AND CARE
-Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
-Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
-When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a re.
-Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
.SERVICE
-Have your power tool serviced by a qualied repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
-Follow instruction for lubricating and changing
5
CORDLESS DRIVER DRILL
accessories.
-Keep handles dry, clean and free from oil and grease.
CORDLESS DRILL/SCREW DRIVER SAFETY
WARNING!
-Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring or its own cord. Fasteners contacting a
«live» wire may make exposed metal parts of the power
tool live and could give the operator an electric shock.
-Always be sure you have a rm footing. Be sure no one
is below when using the tool in high locations.
-Hold the tool rmly.
-Keep hands away from rotating parts.
-Do not leave the tool running. Operate the tool only
when hand-held.
-Do not touch the drill bit or the work piece immediately
after operation; they may be extremely hot and could
burn your skin.
-Some material contains chemicals which may be toxic.
Take caution to prevent dust inhalation and skin contact.
Follow material supplier safety data.
WARNING!
Do not let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. Misuse or failure to follow
the safety rules stated in this instruction manual may
6
USER MANUAL
cause serious personal injury.
IMPORTANT SAFETY INSTRUCTIONS FOR
BATTERY CARTRIDGE
-Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
-Do not disassemble battery cartridge.
-If operating time has become excessively shorter,
stop operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
-If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
.DO NOT SHORT THE BATTERY CARTRIDGE
1.Do not touch the terminals with any conductive
material.
2.Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
3.Do not expose battery cartridge to water or rain. A
battery short can cause a large current ow, overheating,
possible burns and even a breakdown.
-Do not store the tool and battery cartridge in locations
where the temperature may reach or exceed 500 C
(1220 F).
-Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a re.
7
CORDLESS DRIVER DRILL
-Be careful not to drop or strike battery.
-Do not use a damaged battery.
TIPS FOR MAINTAINING MAXIMUM BATTERY
LIFE
-Charge the battery cartridge before completely
discharged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
-Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
-Charge the battery cartridge with room temperature at
100C - 400C (500F - 1040F). Let a hot battery cartridge
cool down before charging it.
LIGHTING UP THE FRONT LAMP
CAUTION:
Do not look in the light or see the source of light directly.
Pull the switch trigger to light up the lamp. The lamp
keeps on lighting while the switch trigger is being pulled.
Lamp
8
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Ronix Trapano
Ronix
Ronix 2214K Manuale utente
Ronix
Ronix 8905K Manuale utente
Ronix
Ronix 8012 Manuale utente
Ronix
Ronix 2513T Manuale utente
Ronix
Ronix 8900 Manuale utente
Ronix
Ronix 8101K Manuale utente
Ronix
Ronix 2112 Manuale utente
Ronix
Ronix 2213 Manuale utente
Ronix
Ronix 2110 Manuale utente
Ronix
Ronix RP-8812 Manuale utente
Ronix
Ronix 2290 Manuale utente
Ronix
Ronix RS-0005 Manuale utente
Ronix
Ronix 221 Series Manuale utente
Ronix
Ronix 8512 Manuale utente
Ronix
Ronix 2210C Manuale utente
Ronix
Ronix 2106C Manuale utente
Ronix
Ronix 8105K Manuale utente
Ronix
Ronix 2221 Manuale utente
Ronix
Ronix 2214 Manuale utente
Ronix
Ronix 2111 Manuale utente
