Ropox FlexiPlus Manuale utente
TF 200.01.0020_ENG
Ropox Flexi+
User manual
This manual should always be in close proximity to the
product
TF 200.01.0020 / Date 04-10-2021
Page | 2
TF 200.01.0020_ENG
Table of Contents
1. Symbols used in this manual............................................................................................................. 3
2. General safety..................................................................................................................................... 3
2.1 Product Unit label.................................................................................................................. 5
3. General requirements......................................................................................................................... 6
3.1 Product information............................................................................................................... 6
3.2 Product description............................................................................................................... 6
3.3 Intended use......................................................................................................................... 6
3.4 Intended population .............................................................................................................. 6
3.5 Intended operator.................................................................................................................. 6
3.6 Basic safety.......................................................................................................................... 6
3.7 Non-clinical functions............................................................................................................ 6
3.8 Product dimensions .............................................................................................................. 7
3.9 Complaints and adverse events ............................................................................................ 7
4. Instructions for use............................................................................................................................. 8
4.1 Installation of product............................................................................................................ 8
4.2 Installation of countertop......................................................................................................12
4.3 Electrical component diagram..............................................................................................13
4.4 Operating the product ..........................................................................................................13
5. Accessories .......................................................................................................................................14
5.1 Installation of accessories....................................................................................................14
6. Troubleshooting.................................................................................................................................20
7. Cleaning .............................................................................................................................................20
8. Maintenance.......................................................................................................................................20
8.1 Periodic maintenance...........................................................................................................20
8.2 Calibration of actuator..........................................................................................................20
9. Component part list...........................................................................................................................21
10. Spare parts list...................................................................................................................................24
11. Environmental protection..................................................................................................................25
12. Electromagnetic compatibility...........................................................................................................25
12.1 Suitable Environments .....................................................................................................25
12.2 Adjacent and stacked use................................................................................................25
12.3 Cables .............................................................................................................................25
12.4 RF portable equipment.....................................................................................................26
12.5 Compliance for emission and immunity standard..............................................................26
Page | 3
TF 200.01.0020_ENG
1. Symbols used in this manual
Warning Symbol
Indication of potentially hazardous situation. If not avoided, it can
result in serious injury or death.
Caution Symbol
Indication of potentially hazardous situation which may result in
minor or moderate injury.
It may also be used to alert against unsafe practices.
Notice Symbol
This symbol is used to notify correct use and handling of the
product.
2. General safety
This manual must be read and understood before use.
Always keep this manual in close proximity of the product.
The use, installation and service of this product must follow
this manual to avoid accidents and serious personal injury.
Never use or handle this product in other ways specified in
this manual as it can result in personal safety hazards and/or
cause damage to the product.
Anyone installing and/or using this product either as operator
or user should have the necessary safety information and
access to this manual.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified
designated person to avoid a hazard.
Page | 4
TF 200.01.0020_ENG
Do not perform repairs, disassembly, or assembly operations,
add-ons, re-adjustments, or modification of the product
beyond what is described in this manual. These must be
carried out by Ropox or Ropox authorized personnel. Do not
perform service while in use.
This appliance can be used by children aged from 8 years
and above and people with reduced physical, sensory, or
mental capabilities, or lack of experience and knowledge if
they have been given supervision, or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Do not use the product if it has defects or has become
damaged before being repaired or replaced.
If the control box makes unusual noise, or smells, switch off
the mains voltage immediately.
Take care that the cables are not damaged.
Unplug the mains cable on mobile equipment before it is
moved.
The products must only be used in an environment that
corresponds to their IP protection.
The information in this manual is based on correct installation
in accordance with installation instructions for this product.
Ropox cannot be held liable if the product is used in any way,
that differs from stated in this manual and/or installation
instruction.
Ropox reserve the right to amend this manual and reference
documents without prior notice.
Page | 5
TF 200.01.0020_ENG
2.1 Product Unit label
This product is CE-marked in accordance with:
Council Directive 2006/42/EC on machinery
Council Directive 2011/65/EU, RoHS
Manufacturer name and address
Date of production
Stock number
Serial number
Consult manual before use
Operating interval of electrically operated equipment. The use of electrical
height adjustable equipment can run at maximum 1 minute, followed by a 9
minute break.
Consult manual for important safety related information, warnings, and
safety precautions.
Do not dispose as unsorted municipal waste. Product must be returned to a
designated recycling station.
Operating temperatures may not exceed +10°C - +40°C
Transport and storage temperatures may not exceed -10°C - +50°C
Page | 6
TF 200.01.0020_ENG
3. General requirements
3.1 Product information
Manufacturer
Ropox A/S
Ringstedgade 221, DK-4700 Naestved
+45 55 75 05 00
Email: Info@ropox.com
Product models
Part number
Model
Configuration
30-90xxx-x
60 –300 cm
Electrical
Maximum user weight
according to DS/EN 12182:2012
150kg evenly distributed
max load includes weight of tabletop and other installations
Power supply
100-240V ~50/60Hz
I in
3A
Standby power
0,1 W
Intermittence
1min use / 9min break
Height adjustment
300mm
Speed of actuation
≈36mm/s
IP rating
IPX20
Ambient temperature range
-10 °C to +50 °C Transport and storage
+10 °C to +40 °C Operation
3.2 Product description
Ropox Flexi+ is a height-adjustable system for tabletops or workstations. The product can be
adjusted in height electrically.
3.3 Intended use
The product is intended for height adjustment of a tabletop or workstation for easier and more
comfortable use by people with differing heights and statures. Standard stroke length –300mm,
but with an option to customize stroke length between 0mm - 660mm.
3.4 Intended population
Anyone who can find use in having a tabletop or workstation with an adjustable height.
3.5 Intended operator
Anyone who has read and understood this manual can use the product. Only children over the age
of 8 may use the product, however, only under the supervision of an adult.
3.6 Basic safety
Ropox Flexi+ has a built-in anti-collision system called Ropox Sicuro, where, if the product
registers an increase in resistance during operation, either up or down, the legs will retract (approx.
50mm).
Additionally, it’s possible to buy what’s called a safety-stop. This is a safety system that works in
tandem with Ropox Sicuro, that is especially sensitive and is better at registering soft material. The
safety-stop is placed underneath the table, at the edge, which makes it optimal for seated users.
3.7 Non-clinical functions
Ropox Flexi+ is designed to make use of tabletops and worktops comfortable and easier to access
for the intended population.
Page | 7
TF 200.01.0020_ENG
3.8 Product dimensions
Aluminum profile is always 50mm shorter than tabletop.
60 –244cm
245 –300cm
3.9 Complaints and adverse events
Any serious incident that has occurred in relation to the use of the product, should be reported to
the manufacturer and the competent authority of the Member State in which the user is located.
Page | 8
TF 200.01.0020_ENG
4. Instructions for use
4.1 Installation of product
Check that there is 50mm free space above the floor, so the legs can be attached directly to the wall.
2-3
Page | 9
TF 200.01.0020_ENG
4.1.1A
Mark these two points for leg installation
Keep a minimum distance of 8cm to fixed
objects next to tabletop.
Be aware of countertop overhang.
4.1.1B
Attach wall brackets the points marked
out
If needed use rawlplugs. Max pull-out force in
top screw is 30kg.
4.1.1C
Plumb the wall brackets and attach top
screws
4.1.1D
Slide motor columns in wall brackets
Page | 10
TF 200.01.0020_ENG
4.1.2A
Mount support arms on profile
Do note, that the support arms must not be
more than 60cm apart. Also note that the
outermost support arms must face inwards
with their outer bracket. This is done by
unscrewing the bracket.
4.1.2B
Mount the spacer on the profile in each
end
Tighten the bottom screws to fasten the
spacer.
4.1.2C
Mount the adjustment screws on the leg,
in line with where the support arm will be
placed
4.1.2D
Mount the profile on the motor columns
Altri manuali per FlexiPlus
1
Indice
