ROSE DISPLAYS ANOFRAME VERSAMOUNT WEIGHTED BASE Manuale utente

Parts

35 Congress Street, Salem MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

AnoFrame VersaMount

Weighted Base

Step 1

Locate the two split rails and the solid

rail that is the same length as the split

rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid side

Ano rail. Insert one corner bracket

into each end of each split side Ano

rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Slide screw tab into channel of bottom

Ano rail. Fig. 3.

Step 3

Place transitional collar over screw tab

and push onto frame. Fig. 4.

Step 4

Finish assembling frame following the

sequence in Fig. 5.

Note: Placement of split rails will

depend on type of frame. Split rails

will be on the top for top-loading

frames and on the side for side-

loading frames.

split rails

solid rail

Instructions For Assembly

Incept-9.6.02

Figure 1

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountRoundBase

Figure 3

Corner

Brackets

AnoFrame

Rails

AnoFrame

Split Rails

Figure 2

Figure 4

Screw Tab Transitional

Collar

Vertical

Post

Weighted

Base

Instruction Sheet (page 1 of 2)

#97-0431

solid rail

split rails

Figure 5

Parts

Step 5

Screw vertical post onto screw tab and

tighten. Fig. 6

Note: Use the end of the post with

the smaller opening.

Step 6

Screw the vertical post onto the

weighted base and tighten. Fig 7

Step 7

Slide your graphic into the AnoFrame.

Fig. 8

Instructions For assembly

Incept-9.6.02

Figure 6

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountRoundBase

Figure 8

Figure 7

Finished Look

35 Congress Street, Salem, MA 01970

Tel# 1- 800 631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

#97-0431

Instruction Sheet (page 2 of 2)

AnoFrame VersaMount

Weighted Base

Parts

AnoFrame VersaMount

Weighted Base

split rails

solid rail

Incept-9.6.02

Figure 1

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountRoundBase

Figure 3

Corner

Brackets

AnoFrame

Rails

AnoFrame

Split Rails

Figure 2

Figure 4

Screw Tab Transitional

Collar

Vertical

Post

Weighted

Base

Instruction Sheet (page 1 of 2)

#97-0431

solid rail

split rails

Figure 5

Step 1

Locate the two split rails and the solid

rail that is the same length as the split

rails.

Insert corner brackets into side

AnoFrame rails. Insert two corner

brackets into each end of the solid side

Ano rail. Insert one corner bracket

into each end of each split side Ano

rail. Fig. 1 & Fig. 2

Note: Tension tabs on corner

brackets face towards outside of

frame.

Step 2

Slide screw tab into channel of bottom

Ano rail. Fig. 3.

Step 3

Place transitional collar over screw tab

and push onto frame. Fig. 4.

Step 4

Finish assembling frame following the

sequence in Fig. 5.

Note: Placement of split rails will

depend on type of frame. Split rails

will be on the top for top-loading

frames and on the side for side-

loading frames.

Instructions For Assembly

Parts

Step 5

Screw vertical post onto screw tab and

tighten. Fig. 6

Note: Use the end of the post with

the smaller opening.

Step 6

Screw the vertical post onto the

weighted base and tighten. Fig 7

Step 7

Slide your graphic into the AnoFrame.

Fig. 8

Instructions For assembly

Incept-9.6.02

Figure 6

The AnoFrame VersaMount is a trademark of Rose Displays, Ltd. Neither

the manufacturer nor any sales agent may be held liable for injury, loss

or damage resulting from the use of these products.

Part #02INSVersaMountRoundBase

Figure 8

Figure 7

Finished Look

#97-0431

Instruction Sheet (page 2 of 2)

AnoFrame VersaMount

Weighted Base

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ROSE DISPLAYS Accessori

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH WINDOW MOUNTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH 2 WALL MOUNTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS BUTTERFLY CLIPS WITH RING AND HOOK Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH WINDOW MOUNTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT MAGNET BASE SQ Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK WITH PEG Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH FISH CLIP Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-TOGGLEBOLTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH MULTICLIPS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOSKYBOX-TOP LOADING 3 WAY Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH MULTICLIPS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME VERSAMOUNT CLAMP BASE SQ Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE CLIP AND CABLE AND... Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH METAL CLIP AND SCREWS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS CLEVER WHATEVER Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI ROUND WITH CABLE CLIP AND CABLE AND... Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME SQUARE WITH 4 WALL MOUNTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ROPOLE-OMNI HEAD WITH MAGNETS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA FRAME ROUND WITH CABLE AND BALL Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND BALL CHAIN Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS QUICKGRIP WITH WINDOW MOUNTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE WITH CEILING SLUG Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH CABLE CLIP AND LOOP AND... Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH MULTICLIPS Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente