ROSE DISPLAYS ANOQUICK SQUARE WITH MULTICLIPS Manuale utente

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Square Profile Instruction Sheet

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

MultiClips

1UP-0101

End Caps

06-5545

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

AnoQuick™

Instructions For Hanging

Incept-7.31.02

Figure 2

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

35 Congress Street, Salem, MA 01970

Tel# 1-800-631-9707 Fax# 1-800-560-2890

e-mail:signware@rosedisplays.com

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClip

1UP-0101

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClips

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4 Repeat steps 3 & 4

for second MultiClip.

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClips for future projects.

Square Profile Instruction Sheet

AnoQuick™

Figure 2

Figure 6

Figure 5

Figure 1

Figure 3 Figure 4

Parts

Note: Use only

with graphics

mounted on 3/16”

foamboard or other

similar thickness.

Can also use a

folded edge thinner

substrate.

Instructions For Hanging

Incept-7.31.02

End Caps

06-5545

AnoQuick

12A300SQ

AnoQuick is a trademark. Neither the manufacturer nor any sales agent

may be held liable for injury, loss or damage resulting from the use of

these products. Part #02INSAnoQuickSQMC

MultiClip

1UP-0101

Step 1

Prepare edges of graphic. Place the graphic on

tabletop with one edge at the table edge. Using

the AnoQuick holder, run it across the graphic

edge, crushing it slightly. Fig. 1

Step 2

Starting at one corner, push the holder onto the

graphic. Work your way down the holder tapping

it down firmly to seat the graphic fully. Fig. 2

Step 3

Squeeze sides of MultiClip together. Fig.3

Step 4

Align the bottom rail of the MultiClip with

the top channel of the aluminum holder. Slide

MultiClip into rail. Fig. 4

Step 5

Push end caps into place. Fig. 5

Step 6

Suspend poster. Fig. 6

Important note:

Please save and reuse the AnoQuick holder,

End Caps and MultiClip for future projects.

Square Profile OneUp

Instruction Sheet

AnoQuick™

Figure 2

Figure 6Figure 5

Figure 1

Figure 3 Figure 4

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ROSE DISPLAYS Accessori

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH WALL HANGERS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI SQUARE WITH CABLE CLIP AND BALL... Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOCONNECTOR WITH ANOGOTCHA Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND ASSEMBLED-TOGGLEBOLTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK ROUND WITH CABLE AND BALL Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ADVANCETRAK WITH CABLE CLIP AND CABLE Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOKIOSK WITH BASE RAIL Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ROPOLE-OMNI HEAD WITH MAGNETS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA WITH WINDOW MOUNTS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE WITH CABLE CLIP AND BALL... Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS GOTCHA FOR PEGBOARD Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOFRAME ROUND WITH MULTICLIPS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI ROUND WITH CABLE AND SAUCER Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND LOOP AND... Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOGOTCHA ROUND WITH MULTICLIPS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS SUPERSNAP WITH BALL CHAIN Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOMULTI SQUARE WITH CABLE CLIP AND CABLE AND... Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK SQUARE WITH GOTCHA AND MULTICLIPS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS CLEAR LOCKING HOOKS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS COVER Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS SNAIL ADHESIVE DISK Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS TOPPER CLIPS Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ANOQUICK WITH PEG Manuale utente

ROSE DISPLAYS

ROSE DISPLAYS ULTRAFRAME Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente