Rose electronics CrystalLink USB-3-2-1 Fiber Manuale utente

CrystalLink USB

-3-2-1 CATx

USB

3.1/2.0/1.1 CAT6a/7 Extender

Installation

and

Operation Manual

10707 Stancliff Road

Houston, Texas 77099

Phone: (281) 933-7673

[email protected]

LIMITED WARRANTY

No part of this manual may be reproduced, stored in a retrieval system, or transcribed in any form or any means, electronic or mechanical, including photocopying and

recording, without the prior written permission of Rose Electronics.

manual-crystallink-usb-3-2-1-catx-2018-03-06

Rose Electronics®warrants the CrystalLink USB-3-2-1 CATx Extender to be in good working order for one year

from the date of purchase from Rose Electronics or an authorized dealer. Should this product fail to be in good

working order at any time during this one-year warranty period, Rose Electronics will, at its option, repair or

replace the Unit as set forth below. Repair parts and replacement units will be either reconditioned or new. All

replaced parts become the property of Rose Electronics. This limited warranty does not include service to

repair damage to the Unit resulting from accident, disaster, abuse, or unauthorized modification of the Unit,

including static discharge and power surges.

Limited Warranty service may be obtained by delivering this unit during the one-year warranty period to Rose

Electronics or an authorized repair center providing a proof of purchase date. If this Unit is delivered by mail,

you agree to insure the Unit or assume the risk of loss or damage in transit, to prepay shipping charges to the

warranty service location, and to use the original shipping container or its equivalent. You must call for a return

authorization number first. Under no circumstances will a unit be accepted without a return authorization

number. Contact an authorized repair center or Rose Electronics for further information.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO A

PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE, AND NO WARRANTIES, WHETHER EXPRESS

OR IMPLIED, WILL APPLY AFTER THIS PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTIED ABOVE, YOUR SOLE

REMEDY SHALL BE REPLACEMENT OR REPAIR AS PROVIDED ABOVE. IN NO EVENT WILL ROSE

ELECTRONICS BE LIABLE TO YOU FOR ANY DAMAGES INCLUDING ANY LOST PROFITS, LOST

SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR

THE INABILITY TO USE SUCH PRODUCT, EVEN IF ROSE ELECTRONICS OR AN AUTHORIZED DEALER

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER

PARTY.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

WHICH MAY VARY FROM STATE TO STATE.

DECLARATIONS OF CONFORMITY

This is to certify that, when installed and used according to the instructions in this manual, the units listed and

described here are shielded against the generation of radio interferences in accordance with the application of

Council Directives 2014/30/EU and 2014/30/EU, as well as these standards:

■EN 55022: 2010/AC:2011 (Class B)

■EN 55024:2010 + A1:2015

■EN 55032

■EN 61000

This equipment has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at their own expense.

The product safety of the devices is proven by their compliance with the following standards:

■CAN/CSA-ICES-003 Issue 6

The manufacturer complies with the EU Directive 2012/19/EU on the prevention of waste electrical and

electronic equipment (WEEE). The device labels carry a respective marking.

These devices comply with Directive 2011/65/EU of the European Parliament and of the council of 8 June

2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(RoHS 2, RoHS II). The device labels carry a respective marking.

TABLE OF CONTENTS

Contents

Disclaimer 1

System Introduction 1

Features 1

Package Contents 2

Additional Items Required 2

Application Examples 2

CrystalLink USB-3-2-1 CATx Models 3

Transmitter Unit 3

Receiver Unit 4

Installation Procedure 6

Cabling Requirements 6

Equipment Location 7

Installing the Transmitter 7

Installing the Receiver 8

Connecting the Transmitter to the Receiver 8

Checking the Installation 8

Connecting a USB Device 9

Compatibility 9

Ethernet Pass-Through Connection 9

Transmitter and Receiver Mounting Options 10

Option 1: CrystalLink USB-3-2-1 CATx Extender Mounting Bracket Kit 10

Option 2: CrystalLink USB-3-2-1 CATx Extender Mounting Plate 10

Troubleshooting 11

Safety 14

Maintenance and Repair 15

Technical Support 15

Figures

Figure 1. transmitter unit – LED’s and connectors 4

Figure 2. Receiver unit – LED’s and connectors 5

Figure 3. CrystalLink USB-3-2-1 CATx extender – standard installation 6

Figure 4. Installing transmitter unit cables 7

Figure 5. Installing receiver unit cables 8

Figure 6. Chassis mounting options 10

Tables

Table 1. Troubleshooting procedures ............................................................................................. 13

Appendices

Appendix A —Specifications 16

INTRODUCTION

CrystalLink USB-3-2-1 CATx Extender Manual 1

Disclaimer

While every precaution has been taken in the preparation of this manual, the manufacturer assumes no

responsibility for errors or omissions. Neither does the manufacturer assume any liability for damages resulting

from the use of the information contained herein. The manufacturer reserves the right to change the

specifications, functions, circuitry of the product, and manual content at any time without notice.

The manufacturer cannot accept liability for damages due to misuse of the product or other circumstances

outside the manufacturer’s control. The manufacturer will not be responsible for any loss, damage, or injury

arising directly or indirectly from the use of this product (See limited warranty).

System Introduction

Thank you for choosing the Rose Electronics CrystalLink USB-3-2-1 CATx extender.

The CrystalLink USB-3-2-1 CATx extender provides simultaneous transparent USB extension for all USB3.1,

2.0 and 1.1 devices up to 330 feet (100 meters) over a single CAT6a/7 UTP cable.

Up to four USB devices such as a USB3.1 conferencing camera, flash drives, hard drives, keyboards, mice,

interactive white boards, touchscreens, docking stations, USB to video converters, audio devices, and/or any

other USB3.1, 2.0 and 1.0 device can be extended away from the host PC using the CrystalLink USB-3-2-1

CATx extender. Additional USB devices can be connected using a powered USB hub.

The CrystalLink USB-3-2-1 CATx extension system consists of two units, a transmitter and a receiver. The

transmitter connects to your computers’ USB port. The transmitter is linked directly to the receiver using

industry standard CAT6a/7 cable and the USB devices connect to the receiver.

To support the USB3.1 SuperSpeed of up to 5Gbps, the CrystalLink USB-3-2-1 CATx extender must be

connected directly to the USB3.1 port of a host device.

The instructions in this manual assume a general knowledge of computer installation procedures, familiarity

with cabling requirements, and some understanding of USB device operation.

Features

■Supports a single CAT6a/7 cable up to 330 feet (100 meters)

■Supports transparent USB3.1 Gen 1 SuperSpeed data rates up to 5Gbps

■Supports all USB3.1, 2.0, 1.1 devices simultaneously at full bandwidth

■Backwards compatible with USB2.0 and USB1.1 devices

■Four USB3.1 Gen 1 receiver ports, each with up to 1.2 Amp (6W) power

■Attach up to 3 powered USB hubs for additional remote USB device support

■Ethernet 100/1000 pass-through for connecting to network enabled devices

■Plug and Play. No software drivers required

■Supports all major operating systems: Windows®, MAC OS™, Linux® and Chrome OS™

■Made in North America

CrystalLink USB-3-2-1 CATx Extender Manual 2

Package Contents

The package contents consist of the following:

■Transmitter unit

■Receiver unit

■USB3.1 Gen 1 cable

■24V DC Power Adapter (2) and AC power cable (2). (Transmitter is 1A, Receiver is 2.71A)

■Installation & Operation Manual

Additional Items Required

■USB compatible computer (host computer) with a USB compliant operating system

■USB compatible device(s) for remote-end connection

■Solid core CAT6a/7 Unshielded Twisted Pair (UTP) cable, shielded (STP) cable or foiled (FTP) cable up to

a maximum of 330ft (100m).

■For optimum performance, the CAT6a/7 cable should be run straight and not coiled, and not routed close

to electrical cables or radio interference. Terminate the cables according to T568A/T568B.

All references to CAT6a/7 cable in this document refer to solid-core cable and represent the minimum CAT6a/7

specification requirements. Use of UTP/STP/FTP patch-cables may reduce the recommended cable extension

distances.

Application Examples

The CrystalLink USB-3-2-1 CATx is ideal for use with USB3.1 conferencing cameras or in computer room or

industrial environments where USB devices need to be connected remotely from a host PC.

■Industrial control

■Interactive whiteboard

■Connection to network attached devices

■Boardroom and conferencing presentations. Connect to a USB3.1 videoconferencing camera to provide

video, control and power over a single CAT6a/7 cable

■Extension of multiple USB devices including hard drivers, printer, scanner, camera control, touchscreens

MODELS

CrystalLink USB-3-2-1 CATx Extender Manual 3

CrystalLink USB-3-2-1 CATx Models

The CrystalLink USB-3-2-1 CATx enables users to extend beyond the standard 5m cable limit for USB

peripherals by locating high-speed USB device(s) up to 330 feet (100 meters) from the computer.

Transmitter Unit

The transmitter connects to the host device using the supplied USB3.1 Gen 1 cable. Power for the transmitter

is provided by included 24V 1A power adapter. Power and status LED’s are conveniently located on the front

panel for user reference.

Transmitter unit – front panel view

Transmitter unit – rear panel view

Item Type Description

1 Power LED LED is SOLID ON when DC power is supplied to the extender unit. LED is

OFF when no power is supplied by the AC adapter.

2 Mode/Config Reserved for engineering use

Status LED

LED is SOLID ON when the system is functioning normally. LED BLINKS

when the system is booting or to indicate a temperature warning together

with the LINK, USB2, and USB3 LEDs.

Link LED

LED is SOLID ON when the transmitter is linked to an opposite receiver

unit. LED is OFF when there is no connection between the transmitter and

receiver.

USB2.0 LED

LED is SOLID ON when an active USB2.0 connection is established through

the extender system. LED BLINKS when the USB2.0 connection is

suspended/asleep. LED is OFF when no USB2.0 connection is detected.

USB3.1 LED

LED is SOLID ON when an active USB3.1

connection is established through

the extender system. LED BLINKS when the USB3.1 connection is

suspended/asleep. LED is OFF when no USB3.1 connection is detected.

4 LAN port

(100/1000 Mbps) Ethernet pass through channel connects to a network or Ethernet device.

CrystalLink USB-3-2-1 CATx Extender Manual 4

5 Link port (RJ45) Accepts the RJ45 connector for CAT6a/7 cabling to connect the transmitter

to the receiver.

6 USB host port USB3.1 Type B connector used to connect the transmitter to the USB3.1

host computer.

7 DC power port Locking connector for the included 24VDC 1A power adapter

Figure 1. transmitter unit – LED’s and connectors

Receiver Unit

The receiver has four USB3.1 Type-A ports for connecting up to four USB devices. Additional devices may be

connected by attaching a USB hub to the receiver unit. The receiver is powered directly by the included 24V

2.71A power supply, delivering 1.2 Amp of current per USB port.

Receiver unit – front panel view

Receiver unit – rear panel view

Item Type Description

1 Power LED LED is SOLID ON when DC power is supplied to the extender unit. LED is OFF

when no power is supplied by the AC adapter.

2 Mode/Config Reserved for engineering use

Status LED

LED is SOLID ON when system is functioning normally. LED BLINKS when system

is booting OR to indicate a temperature warning in unison with the LINK, USB2,

and USB3 LEDs.

Link LED LED is SOLID ON when transmitter is linked to an opposite receiver. LED is OFF

when there is no connection between the transmitter and receiver.

USB 2 LED

LED is SOLID ON when an active USB 2 connection is established through the

extender system. LED BLINKS when the USB 2 connection is suspended/asleep.

LED is OFF when no USB 2 connection is detected.

USB3 LED

LED is SOLID ON when an active USB3.1 connection is established through the

extender system. LED BLINKS when the USB3.1 connection is suspended/asleep.

LED is OFF when no USB3.1 connection is detected.

CrystalLink USB-3-2-1 CATx Extender Manual 5

4 LAN Port

(100/1000 Mbps) Ethernet pass through channel connects to a network or Ethernet device.

5 Link Port (RJ45) Accepts RJ45 connector for CAT6a/7 cabling to connect the transmitter to the

receiver

6 Device Ports

(USB3.1 Type A) Accepts all USB devices.

7 DC Power Port Locking connector for the included 24VDC 2.71A power adapter

Figure 2. Receiver unit – LED’s and connectors

INSTALLATION

CrystalLink USB-3-2-1 CATx Extender Manual 6

Installation Procedure

Before beginning an installation, ensure you have all products and components ready for the installation

Cabling Requirements

The CrystalLink USB-3-2-1 CATx extender requires a minimum grade of Category 6a cabling to be used in

order to reach 330ft (100m) of extension distance. For full distance extension, patch cable can be used up to

35ft (10m) only. The remaining 295ft (90m) must be solid core premise cabling.

When planning your installation, first determine the path of the link cable and whether to use Unshielded,

Shielded or Foiled cable where appropriate.

When installing this product, it is appropriate to use Unshielded (UTP) cabling if the cable installation meets the

following requirements:



The cable is not bundled with other cables



The cable is run loosely with other Category cables



The cable is not placed close to sources of interference such as power lines and radios



The cable is not looped or coiled

For optimum performance, Shielded (STP) or Foiled (FTP) cabling should be used if the cable installation

encounters any of the following conditions:



The cable is bundled with other cables



The cable is run tight against other Category cables



The cable is placed near sources of interference like power lines and radios



The cable is looped or coiled

Figure 3. CrystalLink USB-3-2-1 CATx extender – standard installation

USB3.1 Host

TX Unit

RX Unit

CAT6a/7

Cable

USB

Devices

Network Camera

Local LAN

Altri manuali per CrystalLink USB-3-2-1 Fiber

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rose electronics Estensione

Rose electronics

Rose electronics CrystalView DVI Mini Manuale utente

Rose electronics

Rose electronics Crystal View Manuale utente

Rose electronics

Rose electronics CrystalLink CLK-1U4TP-100M/PE Manuale utente

Rose electronics

Rose electronics Xcion DVI/VGA over CATx Manuale utente

Rose electronics

Rose electronics CrystalLink CLK-4U2FMB-500M Manuale utente

Rose electronics

Rose electronics CrystalView DVI EX Manuale utente

Rose electronics

Rose electronics CrystalView DVI EX Manuale utente

Rose electronics

Rose electronics CRK-1P1V Manuale utente

Rose electronics

Rose electronics CRYSTALVIEW USB 1.1 Manuale utente

Rose electronics

Rose electronics CrystalView DVI Multi Manuale utente

Rose electronics

Rose electronics CrystalView fiber CRK-1DFM/SUN Manuale utente

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manuale utente

Rose electronics

Rose electronics CrystalView DVI Fiber CRK-2DFMPD1D Manuale utente

Rose electronics

Rose electronics CrystalLink USB2.0 CATx Manuale utente

Rose electronics

Rose electronics CrystalView HDT Manuale utente

Rose electronics

Rose electronics CRK-1P1V Manuale utente

Rose electronics

Rose electronics CrystalView EX5 Manuale utente

Rose electronics

Rose electronics CrystalView DVI Plus Manuale utente

Rose electronics

Rose electronics Cybernetech CLK-2U2TP-100M Manuale utente

Rose electronics

Rose electronics CrystalView DVI Quad Guida all'installazione

Rose electronics

Rose electronics CLK-4U2FM-500M Manuale utente

Rose electronics

Rose electronics CrystalLink CLK-1U1TP-40M Manuale utente

Rose electronics

Rose electronics CrystalView CRK-1DTXT-HD5 Manuale utente

Rose electronics

Rose electronics CRK-2DTPPDVI Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente