Rose electronics X series Manuale utente

UltraMatrix Single unit Installation

The following installation procedure features the 4XE model. Installation for

other models (2, 4, or 8 computers) follow the same basic procedure.

It is recommended that power to all monitors, computers, and UltraMatrix be off

until all connections have been made.

The below illustration shows the basic cable connections for UltraMatrix and the

installation steps to properly connect the cables, computers, and KVM stations

to UltraMatrix.

1. Connect a KVM station to the KVM 1 DB25F connector using the

appropriate KVM adapter cable. Depending on the model, connect other

KVM stations to the KVM x DB25F connector.

2. Connect the computers to UltraMatrix using the appropriate CPU adapter

cable. Connect the keyboard, monitor, and mouse computer ports to the

corresponding connectors on the CPU adapter cable. Connect the DB25M

connector to the CPU DB25F connector on UltraMatrix.

3. Connect other computers (4, 8, 12, or 16 depending on model)

4. With all cabling in place, power on all monitors, the UltraMatrix switch, and

boot the computers last.

Please refer to the Installation and Operations manual for the installation

procedure for an expanded system.

KVM Station

KVM adapter

cable

CPU adapter

cable

Operating Instructions

With all cabling in place and power applied to all equipment, the video monitor

connected to KVM port #1 should display the video from computer #1 (default).

Switching to other computers is accomplished by:

1. Keyboard commands (press and release left Ctrl key + CPU #)

(LCtrl + 3 switches to port #3)

2. On-Screen-Display list of computers (Left Ctrl + Esc key)

3. Remotely using the RS232 port and sending switching commands from a

remotely connected computer using a communication program like

HyperTerminal. (Sending K2C8S, enter, switches KVM #2 to CPU port #8)

Additional keyboard commands are available for other switching methods,

invoking the scan mode, and others. See Table 1 for a list of keyboard

commands and their functions.

The OSD provides a visual interface to the features, set-up and additional

functions. The OSD is invoked by pressing and releasing the left Ctrl key, then

the F12 key. The below menu will display for configuring the System,

Computers, KVM. User, Profile, Group, and Language. Refer to the Installation

and Operations manual for a detailed description of each menus features and

options.

To navigate through the menu system, use the arrow keys to select the

configuration menu needed and press [Enter]. When you press [Enter] that

menu will display, an input box will display for a new value, or a list of

supported choices will display. Enter or select the information needed and

press [Enter]. To return to the previous page or abort an input, press the [Esc]

key.

No part of this publication may be reproduced, stored in a retrieval system, or transcribed in any form or any

means, electronic or mechanical, including photocopying and recording, without the prior written permission of

Rose Electronics.

Rose Electronics Part # QS-UME

Printed In the United States of America

Keyboard commands

The following table describes the available keyboard commands. The [Ctrl] key

sequence is a press and release of the left control key. Commands following

[Ctrl] must be entered within 2 seconds.

Command

Key sequence

Description

Main Menu

[Ctrl] [F12]

Displays main menu

CPU List

[Ctrl] [Esc]

Displays CPU selection list

Direct CPU

connect

[Ctrl] n [Enter]

Connects directly to the specific

CPU number “n”.

Connect

Back

[Ctrl] [Backspace]

Connects to the previous CPU

Connect

Down

[Ctrl] [Minus sign]

Connects to the previous CPU

in a Group.

Connect Up

[Ctrl] [Plus sign]

Connects to the next sequential

CPU in a group

KVM Status

[Ctrl] D

Displays / Removes status box.

Logout

[Ctrl] L

Logs user out if the KVM station

is configured for user logins.

Disconnect

[Ctrl] Q

Disconnects the current CPU

Reset

Keyboard/

mouse

[Ctrl] R

Resets / enables keyboard and

mouse; enables PS/2 mouse on

connected CPU

Send Null

Byte

[Ctrl] N

Sends a null byte to the CPU’s

PS/2 mouse port. Use this

command if the PS/2 mouse

gets “out of sync”.

Reset Mouse

(NT or Unix

systems only)

[Ctrl] O (not zero)

Resets the currently selected

NT or Unix computers PS/2

mouse. Also switches the NT

mouse driver to “wheel” mode.

Start Scan

[Ctrl] S

Sequentially steps through all

connected CPUs in a group.

Stop Scan

[Ctrl] X

Turns scan “Off”

Table 1 - Keyboard Commands

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rose electronics Interruttore

Rose electronics

Rose electronics CTP-4P Manuale utente

Rose electronics

Rose electronics UltraMatrix EE4-4X16U Guida all'installazione

Rose electronics

Rose electronics Orion XC OXS-XC080-TP Manuale utente

Rose electronics

Rose electronics ULTRAMATRIX 4xE Manuale utente

Rose electronics

Rose electronics MultiStation ML-2U Manuale utente

Rose electronics

Rose electronics UltraMatrix AV DVI Manuale utente

Rose electronics

Rose electronics QuadraVista Manuale utente

Rose electronics

Rose electronics Vista LC DVI Manuale utente

Rose electronics

Rose electronics MultiVideo DP MDM-4T2DP-A1 Manuale utente

Rose electronics

Rose electronics RE2-1R2X16U Manuale utente

Rose electronics

Rose electronics MasterSwitch MS-5P Manuale utente

Rose electronics

Rose electronics Porter PO-4P Manuale utente

Rose electronics

Rose electronics Ultraview Remote 2 Manuale utente

Rose electronics

Rose electronics KVM-4THD/4K Manuale utente

Rose electronics

Rose electronics Vista Mini Manuale utente

Rose electronics

Rose electronics SuperSwitch SS-9 Manuale utente

Rose electronics

Rose electronics UltraLink Lite UL-LV3 Manuale utente

Rose electronics

Rose electronics UltraVista Manuale utente

Rose electronics

Rose electronics MultiStation ML-2U Manuale utente

Rose electronics

Rose electronics UltraConsole UC1-1X4U Manuale utente

Rose electronics

Rose electronics Vista KVL-4PCA Manuale utente

Rose electronics

Rose electronics SuperSwitch SS-9 Manuale utente

Rose electronics

Rose electronics Ultraview Pro KVM SWITCH WITH ON-SCREEN... Manuale utente

Rose electronics

Rose electronics Caretaker Plus Automatic Switch Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Rose electronics x series Manuale utente

Manuali Interruttore popolari di altre marche