Rosewill RNX-N250PCe Manuale utente

Wireless N Adapter RNX-N250PCe

Quick Installation Guide

Wireless N Adapter RNX-N250PCe Quick Installation Guide

1 Package Contents

Before getting started, please verify that your package includes the

following items :

1. Rosewill RNX-N250PCE Wireless N Adapter x 1

2. 5 dBi Antenna x2

3. Low Profile Bracket x1

4. Quick Installation Guide x1

5. Resource CD x1, including :

> Rosewill Wireless N Utility and Driver

>User Manual

Make sure that the package contains above items. If any of the

listed items is damaged or missing, please contact with your distributor.

2 Product Overview

The adapter is an 802.11n client device; it is designed to provide a

high-speed and unrivaled wireless performance for your computer or

notebook. With a faster wireless connection, you can get a better Internet

experience, such as downloading, gaming, video streaming and so on.

With the 802.11n technology, higher throughput improvements using

MIMO (multiple input, multiple output antennas), the RNX-N250PCE’s

transfer rate up to 300Mbps for maximum throughput. It can also

interoperate with other wireless (802.11b, 802.11g) products.

The adapter supports 64/128-bit WEP, WPA and WPA2 encryption to

prevent outside intrusion and protect your personal information from

being exposed.

The adapter is easy to install and manage. The Quick Setup Wizard

guides you step-by-step through the installation process; the Rosewill

Wireless N Client Utility helps you create a wireless connection immediately.

With unmatched wireless performance, reception, and security protection,

the RNX-N250PCE is the best choice for easily adding or upgrading

wireless connectivity to your notebook and computer.

Wireless N Adapter RNX-N250PCe Quick Installation Guide

3 System Requirement

You must have at least the following

●

A desktop PC with an available working PCI-Express slot

●

At least a 300MHz processor and 32MB of memory

●

Windows OS for Win98SE, ME, 2000, XP, Vista, Win7

●

A CD-ROM Drive

●

A 802.11n 、802.11g or 802.11b Wireless Access Point/Router

(for infrastructure Mode) or another 802.11n、802.11g or 802.11b

wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode).

4 Driver and Hardware Installation

4.1 Driver installation of the Wireless PCI-E Adapter

Turn on the computer and Insert the Wireless 11N PCI-E Adapter

Driver CD in the CD-ROM drive. The Install Screen will appear. If not,

click the Start button and choose Run and enter D:\autorun.exe

(if ‘D’ is the letter of your CD-ROM drive)

Select Drivers, choose the modem of your product and operate

according to the instruction. The following is the step-by-step

instructions in Windows XP. The steps and screens are similar for

the other Windows operating systems.

►

Select language and then click Next

Wireless N Adapter RNX-N250PCe Quick Installation Guide

►

Click Next

►

Click Install

Wireless N Adapter RNX-N250PCe Quick Installation Guide

►

Click Finish to finish the driver installation

4.2 Hardware installation of the Wireless PCI-E Adapter

4.2.1 Install the Wireless 11N PCI-E adapter into your computer

●

Make sure to turn off your computer and unplug the power cord.

Remove the back cover of the computer.

●

Install the wireless 11N PCI-E Adapter carefully and firmly seat it into

an available PCI-E slot (to avoid damage caused by static electricity,

make sure to properly ground yourself by first touching a metal part of

your computer to discharge any static electricity before working with the

wireless 11N PCI-E Adapter).

●

Secure the wireless 11N PCI-E Adapter back panel shield with a screw.

●

Replace the computer’s cover.

●

Place the computer back in its normal position.

●

Attach the wireless 11N PCI-E Adapter’s antenna to the socket on the

back panel shield.

4.2.2 Restart your computer

Turn on the computer, the Found New Hardware Wizard (windows XP)

screen will appea r:

►

Select Install the software automatically (Recommended) and then

click Next

►

Click Finish to finish the hardware installation

The installation is completed.

Wireless N Adapter RNX-N250PCe Quick Installation Guide

5 Connecting to a wireless network

5.1

Connecting with Microsoft Zero Configuration tool (Win XP)

After specifying the Microsoft Zero Configuration tool to configure your

wireless network, right click on the icon on system tray.

Select “View Available Wireless Networks” to specify your

wireless network.

The tool shows the available wireless networks. Select your demanding

network to connect with. To connect to a wireless network, please click

Change advanced settings to be compatible with your wireless

network settings.

5.2

Connecting with Window 7

You can easily access to wireless with Win7.

First, move your mouse to lower right hand corner as below and click

on the icon where arrow pointing to.

Wireless N Adapter RNX-N250PCe Quick Installation Guide

Click Refresh to get an update of your Wireless Network Connection.

This should help you search the SSID of the network you want to

connect to.

Select your desired SSID, then Click “Connect”.

You will be prompt to ask you entering the network security key.

Once entered, please click OK to complete.

You should see below in a very short period and find out whether

you are connected or now.

Wireless N Adapter RNX-N250PCe Quick Installation Guide

6 FAQ

This chapter provides solutions to problems that may occur during the

installation and operation of the Wireless USB Adapter.

Read the descriptions below to solve your problems.

1. I cannot communicate with the other computers linked via

Ethernet in the Infrastructure configuration.

Make sure that the PC to which the Adapter is associated is

powered on.

Make sure that your Adapter is configured on the same channel and

with the same security options as with the other computers in the

Infrastructure configuration.

2. What should I do when the computer with the Adapter installed is

unable to connect to the wireless network and/or the Internet?

Check that the LED indicators for the broadband modem are

indicating normal activity. If not, there may be a problem with the

broadband connection.

Check that the LED indicators on the wireless router are functioning

properly. If not, check that the AC power and Ethernet cables are

firmly connected.

Check that the IP address, subnet mask, gateway, and DNS settings

are correctly entered for the network.

In Infrastructure mode, make sure the same Service Set Identifier

(SSID) is specified on the settings for the wireless clients and

access points.

Wireless N Adapter RNX-N250PCe Quick Installation Guide

In Ad-Hoc mode, both wireless clients will need to have the same SSID.

Please note that it might be necessary to set up one client to establish

a BSS (Basic Service Set) and wait briefly before setting up other clients.

This prevents several clients from trying to establish a BSS at the same

time, which can result in multiple singular BSSs being established,

rather than a single BSS with multiple clients associated to it.

Check that the Network Connection for the wireless client is

configured properly.

If Security is enabled, make sure that the correct encryption keys are

entered on both the Adapter and the access point.

Thank you for purchasing a quality Rosewill Product.

Please register your product at: www.rosewill.com for

complete warranty information and future support for your product.

Altri manuali per RNX-N250PCe

Indice

Altri manuali Rosewill Adattatore

Rosewill

Rosewill RNX-N250PC Manuale utente

Rosewill

Rosewill RC-221 Manuale utente

Rosewill

Rosewill RNX-N150NUB Manuale utente

Rosewill

Rosewill N900UBE Manuale utente

Rosewill

Rosewill RNX-G1-G1W Manuale utente

Rosewill

Rosewill RC203 Manuale utente

Rosewill

Rosewill RNX-AC600HGUBE Manuale utente

Rosewill

Rosewill RNX-G300EX Manuale utente

Rosewill

Rosewill Wireless Adapter RNX-EasyN1 Manuale utente

Rosewill

Rosewill RCW608 Manuale utente

Rosewill

Rosewill RC103 Manuale utente

Rosewill

Rosewill RNX-N180UBE Manuale utente

Rosewill

Rosewill RNX-N250UB Manuale utente

Rosewill

Rosewill Wireless Adapter RNX-EasyN1 Manuale utente

Rosewill

Rosewill RNX-N150PC Manuale utente

Rosewill

Rosewill RCAD-11001 Manuale utente

Rosewill

Rosewill WIRELESS N ADAPTER RNX-N150UBE Manuale utente

Rosewill

Rosewill AC1200UBE Manuale utente

Rosewill

Rosewill RNX-N180UB Manuale utente

Rosewill

Rosewill RCW604 Manuale utente

Rosewill

Rosewill Ethernet Adapter Manuale utente

Rosewill

Rosewill RNX-AC600NUBv2 Manuale utente

Rosewill

Rosewill RNX-MININ1 Manuale utente

Rosewill

Rosewill AC600 Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente