Ross HDR-8610USB Manuale utente
HD+ Digital Satellite Recorder
User Manual
MODEL NUMBER
HDR-8610USB
Please read this Manual thoroughly before using your
Recorder and then retain for future reference.
HD+Digital Satellite Recorder
1. Important Safety Instructions p1
1.1 Safety Information p1
1.2 General Information p2
2. In the Box p2
3. Controls and Functions p3
3.1 Front Panel p3
3.2 Rear Panel p3
3.3 Remote Control p4
3.4 Remote Control Functions p5
4. Installation p7
4.1 Satellite Dish Installation (REFER TO SEPARATE INSTRUCTIONS) p7
4.2 Recorder Installation p7
4.2.1 Connecting your Recorder p7
4.2.2 Preparing your Remote Control p7
4.2.3 TV Format Set-Up p7
4.2.4 Check Satellite Signal Reception p8
4.2.5 Fast Channel Set-Up Astra 2/A/B/D/Eurobird 1 p8
4.2.6 Chosen Satellite Scan p8
5. Menu System p9
5.1 Installation Menu p9
5.1.1 Selecting your Satellite p9
5.1.2 Selecting your SCAN Mode p9
5.2 Channel Edit Menu p9
5.2.1 TV Channel Edit p10
5.2.2 Radio Channel Edit p11
5.2.3 Set TV Favourites p11
5.2.4 Set Radio Favourites p11
5.2.5 Program Back Up p11
5.3 System Menu p12
5.3.1 System Setting p12
5.3.2 Local Time Setting p12
5.3.3 Timer p13
5.3.4 System Information p13
5.4 User Settings (User’s Conference) p14
5.4.1 Parental Control p14
5.4.2 OSD Control p15
5.4.3 Multimedia p15
5.4.3.1 HDD Management p15
5.4.3.2 Media and Folder Management p16
6. Personal Video Recorder (PVR) p18
6.1 Time-Shift Recording (TSR) p18
6.2 General TV Recording p19
6.3 Timed Recordings p19
6.4 Recording to USB Device p20
7. PIP p21
7.1 Advanced PIP Controls p21
7.2.1 Active Sub Window (Red Button) p21
7.2.2 Remain Sub Window (Yellow Button) p21
8. Advanced Installation p22
8.1 Antenna Setting p22
8.2 Transponder p23
8.3 MotorConguration(DiSEqC1.2) p24
8.4 USALS(DiSEqC)SetUp p24
8.5 Tuner Set-Up p25
9. Software Update p25
10. Trouble Shooting p26
11. Specication p27
Contents
1
1.0ImportantSafetyInstructions
1.1 Safety Information
•Read these Instructions carefully and retain for future reference. If you sell, or give
this Receiver away be sure to pass on the Instructions.
• There are no user serviceable parts inside this unit. DO NOT remove the cover there
are dangerous voltages inside. Electric shock hazard.
• This unit operates from a 170~240V 50Hz Supply. Consumption is ~25W.
• During use, this device may become warm, this is normal. DO NOT allow anything
to block the ventilation slots as this may cause overheating and a consequent risk
of re.
• DO NOT place naked ames (such as candles) on this equipment.
• DO NOT stand other equipment on this unit.
• DO NOT operate close to heaters or other heat sources.
• DO NOT stand on soft furnishings.
• MAKE SURE there is a minimum clearance of 5cm on all sides of the unit.
• DO NOT allow anything to trap, pinch or otherwise damage the Power Cord. If the
power cord should become damaged IMMEDIATELY switch the Receiver off at
the wall and unplug it. You should then contact your Service Centre to carry out a
repair.
• DO NOT overload the wall socket, this can be dangerous and lead to a re hazard.
• MAKE SURE you have easy access to the mains plug in case of emergency
• DO NOT unplug the unit by pulling the Power Cord, always grasp the plug rmly
and pull from the wall socket.
• DO NOT stand items such as water lled vases on this Receiver.
• DO NOT operate this unit in damp conditions or allow water or other uids to enter
the enclosure. If this happens, switch off IMMEDIATELY and refer the device to the
Ross Helpline.
• DO NOT touch the mains plug or power cord with wet hands. Electric shock Hazard.
• DO NOT connect or disconnect cables from this receiver when it is turned on.
Switch off the power rst or this unit or other equipment may be damaged. This is
most important for the cable from the Dish (LNB).
• MAKE SURE the LNB cable outer is earthed.
• DO NOT clean this device using solvent based products. Use only a soft dry cloth.
2
1.2 General Information
•Thank you for choosing a Ross Digital Satellite TV Receiver. Treated with care and used in
accordance with the contents of this manual it will provide many years of reliable service.
• This symbol indicates that, at the end of its useful life, this product must
not be disposed of with normal domestic waste. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
please recycle it responsibly. You can return your used device using the
return and collection service or contact the retailer where the product was
purchased. Batteries used in operating this product may contain toxic
agents that are hazardous to the environment. Therefore, as with the unit
itself, dispose of the batteries according to the prevailing statutory
regulations. Never put the batteries in normal household waste.
• This receiver conforms to all applicable EU Legislation for this type of
product. Further information can be obtained from Ross if required.
2.0IntheBox
Please open your box carefully and check the contents which should be as per the list
below. If anything is missing please contact the Ross Helpline.
• HD+ Satellite Recorder (Set Top Box)
• Remote Control (NOTE: 2 x AAA Batteries not included)
• HDMI Cable
• User Manual
3.0Controls&Functions:
3.1 Front Panel
- Standby Button - Volume Up Button
- Menu Button - Channel Up Button
- Volume Down Button - USB Socket
- Channel Down Button - OK Button
3.2 Rear Panel
- LNB IN to Tuner A and B - To connect the input cables from the satellite dish.
- LNB OUT from Tuner A and B - To connect to other satellite recorders if required.
- DIGITAL AUDIO - Socket for connecting digital audio cable.
- VCR SCART - For the video/audio input of a VCR or DVD.
- S/PDIF - S/PDIF format sound through optical output.
- TV SCART - For the video/audio input of the TV for SD viewing only.
- A/V RCA - To connect the Audio/Video RCA/composite output to TV.
- Y/Pb/Pr - To connect component video YUV output to TV
- HDMI - To connect an HDTV using HDMI cable for HD (High Denition viewing)
- USB - For connecting USB device.
- Mains Cable
Standby
MENU
OK
3
A
B
C
D
A
B
D
E
F
G
H
CEF G
A
B
C
E
D
F
G
H
I
J
K
H
B E F H I
A C D G J K
4
1
POWER
TIMER
NUMERIC BUTTONS
16:9
LANG
CH+/-
VOL+/-
OK
MENU
INFO
SAT
ZOOM
BACKWARD
FORWARD
PREVIOUS
NEXT
MEDIA
PIP
2
4
5
6
7
8
9
10
11
12
13
14
15
16
18
17
19
3.3 Remote Control
MUTE
AUDIO
SUBTL
RECALL
PAGE UP/DOWN
TIMESHIFT
V-FORMAT
EXIT
TXT
TV/RADIO
PAUSE
STOP
PLAY/PAUSE
RECORD
SLOW
HDD
PVR
21
22
23
24
27
26
28
29
30
31
32
33
34
35
36
37
38
TIMER
20
FAVOURITE
25
EPG 3
3.4 Remote Control Functions
Button Function
POWER: Turns on the power or switches the unit to standby mode
TIMER:Toselectupto8timersequencesofyourchoice.
EPI:ShowsNowandNextEPGfortheprogrammebeingviewed.
NUMERIC BUTTONS: Enter a number to select a channel directly or to select the
menuoptions.
16:9:ChangesscreendisplaybetweenAuto,16:9and4:3.
LANG:PresstoselectOSDlanguagepreference.
CH +/-:Upanddownselectforchannels.Alsousedinmenuoperations.
VOL +/-:Volumeup/down.Orchangepagesonthechannellist.Alsousedin
Menuoperations.
OK:Displaysthechannellistandselectstheitemonthemenu.Wheninthemenu
pressOKtosavesettingandexit.
MENU:OpenthemainmenuduringTVviewing.
INFO/EPG:Displayssatelliteandtransponderinformationforthecurrentprogramme.
SAT: Todisplaythesatellitelistorchannellistintheviewingmode.IntheAntenna
SettingortheTranspondermenupressSATtoinitiateascan.(Redbuttontoadd
satellite)
ZOOM: (AVAILABLE ON SD CHANNELS ONLY).(Greenbuttontoaddsatellite).
Presstorewind.(selectFR*2,FR*4,FR*8,FR*16fordifferentspeeds)
Presstofastforward.(selectFF*2,FF*4,FF*8,FF*16fordifferentspeeds)
Presstochoosethepreviousmediale.
Presstochoosethenextmediale.
MEDIA:PresstoenterSATAHDDmultimediamemorypartitions.
PIP:PressthebuttontoenterPIPmenu(pictureinpicturemode).
TIMER (Sleep): Press to set the power off time periods-available;10mins,30mins,
60mins,90minsandpresstheOKbuttontosetSLEEPtimeron.Alternativelyuse
numerickeystosetyourpreferredtimeinuserdefaultmode.
MUTE:Turnsthesoundoffandthenbackonwithasecondpress.
AUDIO:Changeaudiooutputbetween;left,rightandstereo.IntheAntennaSetting
menupressAUDIOtoeditthesatellite.IntheTranspondermenupressAUDIOtoeditTP.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
5
22
Button Function
SUBTL:SetsbroadcastdependantsubtitlesforthecurrentTVprogramme.
RECALL: Press to switch to previously watched channel.
FAV: Select favourite channel list or current channel list in the view mode.
TIMESHIFT:PausesliveTVsothatyouenter‘TImeshift’mode.
PAGE UP/DOWN: Press to jump one page up or down.
V-FORMAT:Presstoselectthevideooutputmodebetween;1080I,720Pand576P.
Whenchangingvideoformat,therewillbeaickerforafewsecondsastheformat
adjusts.
EXIT:Presstoexitandsavefromcurrentmenu.
TXT: (NOT AVAILABLE ON THIS MODEL).
TV/RADIO:SwitchesbetweenTVandRadiochannels.(BluebuttontodeleteSatellites).
PAUSE:Freezethescreen.(YellowbuttontoeditSatellite).
STOP:PresstoSTOPplaybackwhenwatchingarecording,playingbackamedialeor
tostoparecording.
PLAY/PAUSE:Presstostartwatchingorpausingarecordingormedialeortoplayback
afterpausingliveTVin‘Time-Shift’mode.
RECORD:Presstostartrecording.
SLOW:Presstoslowdownvideorecordings.
HDD: Press to enter and select the hard disc partition when you wish your
recordings to be saved
PVR:ToenterthecurrentlyselectedPVRmemoryletoplaybackyourrecordings.
Please observe the following when using your Remote Control –
•Change the batteries when operation becomes poor or erratic.
•Always use two new batteries, DO NOT mix old and new.
•Dispose of old batteries in an environmentally responsible way.
•DO NOT place spent batteries in a re or attempt to recharge them.
•If you are not going to use the Remote Control for an extended period then remove the
batteries to avoid the risk of leakage.
Satellite Recorders are delicate pieces of digital equipment that performs quite
complex functions. Occassionally they can lock up for no apparent reason. If this
happens to your recorder, simply unplug the recorder. Then plug recorder back on and
re-boot. If problem persists please contact Ross helpline.
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
6
7
4.0Installation:
Introduction
This manual will help you learn the basic use of your recorder such as installation,
selecting channels and many other functions of the set top box.
4.1 Satellite Dish Installation
Please refer to the separate documentation “Satellite Dish Installation Guide” to install
your dish. You will need to assemble, erect and roughly align your dish to your chosen satellite
before connecting up and turning on your Recorder.
4.2 Recorder Installation
4.2.1ConnectingyourRecorder
Having completed the assembly and erection of your dish connect the satellite cables from your
dish to the LNB IN terminals on your recorder and your HDMI lead from the rear of your recorder
to an available socket on your TV or AV Amplier. If you are not using an HD compatible TV then
you will need to connect to your TV using a SCART lead and optionally the Optical Audio Out to
an AV Amplier. If you are using the HDMI socket then you only need to connect this as it feeds
both high quality audio and video to your TV. Finally, plug your Recorder mains plug into a wall
socket but do not switch it on yet.
4.2.2PreparingyourRemoteControl
Your Remote Control requires 2 x AAA (LR03) batteries to operate. Open the cover on the rear of
the Remote Control by sliding it downwards and insert two batteries taking care to observe the
polarity markings inside the compartment.
4.2.3TVFormatSet-Up
You are now ready to switch on and adjust your dish to complete alignment (for this refer to the
separate instructions). Turn on your TV and your Satellite Recorder (both at the wall socket and
on the rear of the unit). Proceed as follows:–
•Press the POWER button on your Remote Control or the STANDBY Button on the Front
Panel of the Recorder to turn the unit on.
•Select ‘English’ from the Language Choice Menu.
•Then select ‘O’ ENGLAND from the Country Choice Menu
•If you get a ‘Mode not supported’ message on your TV - You need to alter the Recorder
resolution to match the resolution of your TV – The factory default is 720p.The Resolution is
changed by pressing the ‘V Format’ button on your remote control. Adjust between 480,
576, 720 and 1080i TV Resolutions as required. 1080i is the highest available resolution for
HD channel reception.
•Make sure your TV source is set to receive the signal from your Recorder.
NOTE: If you are using this Recorder in conjunction with a pre-installed dish which is already
aligned to ASTRA/EURO1 then at this point you will see “NO CHANNEL” being displayed.
At this point press the “OK” button and your Channel list should be displayed showing all the
programmes that were loaded onto the recorder during manufacture. Your Recorder is now
ready to use.
Indice
Altri manuali Ross Ricevitore
