4
Introduction
The R-Tech TIG200DV is a member of our field acclaimed family of welding products.
Premium features include:-
1. Inverter power source – more efficient to operate, provides smoother weld characteristics.
2. Use either 110V or 240V input, machine automatically sense voltage input.
3. Full Featured Pulse welding in DC Tig welding mode
4. HF Arc start – Easy arc striking and prolonged tungsten life
5. Slope up / slope down
6. Remote foot pedal option
7. Digital amp meter
8. Industrial 60% Duty cycle at maximum amps @ 40C
Recommended Processes
The R-Tech TIG200DV is recommended for the Tig welding processes within its output capacity of
200 Amps (240V) and 140 Amps (110V)
Equipment Limitations
The R-Tech TIG200DV is protected from overloads beyond the output ratings and duty cycle as per
machine specifications with thermostat protection of the output coils and rectifiers.
Welding Capability – Duty Cycle
The R-Tech TIG200DV is rated at 60% duty cycle on a ten minute basis. If the duty cycle is
exceeded a thermal protector will shut machine off until the machine cools.
Model No. R-Tech TIG200DV
Input 110V/240V AC 50/60Hz Fuse rating 32A
MMA No-load Voltage 60V – 80V
Current Range / Duty Cycle 240V 5A – 160A (240V) / 160A 60% @40C
Current Range / Duty Cycle 110V 5A – 120A (110V) / 120A 60% @40C
DC TIG No-load Voltage 60V – 80V
Current Range 240V 5A – 200A (240v)
Current Range 110V 5A – 140A (110v)
Duty Cycle TIG 240V 60% @ 200A
Duty Cycle TIG 110V 60% @ 140A
Up-Slope Time 5 Seconds
Down-Slope Time 5 Seconds
Pulse Frequency Range 0.5Hz – 25Hz
Pulse Width Range 0.1 – 0.9 Seconds
Pulse Amperage Range Min – 200A
Gas Post Flow Time 1 – 10 Seconds
Arc Starting Mode High Frequency
Gross Weight 16 KG
Insulation IP21S
Dimensions mm 425 x 195 x 310
