Ruijie Networks RG-S2628G-E Manuale di installazione e funzionamento
RG-S2600E Series Switch
Hardware Installation and Reference Guide V1.31
Copyright Statement
Ruijie Networks©2015
Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,
transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,
without the prior written consent of Ruijie Networks is prohibited.
, , , , ,
, ,, ,
, , are registered trademarks of Ruijie Networks.
Counterfeit is strictly prohibited.
Exemption Statement
This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain
the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will
not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.
Preface
Thank you for using our products. This manual will guide you through the installation of the device.
This manual describes the functional and physical features and provides the device installation steps, hardware
troubleshooting, module technical specifications, and specifications and usage guidelines for cables and connectors.
Audience
It is intended for the users who have some experience in installing and maintaining network hardware. At the same time, it
is assumed that the users are already familiar with the related terms and concepts.
Obtaining Technical Assistance
Ruijie Networks website: http://www.ruijienetworks.com/
Online customer services: http://webchat.ruijie.com.cn
Customer service center: http://www.ruijie.com.cn/service.aspx
Customer services hotline: +86-4008-111-000
BBS:
http://support.ruijie.com.cn
Customer services email: Consulting@ruijienetworks.com
Related Documents
Documents Description
Configuration Guide Describes network protocols and related mechanisms that supported by the
product, with configuration examples.
Command Reference Describes the related configuration commands, including command modes,
parameter descriptions, usage guides, and related examples.
Symbol Conventions
Means reader take note. Notes contain helpful suggestions or references.
Means reader be careful. In this situation, you might do something that could result in equipment damage
or loss of data.
Product Overview
RG-S2600E switch series is applied at the access layers of small- and medium-sized networks to provide line-speed
switching and complete QoS services and ensure the undelayed transmission of key data by applying different traffic
classification rules to different services. RG-S2600E switch series provides flexible medium interfaces and meets the
connection requirements of different media in network constructions.
Table 1-1 RG-S2600E Switch Series
Model 10/100Base-T
Ethernet Port
10/100/1000Base-T
Ethernet Port
1000Base-X
SFP Port
Console
Port
Extension
Module
Slot
RG-S2628G-E 24 2 2 1 1
RG-S2652G-E 48 2 2 1 1
RG-S2628G-P V1.XX 24 2 2 1 1
RG-S2628G-P V2.XX 24 None 4 1 None
RG-S2652G-P 48 2 2 1 1
RG-S2628G-E
Specifications
Model RG-S2628G-E
Module Type FE-SFP-LX-MM1310
FE-SFP-LH15-SM1310
Mini-GBIC-SX
Mini-GBIC-SX
Mini-GBIC-LX
Mini-GBIC-LH40
Mini-GBIC-ZX50
Mini-GBIC-ZX80
Mini-GBIC-ZX100
Mini-GBIC-GT
The supported module type may change at any time. For the detailed change
information, consult Ruijie Networks.
Extension Module M3000E-02SFP/GT
M3000E-STACK
SFP Port 100Base-X
1000Base-X
RPS Type Not supported
Power Supply AC input:
Rated voltage range: 100–240 VAC
Maximum voltage range: 90–264 VAC
Frequency: 50–60 Hz
Rated current: 2 A
HVDC input:
Maximum voltage range: 192 to 290 VDC
Rated current: 0.3 to 0.17 A
PoE Not supported
Max, Power
Consumption
With extension modules: 27W;
Without extension modules: 23W
Temperature Operating temperature: 0ºC to 50ºC;
Storage temperature: -40ºC to 70ºC
Humidity Operating humidity: 10% to 90% RH;
Storage humidity: 5% to 90% RH
Fan Fanless
Temperature
Warning Support
EMC Standards GB9254-2008 Class A
Safety Standards GB4943-2001
Dimensions
(W x H x D) 440 mm x 44 mm x 260 mm
Weight With extension modules: 4.4 kg
Without extension modules: 3.9 kg
Product Appearance
The front panel of the RG-S2628G-E switch provides twenty-four 10/100Base-T Ethernet ports, two gigabit SFP fiber
optic/copper combo ports and one console port. The back panel provides AC power input ports and one extension module
slot.
Figure 1-1 Appearance of the RG-S2628G-E Switch
Front Panel
Figure 1-2 Front Panel of the RG-S2628G-E Switch
Note:
1. Switch status indicator
2. Extension module indicator
3. Extension port 1 status indicator
4. Extension port 2 status indicator
5. Console port
6. 10/100Base-T adaptive Ethernet
port
7. 10/100Base-T adaptive Ethernet port indicator
8. 10/100/1000Base-T adaptive Ethernet port
9. 100/1000Base-X SFP port
10. 10/100/1000Base-T adaptive Ethernet port indicator
11. 100/1000Base-X SFP port indicator
Back Panel
Figure 1-3 Back Panel of the RG-S2628G-E Switch
Note: 1. Grounding pole
2. 3-core AC power interface
3. Cable plug retention clip
4. Extension module slot
Power Supply System
RG--S2628G-E powered either with AC power or DC power.
AC input:
Rated voltage range: 100–240 VAC
Maximum voltage range: 90–264 VAC
Frequency: 50–60 Hz
Rated current: 2 A
The power cable requirement: 10 A power cable
HVDC input:
Maximum voltage range: 192 V to 290 V
Rated current: 0.3 A to 0.17 A
Power cord: 10A power cable
Heat Dissipation System
The RG-S2628G-E is designed with no fans. To ensure good dissipation, sufficient ventilation space (10 cm distance from
both sides and the back panel of the device) should be reserved to avoid blocking the air intake of the device; otherwise,
the dissipation might be affected. Dust the device every three months to avoid blocking the ventilation openings.
LED Indicators
Indicator Panel
Identification
Status Meaning
Off The switch is NOT receiving power.
Blinking green Initialization is in progress. Continuous blinking
indicates errors.
Solid green The switch is operational.
Solid yellow The switch gets a temperature warning. Check
the operating environment of the switch.
Status indicator Status
Solid red The switch is faulty.
Off The module is not connected or installed.
Extension module
indicator
Module Solid green The module is operational.
Off The port is NOT connected.
Solid green The port is connected at 1000Mbps.
Blinking green The port is transmitting or receiving data at
1000Mbps.
Solid yellow The port is connected at 100/10Mbps.
Extension module port
indicator
for the M3000E-02SFP/GT
Blinking yellow The port is transmitting or receiving data at
100/10Mbps.
Off The stack port is NOT connected.
Solid green The stack port is connected.
Extension module port
indicator
For the M3000E-STACK
A/B
Blinking green The stack port is transmitting or receiving data.
Off The port is NOT connected.
Solid green The port is connected at 100Mbps.
Blinking green The port is transmitting or receiving data at
100Mbps.
Solid yellow The port is connected at 10Mbps
10/100Mbps RJ-45 port
indicator 1~24
Blinking yellow The port is transmitting or receiving data at
10Mbps.
Off The port is NOT connected.
Solid green The port is connected at 1000Mbps.
Blinking green The port is transmitting or receiving data at
1000Mbps.
Solid yellow The port is connected at 100Mbps.
1000Mbps SFP port
indicator 25F, 26F
Blinking yellow The port is transmitting or receiving data at
100Mbps.
Off The port is NOT connected.
1000Mbps RJ-45 port
25, 26
Solid green The port is connected at 1000Mbps.
Indicator Panel
Identification
Status Meaning
Blinking green The port is transmitting or receiving data at
1000Mbps.
Solid yellow The port is connected at 100/10Mbps.
indicator
Blinking yellow The port is transmitting or receiving data at
100/10Mbps.
RG-S2652G-E
Specifications
Model RG-S2652G-E
Module Type FE-SFP-LX-MM1310
FE-SFP-LH15-SM1310
Mini-GBIC-SX
Mini-GBIC-SX
Mini-GBIC-LX
Mini-GBIC-LH40
Mini-GBIC-ZX50
Mini-GBIC-ZX80
Mini-GBIC-ZX100
Mini-GBIC-GT
The supported module type may change at any time. For the detailed change
information, consult Ruijie Networks.
Extension Module
Type
M3000E-02SFP/GT
M3000E-STACK
SFP Port 100Base-X
1000Base-X
RPS Type Not supported
Power Supply AC input:
Rated voltage range: 100–240 VAC
Maximum voltage range: 90–264 VAC
Frequency: 50–60 Hz
Rated current: 2 A
PoE Not supported
Max. Power
Consumption
With extension modules: 38W;
Without extension modules: 34W
Temperature Operating temperature: 0ºC to 50ºC;
Storage temperature: -40ºC to 70ºC
Humidity Operating humidity: 10% to 90% RH;
Storage humidity: 5% to 90% RH
Fan Support adjustment of fan speed and warning of fan troubles.
Temperature
Warning Support
EMC Standards GB9254-2008 Class A
Safety Standards GB4943-2001
Dimensions
(W x H x D) 440 mm x 44 mm x 300 mm
Weight With extension modules: 4.9 kg;
Without extension modules: 4.4 kg
Product Appearance
The front panel of the RG-S2652G-E switch provides forty-eight 10/100Base-T Ethernet ports, two gigabit SFP fiber
optic/copper combo ports and one console port. The back panel provides AC power input ports and one extension module
slot.
Figure 1-4 Appearance of the RG-S2652G-E Switch
Front Panel
Figure 1-5 Front Panel of the RG-S2652G-E Switch
Note:
1. Switch status indicator
2. Extension module indicator
3. Extension port 1 status indicator
4. Extension port 2 status indicator
5. Console port
6. 10/100Base-T adaptive Ethernet
port
7. 10/100Base-T adaptive Ethernet port indicator
8. 10/100/1000Base-T adaptive Ethernet port
9. 100/1000Base-X SFP port
10. 10/100Base-T adaptive Ethernet port indicator
11. 100/1000Base-X SFP port indicator
Back Panel
Figure 1-6 Back Panel of the RG-S2652G-E Switch
Note:
1. Grounding pole
2. 3-core AC power
interface
3. Cable plug retention
clip
4. Fan outlet
5. Extension module slot
Power Supply System
RG-S2652G-E adopts the AC power input.
AC input:
Rated voltage range: 100–240 VAC
Maximum voltage range: 90–264 VAC
Frequency: 50–60 Hz
Rated current: 2 A
The power cable requirement: 10 A power cable
Heat Dissipation System
The RG-S2652G-E adopts turbine fans for heat dissipation purposes, thereby ensuring the device to function normally in
the specified environment. At least 10 cm distance space should be reserved around both sides and the back panel of the
cabinet to allow air circulation. Dust the device every three months to avoid blocking the ventilation openings.
Figure 1-7 Flow Scheme of Heat Dissipation
LED Indicators
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Ruijie Networks Interruttore
Ruijie Networks
Ruijie Networks RG-ES126S Manuale utente
Ruijie Networks
Ruijie Networks RG-S7808C Series Manuale utente
Ruijie Networks
Ruijie Networks RG-S6930-2C Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S12006 Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S2600E Series Manuale di istruzioni
Ruijie Networks
Ruijie Networks RG-ES05 Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-N18014 Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S2910C-24GT2XS-P-E Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S6220-48XS4QXSV1 Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S2910C-XS-P Series Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S12000 Series Manuale utente
Ruijie Networks
Ruijie Networks RG-S8605E Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks XS-S1960-24GT4SFP-H Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S2628G-I Manuale di installazione e funzionamento
Ruijie Networks
Ruijie Networks RG-S6200 Series Manuale utente
Ruijie Networks
Ruijie Networks RG-S7800C Series Manuale utente
Ruijie Networks
Ruijie Networks RG-IS2700G Series Manuale utente
Ruijie Networks
Ruijie Networks RG-S6220 Series Manuale utente
