Saitek Pro Flight Throttle Quadrant Manuale utente
ENGLISH
GETTING STARTED 4
INTRODUCTION 5
INSTALLATION 6
IMPORTANT INFORMATION 6
ST PROGRAMMING SOFTWARE 7
FRANÇAIS
DÉMARRAGE 13
INTRODUCTION 14
INSTALLATION 14
INFORMATION IMPORTANTE 15
ST PROGRAMMING SOFTWARE 16
DEUTSCH
ERSTE SCHRITTE 22
EINFÜHRUNG 23
SOFTWAREINSTALLATION 23
WICHTIGE INFORMATIONEN 24
ST PROGRAMMING SOFTWARE 25
ITALIANO
AVVIO 30
INTRODUZIONE 31
INSTALLAZIONE 32
INFORMAZIONI IMPORTANTI 32
ST PROGRAMMING SOFTWARE 33
ESPAÑOL
PRIMEROS PASOS 38
INTRODUCCIÓN 39
INSTALACIÓN 39
INFORMACION IMPORTANTE 40
ST PROGRAMMING SOFTWARE 41
4
GETTING STARTED : QUADRANT
5
ENGLISH
INTRODUCTION
Congratulations on buying the Saitek Pro Flight Throttle Quadrant. The Pro Flight Throttle Quad-
rant features realistic controls congurable for all the major ight simulation software to make
your ying experiences more realistic.
INSTALLING THE THROTTLE QUADRANT
First, screw the clamp to the throttle quadrant using the four
screws provided.You can screw the clamp to one of two sides of the
quadrant depending on how you want to mount the quadrant - either
in front and below your table or on top of it. Please note that whichever
way you choose to mount the quadrant, ensure that as you look at the unit the rocker switches
are at the bottom. Now tighten the throttle unit clamp screw mechanism until it is rmly attached
to your table (be careful not to overtighten the screw as you may damage the clamp).
Plug the throttle quadrant’s USB cable into one of your PC’s free USB ports (or Saitek Pro Flight
Yoke USB Hub).
Your throttle quadrant comes supplied with additional lever knobs to congure any combination
of throttle, aps, mixture or prop pitch. You can also buy additional quadrants to link together
for more complex multi-engined aeroplane congurations and we have included a 4-way
throttle knob which links 4 quadrant levers for control of 4-engined aircraft.
6
INSTALLATION FOR WINDOWS® 8, 8.1, 7, AND VISTA. INCLUDES ALL 32- AND 64-BIT VERSIONS
IMPORTANT: PLEASE INSTALL DRIVERS BEFORE INSTALLING SOFTWARE
DRIVER INSTALLATION
1. Visit Saitek.com to download the latest drivers and software for your operating system.
2. With device disconnected, follow the onscreen instructions to complete the installation.
3. At the Driver Setup screen, only when prompted, insert USB cable into one of your
computer’s USB ports, then click Next.
4. At the Driver Setup screen, click Next to test your controller.
5. When the Saitek Controller screen appears, test the controls to verify device operation. After
the test, click OK.
SOFTWARE INSTALLATION
1. In the Software Setup screen, click Next and a pop-up box will ask if you “want to trust
software from Saitek.” Click yes, then click Next.
2. After installation, you have the option to Run Prole Editor, which will show you the
programming environment. To skip the Prole Editor now, uncheck the box and click Finish
to complete installation.
IMPORTANT INFORMATION
Driver updates
From time to time there may be updates to the driver and programming software for this prod-
uct. You can check for the latest software updates by visiting the Saitek website (www.saitek.
com) and clicking on Downloads. A drop-down menu will appear. Select Drivers and Software.
Enabling your controller in the game
Most games support game controllers, but typically default to the mouse and keyboard until
you go into the option menu within the game. The rst time you start a game after installing
your controller, go to the options menu within the main menu of the game and make sure your
controller is set up correctly. If you are having trouble working out how to do this, or if you’re
unsure whether the game itself supports game controllers, then please refer to the user manual
of that game for more help.
7
ENGLISH
HOW TO ASSIGN QUADRANT CONTROLS TO FLIGHT SIMULATOR FUNCTIONS
As you will normally be using the Pro Flight Quadrant alongside another controller in Flight Sim-
ulator, you will need to ensure that you set the levers up correctly within the game. By default,
Flight Simulator will assign them to control the ailerons, elevator and throttle, which will normally
be in addition to that which your other controller is already controlling; this will cause problems!
To reassign the levers correctly, you must use the Assignments (Flight Simulator 2004) or
Controls (Flight Simulator X) screen within the game. This is accessed from the Settings menu
within the game.
When you access the Assignments/Controls screen in Flight Simulator, ensure that the Saitek
Pro Flight Throttle Quadrant is selected in the option labeled Joystick Type.
Now select Joystick Axes (Flight Simulator 2004) or Control Axes (Flight Simulator X) at the top
of the window.
Once you have done this, simply nd the command that you want to assign to your controller
from the list of commands, click it and then click the Change Assignment button. A window will
appear asking you to move the part of your controller that you want to assign to that command -
move the axis that you want to assign to that command and then click OK.
Tip: You must ensure that none of the levers are assigned to the Aileron Axis or Elevator Axis
commands, otherwise they will interfere with your other controller that you are using alongside
the Saitek Pro Flight Throttle Quadrant.
If you wish to reassign the toggle switches on the Quadrant to other functions then you must
use the Buttons/Keys tab at the top of the Assignments/Controls window.
PROGRAMMINGYOUR SAITEK PRO FLIGHT THROTTLE QUADRANTWITH SAITEK SMARTTECHNOLOGY
SOFTWARE
Saitek Smart Technology Programming Software (SST) is the software Saitek supplies to
congure your Saitek controller for enhanced functionality. SST delivers a powerful set
of features, allowing you to program your device with the ultimate conguration for total
interaction. Despite a level of sophistication previously unseen in the market, and because of
the Saitek Smart Technology inside, the software remains simple and intuitive to use.
8
For a complete guide on how to program your Saitek controller, visit the Saitek website at www.
saitek.com or look at the help tab on your programming software menu.
Features of Smart Technology programming software:
• Quick and easy setup in any game
• Personalize the controller settings for your favorite games
• Congure your controller with an on-screen 3D model and interface
• Multiple setup option for each controller - ideal if a controller is used by several people and
you need more than one prole per device
• Program special moves with sophisticated timing features
• Special game setups available as ‘Proles’ from the Saitek website
What is a Prole?
A Prole is a custom setup for improved gameplay - consisting of a set of commands that are
pre-assigned to the buttons or axes of your controller. Pre-written Proles are available on the
Product Companion Disk that accompanies this device or on the Saitek Website - www.saitek.
com. (Please check the website for new or improved Proles, which are added regularly).
How do I program my controller?
After getting to know your controller, you can start creating your own personal Proles with the
Saitek Smart Technology programming software (SST). This software has virtually unlimited
programming capabilities and allows you to customize the controller to your exact gaming
needs.
The Prole Editor allows you to program the buttons on your controller to perform different
actions within your games - this is especially useful if the game you are using does not have its
own screen that allows reconguring of your buttons.
Getting Started
1. Double-click on the Saitek Smart Technology icon the install left on your desktop.
2. In the Prole Editor, choose the control to which you wish to assign a keyboard command.
You do this by left-clicking on the control’s cell in the control list on the right of the screen.
3. With the cursor ashing, type in the key commands and then click on the green tick mark
9
ENGLISH
when complete.
4. Repeat this procedure for all the buttons you would like to program and then click File, Save
at the top of the Prole Editor window.
5. Give the prole a name (it is recommended you name it after the game for which the prole is
intended) and then click Save.
6. To enable the prole either click the blue Prole Now icon at the top of the Prole Editor or
right-click on the controller icon in your taskbar and select the name of the prole from the
pop-up list of options.
7. You will notice that when a prole is loaded that the controller icon in your taskbar has a
green square behind it, indicating that a prole is currently loaded. If you wish to unload a
prole simply right-click on the controller icon and click Clear
Prole from the pop-up list of options.
If you require more detailed assistance with using the SST Programming Software,click on Help
at the top of the Prole Editor and then Manual.
TECHNICAL SUPPORT
From the support tab, you can access the following features by clicking on them:
SHOW TIPS
Once clicked, the tip screen will appear; this is the same screen that appears the
very rst time you run the ST software and you can run through all tips from this
screen if desired.
DOWNLOAD DRIVERS AND SOFTWARE
Clicking on this link will open your default browser and direct it to the download drivers and
software page.
DOWNLOAD GAME PROFILES
Clicking on this link will open your default browser and direct it to the download proles page.
From this page, choose your controller and a list of pre-made proles that match all the latest
10
games will appear.
READ ST PROGRAMMING MANUAL
The full ST programming manual will open in your default browser window.
CONTACT US
Clicking on Contact Us will open your default browser and direct it to the contact information
page; from here you can choose from a list of contacts.
2-YEAR LIMITED WARRANTY
Mad Catz warrants this product to be free from defects in materials and workmanship for the
warranty period. This non-transferable, two- (2) year limited warranty is only to you, the rst
end-user purchaser. If a defect covered by this warranty occurs AND you provide proof of
purchase, Mad Catz, at its option, will repair or replace the product at no charge.
The Mad Catz two- (2) year limited warranty is available to North American and European
customers. Your sole and exclusive remedy is repair or replacement of your Mad Catz product.
In no event shall Mad Catz liability exceed the original purchase price of the product. This
warranty does not apply to: (a) normal wear and tear or abusive use; (b) industrial, professional
or commercial use; (c) if the product has been tampered with or modied.
NORTH AMERICA AND EUROPE
To receive warranty service, you must:
1. Obtain a Return Authorization Number from Mad Catz Technical Support via ONE of the
following methods:
a. Submit a Ticket at http://support.madcatz.com
b. Call the Mad Catz Tech Support Center nearest you:
- North America: 1-800-659-2287 (USA) or 1-619-683-2815 (outside USA)
- United Kingdom: 01633 928072
- Europe (outside UK): +44(0) 1633 883110
- France: 01 82 88 01 80
- Germany: 089-21094818
- Spain: 93 181 63 94
Once you have your unique Return Authorization Number, do the following:
Altri manuali per Pro Flight Throttle Quadrant
1
Indice
Lingue:
Altri manuali Saitek Interruttore
