SANEI ELECTRIC SK1-V21A Guida rapida
Technical Guide
LINE THERMAL PRINTER
SK1-V21A
SK1-V31A
Rev1.0E
SK1-V21
A
/31
A
２
SK1-V21
A
/31
A
General notice
* The specifications may be changed for product improvement without notice.
* Updated information listed on our website. http://www.sanei-elec.co.jp
* Sanei shall not be responsible for any damages attributable to incorrect operation, handling or
improper operation environments, except those specified in this manual.
* Sanei shall not be responsible for any claim of infringement or alleged infringement
of patents, designs, trademarks, copyrights or other rights brought by a third party
in relation to its products.
* Operate this printer only in the manners as described in the Technical guide.
Otherwise, accidents or problems could possibly occur.
* Data are basically temporary; they cannot be stored or saved either for a long time or
permanently. Please note that Sanei Electric shall not be responsible for any damages or lost
profits resulting from the loss of data attributable to accidents, repairs, tests, and so on.
* If you have any questions, or notice any clerical errors or omissions regarding the information in
the technical guide, please contact your dealer.
* Please note that Sanei Electric shall not be responsible for any results or effects
resulting from operation of this Printer even if the information in the Technical guide.
３
SK1-V21
A
/31
A
Table of contents
Ⅰ．General Outlines................................................ ４
Ⅰ- 1．General Outlines .......................................................４
Ⅰ- 2．Features................................................................４
Ⅰ- 3．Classification .........................................................５
Ⅱ．Handling Method................................................. ７
Ⅱ- 1．Appearance .............................................................７
Ⅱ- 2．How to attach a panel ..................................................８
Ⅲ．Dimensions...................................................... ９
Ⅰ．General Outlines
Ⅰ- 1．General Outlines
SK1-V21/31 is a series of vertical type KIOSK printer unit based on standard type SK1-21/31.
Large paper holder, bezel unit can be attached to SK1-V21/31 as an option, as well as SK1-21/31.
Here is description about shapes of chassis in this document.
For further information, please refer to the SK1-21/31 Technical Guide.
Ⅰ- 2．Features
■Small and Ultra-Light Weight, Designed for wide variety of systems and equipments
■Max 200mm/sec high-speed printing
■Variety of paper core holders (adjustable for 2 different rolls)
■Available for Barcode printing and 2-dimensions code printing
■Max φ120mm paper roll as standard specifications
■Various Sensors built-in : Paper near end, Paper empty, Head open sensor, Black-Mark sensor
(Option), Gap sensor (Option)
■Wide variety of paper size (58, 60, 80, 83mm)
■Autoloading function
■Versatile operationg environment
＜Other functions＞
zCapable of HEX dump printing and test printing.
zVarious settings, such as enlarged characters, are available.
zLine spacing can be freely adjusted.
zGraphic printing by bit image.
zDownloaded characters and user-defined characters can also be printed.
zPaper feed amount can be set freely.
zWith Ruled Line command, table layouts can be easily printed.
zPage Mode allows erect/inverse images, clockwise 90 degrees/counterclockwise 90
degrees and overlapping printing.
zPage Mode allows setting the paper length to a maximum of 250mm.
zUsing the Image Registration command, the printing layout can be set up beforehand.
zWith the Printing Density command, the printing density can be changed.
zThe command system conforms to ESC/POS.
zCapable of registering print images in internal flash memory.
４
SK1-V21
A
/31
A
５
SK1-V21
A
/31
A
Ⅰ- 3．Classification
The product is classified according to the Product Number, as an example as below.
SK1-V31A S J 3 - 3 L Q B
Option
B ： Bezel
P ： Presenter
2-Dimensions Barcode
Q ： Installed
Without Q： Not available
Paper Core Diameter
L ： φ25.4mm
Without M/L： φ12mm
Paper Width
1 ：58.0mm
2 ：60.0mm
3 ：83.0mm
Without 1/2/3 ：80.0mm
Sensor：
1: Black mark（Right）
2: Black mark（Left）
3: Gap sensor
4: Gap sensor & Black mark（Right）
5: Gap sensor & Black mark（Left）
Without 1/2/3/4/5: None
Font
J ：Japanese Font
F ：ASCII
Interface
S ：Serial ＋USB
Series
SK1-V31A：3inch・Standard model
SK1-V30
：3inch・Large paper holder model
※Black mark(Right) does not correspond at the time of a paper 58/60mm setup in width.
SK1-V21A
６
SK1-V21
A
/31
A
S J 3 - 1 L Q B
Option
B ： Bezel
P ： Presenter
2-Dimensions Barcode
Q ： Installed
Without Q： Not available
Paper Core Diameter
L ：φ25.4mm
Without M/L：φ12mm
Paper Width
Without ：58.0mm
1 ：60.0mm
Sensor
Without：Reflection Sensor(Right)
1：Reflection Sensor(Left)
2：Gap Sensor + Reflection Sensor(Right)
3：Gap Sensor + Reflection Sensor(left)
Font
J ：Japanese
F ：ASCII
Interface
S ：Serial ＋USB
Series
SK1-V21A：2inch・Standard model
SK1-V20 ：3inch・Large paper holder model
Ⅱ．Handling Method
Ⅱ- 1．Appearance
７
SK1-V21
A
/31
A
Chassis
fixture hole
Head open button
Paper Holder
Power-supply
Connecto
r
Chassis
fixture hole
Serial Connector
USB Connector
○ Head open button
Printer head is opened by pushing the button when Paper Roll is set
○ Interface connector (USB & Serial)
Connect the interface cable for serial or USB.
○ DC connector
Connect the power supply cable (DC24V)
○ Installation mechanism
Using the attachment hole of a chassis, it attaches with equipment, a screw.
○ Paper holder
Paper Roll is hooked to the roll paper bar
Ⅱ- 2．How to attach a panel
Fixing screw（M3）
Attachment hole
Paper outlet
SK1-V21/31
８
SK1-V21
A
/31
A
Ⅲ．Dimensions
①SK1-V31
（Unit：ｍｍ）
９
SK1-V21
A
/31
A
②SK1-V21
（Unit：ｍｍ）
１０
SK1-V21
A
/31
A
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali SANEI ELECTRIC Stampante
