Satel INT-TSG Manuale utente
int-tsg_u_en 10/13
Keypad
INT-TSG
Brief User Manual
Firmware version 1.00
SATEL sp. z o.o. • ul. Schuberta 79 • 80-172 Gdańsk • POLAND
www.satel.eu
WARNINGS
Please read this manual carefully before use.
Changes, modifications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
The SATEL's goal is to continually upgrade the quality of its products, which may result in
alterations of their technical specifications and firmware. The current information on
the introduced modifications is available on our website.
Please visit us:
http://www.satel.eu
The declaration of conformity may be consulted at www.satel.eu/ce
The following symbol may be used in this manual:
- note.
We are pleased that you have chosen a product offered by us. We wish you satisfaction with
your choice and would like to assure you that we are always ready to provide professional
assistance and information on our products.
SATEL Ltd. is a manufacturer of a wide variety of dedicated devices for use in alarm
systems. Additional information can be found on our website www.satel.eu or at points of
sale offering our products.
1. Keypad description
1.1 LED indicators
LED Color Description of indications
yellow blinking – trouble or trouble memory (the LED goes off when the
partitions operated by the keypad are armed)
green ON – all partitions operated by the keypad are armed
blinking – some partitions operated by the keypad are armed or exit
delay countdown is running
green blinking – service mode is entered
red ON or blinking – alarm or alarm memory
Information about the armed state can be extinguished after a time period defined by
the installer.
If the installer has enabled the G
RADE
2 (INTEGRA) / G
RADE
3 (INTEGRA Plus)
option:
the LED will indicate alarms only after user authorization (entering the code);
blinking of the LED means that there is a trouble in the system, some zones are
bypassed, or that there was an alarm.
2 INT-TSG SATEL
1.2 Touch screen
The screen enables communication between the user and the alarm system. It displays
information about the system status, while allowing you to operate and program the alarm
system, as well as control the home automation equipment. Intuitive icon-based menu makes
the everyday use easier. Touching an icon will display the next screen or start the specified
function. The icon will bring you back to the previous screen. Touching the icon will
display the main screen.
The display backlight mode is programmed by the installer.
1.2.1 Status screen
The status screen is displayed when the keypad is idle. It will be displayed automatically after
60 seconds have elapsed since the last operation was performed on the screen, unless the
terminal is running (see p. 12). When the terminal is displayed, the status screen may appear
later or even not appear at all (e.g. when the service menu is open).
If the user is logged in, he/she will be automatically logged out a few seconds after the
status screen is displayed.
Information presented on the status screen
The keypad with factory settings presents the date and time on the status screen. The
installer can customize the information displayed to suit the user needs. Information on the
state of selected partitions, zones or outputs, temperature taken by selected temperature
detectors, date and time, as well as any text, can be presented on the status screen.
Icons illustrating the state of partitions are described in section “Partition status” (p. 8).
Icons illustrating the state of zones are described in section “Zone status” (p. 9).
SATEL INT-TSG 3
Icons illustrating the state of outputs are shown in the table below.
Icon Color Output status
grey deactivated
red activated
Additional messages, connected with occurrence of specific events (e.g. arming or disarming,
auto-arming delay countdown, entry / exit delay countdown, alarm, etc.), may also appear on
the status screen.
Functions available from the status screen
Touching the status screen will display the main screen.
The keypad can be configured by the installer so as to display the macro commands
assigned to a corresponding group on touching the corner of status screen. The illustration
below shows the screen parts, the touching of which can display macro commands (the digit
corresponds to the number of macro command group).
Touching any part of the status screen for 3 seconds may trigger the silent panic
alarm. Whether or not this function will be available is to be defined by the installer.
Slide show
Slide show can be displayed as a background of the status screen. The images to be
displayed should be stored on a microSD memory card, which will be inserted in the keypad
slot by the installer.
4 INT-TSG SATEL
1.2.2 Main screen
Presented on the main screen are:
date and time in the format defined by the installer (if some specific events occur, other
messages can be displayed, instead of the date and time, e.g. entry or exit delay
countdown, alarm messages, etc.);
name of the currently logged user;
icons enabling operation of the keypad and alarm system.
Icon Function
Informs you that no user is logged in.
User login.
Informs you that a user is logged in (name of the currently logged user is
displayed below).
User logout.
Displays the “Arming” screen (see pages 5and 13).
Enables disarming / alarm clearing (see pages 6, 15 and 16).
Enables control of the alarm system and home automation devices (see p. 7).
Displays the “System status” screen (see p. 8).
Displays the “Emergency” screen (see p. 10).
Displays the “Advanced” screen (see p. 11).
SATEL INT-TSG 5
1.2.3 Authorization screen
Some screens and functions may only be available after user authorization. The authorization
is code based. Use the number keys to enter the code and then confirm, touching the
icon.
By default, the following codes are preprogrammed in the control panel:
service code: 12345
object 1 master (administrator) code: 1111
When acting under duress, use the D
URESS
type code instead of the regular user
code.
1.2.4 “Arming” screen
6 INT-TSG SATEL
Icon Function
Enables arming in mode “full”.
Enables arming in mode “full + bypasses”.
Enables arming in mode “without interior”.
Enables arming in mode “without interior and without entry delay”.
1.2.5 “Alarm clearing / Disarming” screen
The “Alarm clearing / Disarming” screen will be displayed after you touch the icon on
the main screen, when there is an alarm (alarm memory) and at least one partition is armed.
Icon Function
Enables alarm clearing.
Enables disarming.
SATEL INT-TSG 7
1.2.6 “Control” screen
The “Control” screen will be displayed on touching the icon on the main screen, if
macro commands are assigned to at least two groups of macro commands. It presents the
groups of macro commands. Up to 4 groups can be programmed by the installer. Touching
a group icon will display macro commands assigned to that group. Up to 16 macro
commands can be assigned to one group.
If macro commands are assigned only to one group, touching the icon will display the
macro commands at once. In the keypad with factory settings, two macro commands are
programmed and assigned to the first group (the figure below shows the screen to be
displayed on a keypad with factory settings).
The control panel will execute the factory programmed macro commands, provided
that the alarm system is suitably configured by the installer.
You should consult the installer about which additional macro commands would
facilitate operation of the alarm system or control of the home automation devices
connected to the control panel. Only the installer can program any additional macro
commands.
Icon Function
Quick full arming (without user authorization by using a code) – in a similar way
as after pressing the 0 keys on the keypad with text menu.
Exit delay clearing – in a similar way as after pressing the 9 keys on
the keypad with text menu.
8 INT-TSG SATEL
The keypad can be configured by the installer so as to start the function of output control
from the terminal on touching the icon (touching the icon for about 3 seconds may be
required).
1.2.7 “System status” screen
Icon Function
Displays the “Partition status” screen.
Displays the “Zone status” screen.
Displays the “Troubles” screen, on which the current troubles are presented
(the installer can configure the control panel to display the troubles until
cleared).
Enables viewing the event log.
Displays the “Alarm log” screen, on which alarms stored in the control panel
memory are presented.
Displays the “Trouble log” screen, on which troubles stored in the control panel
memory are presented.
Partition status
The status of partitions is illustrated by means of icons. The number shown next to the icon
corresponds to the partition number. On touching the icon, the full partition name will be
presented at the display bottom.
Altri manuali per INT-TSG
5
Indice
Altri manuali Satel Tastiera
Satel
Satel INT-SCR Manuale utente
Satel
Satel CA-6 KLED-S Manuale utente
Satel
Satel INT-TSG2 Guida utente
Satel
Satel ABAX 2 Manuale utente
Satel
Satel CR-MF5 Manuale utente
Satel
Satel VERSA-KWRL2 Manuale utente
Satel
Satel INT-TSI Guida utente
Satel
Satel VERSA INT-TSH2 Manuale utente
Satel
Satel INTEGRA INT-TSH2 Manuale utente
Satel
Satel PERFECTA Manuale utente
Satel
Satel INT-TSG2 Manuale del proprietario
Satel
Satel INT-KLCDK-GR Manuale utente
Satel
Satel CR-MF5 Manuale utente
Satel
Satel INT-SCR-BL Manuale utente
Satel
Satel INT-TSI Manuale utente
Satel
Satel VERSA INT-TSH2 Guida utente
Satel
Satel PRF-LCD-WRL Manuale utente
Satel
Satel INT-KSG Manuale di istruzioni
Satel
Satel CA-6 KLED Manuale utente
Satel
Satel PRF-LCD Manuale utente
