Satel Integra INT-KSG2R Manuale utente

INT-KSG2R

Keypad with touch keys int-ksg2r_sii_en 02/23

Quick installation guide

Full manual is available on www.satel.pl.Scan the QR code to go to

our website and download the manual.

The device should be installed by qualified personnel.

Changes, modifications or repairs not authorized by the manufacturer shall void

your rights under the warranty.

Disconnect power before making any electrical connections.

The keypad is designed for indoor installation. The place of installation should be readily

accessible to the system users.

1. Open the keypad enclosure (Fig. 1). The enclosure opening tool, shown in the illustration,

is included in the keypad delivery set.

2 INT-KSG2R SATEL

2. Place the enclosure base against the wall and mark location of the mounting holes

(Fig. 2).

3. Drill the holes in the wall for wall plugs (anchors).

4. Pass the cables through the opening in the enclosure base (Fig. 2).

5. Use wall plugs (anchors) and screws to secure the enclosure base to the wall. Proper wall

plugs must be selected for the type of mounting surface (different for concrete or brick

wall, different for plaster wall, etc.).

6. Connect the DTA, CLK and COM keypad terminals to the appropriate terminals of the

control panel communication bus (Fig. 3). To make the connection, use an unshielded

non-twisted cable. If you use the twisted-pair type of cable, remember that CLK (clock)

and DTA (data) signals must not be sent through one twisted-pair cable. The wires must

be run in one cable. The length of wires must not exceed 300 m.

7. If you wish to connect any detectors to the Z1 and Z2 zones, connect the wires to the

terminals. Connect the detectors in the same way as to the control panel onboard zones

(use the keypad COM terminal).

8. Connect the supply wires to the +12V and COM terminals. The keypad can be powered

directly from the control panel or from an additional power supply unit.

9. Place the front panel onto the catches, snap close the enclosure.

10.Turn on the power supply, set the address and identify the keypad (see the full installer

manual).

SATEL INT-KSG2R 3

Description of terminals

+12V - power supply input.

COM - common ground.

DTA - data.

CLK - clock.

RSA, RSB - RS-485 bus.

OC1, OC2 - terminals provided for future applications.

Z1, Z2 - zones.

Hereby, SATEL sp. z o.o. declares that the radio equipment type INT-KSG2R is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity

is available at the following internet address: www.satel.pl/ce

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. +48 58 320 94 00

www.satel.pl

Altri manuali per Integra INT-KSG2R

1

Indice

Altri manuali Satel Tastiera

Manuali Tastiera popolari di altre marche

BFT

BFT SELETTO Manuale utente

Micro Id

Micro Id MP7G3BL Manuale di istruzioni

WindowMaster

WindowMaster WLI 130 Manuale utente

ACT

ACT ACT PRO 1030 Manuale utente

Cardin

Cardin SSB Series Manuale utente

Harman Kardon

Harman Kardon KP 1 Manuale utente

Chamberlain

Chamberlain KPR2000 Guida utente

CYP

CYP CR-KP1 Manuale utente

Aeware

Aeware k-35 Series Guida di riferimento

Aritech

Aritech CS-175 Series Manuale utente

GE

GE NetworX NX-1600E Series Manuale utente

Lenze AC Tech

Lenze AC Tech MC SERIES Manuale utente

Burg Wächter

Burg Wächter secuENTRY 7711 Manuale utente

Aeware

Aeware in.k450 Manuale utente

Lenze

Lenze EPM-H410 Manuale utente

Toshiba

Toshiba RKP007Z Manuale utente

Gemini

Gemini GEM-DXK1 KEYPAD Manuale utente

Russound

Russound MDK-C5 Manuale operativo