Satel INT-TSG Manuale utente

®

INT-TSG

KEYPAD

int-tsg_sii_en 06/15

Quick installation guide

Full installation manual is available on www.satel.eu

The alarm system should be installed by qualified personnel.

Disconnect power before making any electrical connections.

The INT-TSG keypad is designed for indoor installation. The place of installation should be

readily accessible to the system users.

1. Open the keypad enclosure (Fig. 1). The enclosure opening tool, shown in the illustration,

is included in the keypad delivery set.

2. Place the enclosure base on the wall and mark the location of mounting holes. Be sure to

take into account the tamper element mounting hole.

3. Drill the holes for wall plugs (screw anchors).

4. Pass the cables through the opening in the enclosure base.

5. Using wall plugs (screw anchors) and screws, fasten the enclosure base to the wall.

6. Connect the DTM, CKM and COM keypad terminals to the appropriate terminals of the

control panel communication bus (Fig. 2). It is recommended that the unshielded non-

twisted cable be used for making the connection. If you use the twisted-pair type of cable,

remember that CKM (clock) and DTM (data) signals must not be sent through one

twisted-pair cable. The wires must be run in one cable. The length of cables must not

exceed 300 m.

2 SATEL

7. Connect the wires to the terminals of additional zones, if any detectors are to be

connected to them (the detectors are to be connected in the same way as to the control

panel onboard zones). The zones are supported when the keypad is connected to

INTEGRA / INTEGRA Plus control panel.

8. Connect the supply wires to the KPD and COM terminals. The keypad can be powered

directly from the control panel, from expander with power supply or from a power supply

unit.

9. Place the front panel onto the catches, snap close the enclosure.

Description of terminals

KPD - power supply input.

COM - common ground.

DTM - data.

CKM - clock.

A RS485 B - unused terminals.

Z1, Z2 - zones.

The declaration of conformity may be consulted at www.satel.eu/ce

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. 58 320 94 00

www.satel.eu

Altri manuali per INT-TSG

5

Indice

Altri manuali Satel Tastiera

Satel

Satel INT-SCR Manuale utente

Satel

Satel INT-TSG2 Manuale del proprietario

Satel

Satel Integra INT-KSG2R Manuale utente

Satel

Satel INT-SF Manuale utente

Satel

Satel CR-MF5 Manuale utente

Satel

Satel INT-KSG Guida utente

Satel

Satel VERSA-KWRL2 Manuale utente

Satel

Satel CA-64 S Manuale utente

Satel

Satel INT-TSG2 Guida utente

Satel

Satel INT-TSI Guida utente

Satel

Satel VERSA-LCDM-WRL Manuale utente

Satel

Satel CA-6 KLED Manuale utente

Satel

Satel INT-SK Manuale utente

Satel

Satel INT-SF Manuale utente

Satel

Satel INT-KLCDK-GR Manuale utente

Satel

Satel CA-6 KLED Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Satel

Satel INT-KWRL Manuale utente

Satel

Satel INTEGRA INT-TSH2 Manuale utente

Satel

Satel INT-TSG Guida utente

Satel

Satel INT-TSG Guida utente

Satel

Satel INT-TSG2 Manuale utente

Satel

Satel CR-MF5 Manuale utente

Satel

Satel VERSA INT-TSH2 Manuale utente

Manuali Tastiera popolari di altre marche

BFT

BFT SELETTO Manuale utente

Micro Id

Micro Id MP7G3BL Manuale di istruzioni

WindowMaster

WindowMaster WLI 130 Manuale utente

ACT

ACT ACT PRO 1030 Manuale utente

Cardin

Cardin SSB Series Manuale utente

Harman Kardon

Harman Kardon KP 1 Manuale utente

Chamberlain

Chamberlain KPR2000 Guida utente

CYP

CYP CR-KP1 Manuale utente

Aeware

Aeware k-35 Series Guida di riferimento

Aritech

Aritech CS-175 Series Manuale utente

GE

GE NetworX NX-1600E Series Manuale utente

Lenze AC Tech

Lenze AC Tech MC SERIES Manuale utente

Burg Wächter

Burg Wächter secuENTRY 7711 Manuale utente

Aeware

Aeware in.k450 Manuale utente

Lenze

Lenze EPM-H410 Manuale utente

Toshiba

Toshiba RKP007Z Manuale utente

Gemini

Gemini GEM-DXK1 KEYPAD Manuale utente

Russound

Russound MDK-C5 Manuale operativo