Satel SX6-TO Manuale utente

SX6-TO

OPTICAL ANTI FOAM DETECTOR sx6-to_en 10/14

The SX6-TO anti foam detector detects an attempt of damping the siren with acoustical

signaling with PUR foam. The detector is dedicated to be mounted in Satel's SD-6000

outdoor siren.

Note: The SX6-TO detector can only be installed in the SD-6000 sirens manufactured after

1 August 2014.

1. Electronics board

Fig. 1. Electronics board of SX6-TO detector.

transmitter and receiver diodes.

LED (red). The LED is ON when there is no communication between the transmitter and

receiver diodes. It goes on about 2 seconds after the infrared beam is broken, and goes

off immediately after the obstacle is removed.

relay.

terminals:

TMP - tamper output (relay output).

COM - common ground.

12V - power input.

2. Installation

Disconnect power before making any electrical connections.

1. Insert the SX6-TO board into its holders in the enclosure base of the siren.

2. Connect power cables to the 12V and COM terminals.

3. Connect the TMP terminals in series with the tamper switch of the siren.

2 SX6-TO SATEL

Fig. 2. Installation of the SX6-TO detector in SD-6000 siren enclosure.

3. Specifications

Supply voltage ...................................................................................................12 V DC ±15%

Standby current consumption ..........................................................................................35 mA

Maximum current consumption........................................................................................45 mA

TMP output rating ...........................................................................................40 mA / 16 V DC

Environmental class according to EN50130-5 ........................................................................III

Operating temperature range.............................................................................-25°C …+55°C

Maximum humidity..........................................................................................................93±3%

Dimensions ...............................................................................................................97x53 mm

Weight.................................................................................................................................12 g

The declaration of conformity may be consulted at www.satel.eu/ce

SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND

tel. + 48 58 320 94 00

[email protected] • www.satel.eu

Indice

Altri manuali Satel Sensore di sicurezza

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente

Solinst

Solinst 301 Manuale utente