SATO ARGOX AS-9400BT Manuale utente

AS-9400BT

Cordless 2D Scanner

User Guide

http://www.argox.com

service@argox.com

V1.0-23-08-2017

Version: 1.0

AS-9400BT

User Guide

Regulatory Compliance

FEDERAL COMMUNICATIONS

COMMISSION INTERFERENCE

STATEMENT

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment

and receiver.

-Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

-Consult the dealer or an experienced radio/ TV

technician for help.

AS-9400BT

User Guide

CAUTION:

Any changes or modifications not expressly

approved by the grantee of this device could

void the user's authority to operate the

equipment.

RF exposure warning

The equipment complies with FCC RF exposure

limits set forth for an uncontrolled environment.

The equipment must not be co-located or operating in

conjunction with any other antenna or transmitter.

AS-9400BT Scanner/Cradle

Frequency: 2402MHz~2480MHz

RF Power:

Barcode Scanner –2.02dBm (EIRP) / Base -

1.21dBm (EIRP)

Hereby, Argox Information Co., Ltd. declares that

the radio equipment type AS-9400BT is in

compliance with the standard ETSI EN 301489-1.

經型式認證合格之低功率射頻電機，非經許

可，公司、商號或使用者均不得擅自變更頻

率、加大功率或變更原設計之特性及功能。

低功率射頻電機之使用不得影響飛航安全及

干擾合法通信；經發現有干擾現象時，應立

即停用，並改善至無干擾時方得繼續使用。

AS-9400BT

User Guide

iii

前項合法通信，指依電信法規定作業之

無線電通信。低功率射頻電機須忍受合

法通信或工業、科學及醫療用電波輻射

性電機設備之干擾。

RF EXPOSURE WARNING:

The equipment complies with FCC RF exposure

limits set forth for an uncontrolled environment.

The equipment must not be co-located or operating in

conjunction with any other antenna or transmitter.

警告：電池若未妥善處理，可能會導致爆炸。

請勿拆卸電池，或用火銷毀電池。請將電池放置於兒童拿不

到的地方。請使用專用充電器充電，並請依照當地政府或法

律規定妥善處理廢棄電池。

AS-9400BT

User Guide

CAUTION: EXPLOSION HAZARD

Do not disassemble, short circuit, heat the battery or dispose of in

fire. Store battery pack in a proper place. Do not expose to

temperature above 60℃/140℉. Use specified charger only.

Please dispose of the used batteries following the rules or laws

issued by the local government.

Note All brands and trademarks shall belong

to their respective owner.

Note Specification is subject to changes

without notice.

AS-9400BT 
User Guide 
v 
 
 
 
Contents 
1Introduction...........................................................1
1 Unpacking.......................................................2
2 Indicators.........................................................3
2.1 Status lights................................................... 3
2Get started .............................................................4
1 Charging and Installation ................................4
1.1 Charging Your Scanner ................................ 4
1.2 Set up your scanner ......................................5
1.3 How to scan ..................................................6
3Controls and settings.............................................7
1 Firmware Version .............................................. 7
2 Barcode Programming ....................................7
3 LED Indicator Light........................................7
4 Beep Indicator .................................................8
5 UDI Setting .....................................................8
6.1 Bluetooth Connection .................................... 8
7 Scanning Mode .............................................12 
7.1 *Trigger Mode (Default)..............................12 
7.2 Auto Sense Mode .........................................13 
7.3 Continuous Mode.........................................13 
8 Keyboard Language ......................................13 
9 Data Uploading Mode...................................17 
9.1 Normal Mode ...............................................17 
9.2 Store Mode ................................................... 17 
9.3 Output Stored Data.......................................18 
9.4 Output Total Entry........................................ 18 
9.5 Clear Memory .............................................. 18 
10 Get Battery Volume.....................................18 
11 Idle time ......................................................19 

AS-9400BT 
User Guide 
vi 
 
 
 
12 Convert Case...............................................20 
13 Terminator...................................................20 
14 IOS Keyboard POP UP/HIDE.....................21 
15 Beeper .........................................................22 
16 Restore factory default ................................22 
17 Transmit Code ID Character .......................23 
17.1 Symbol Code ID Identifiers.......................24 
17.2 AIM Code Identifiers .................................24 
18 All Symbologies..........................................24 
18.1 1D Symbologies.........................................25 
18.2 2D Symbologies.........................................25 
18.3 1D Inverse Barcode.................................... 26 
18.4 Decode UPC / EAN Supplementals 
UPC/EAN..................................................................26 
18.5 UPC-A........................................................27 
18.6 UPC-E ........................................................31 
8.7 EAN-8 .......................................................... 34 
18.6 UPC-E ........................................................37 
18.7 EAN-8 ........................................................41 
18.8 EAN-13 ......................................................44 
18.9 Bookland EAN (ISBN)..............................46 
18.10 Bookland ISBN........................................47 
18.11 Code 128...................................................47 
18.12 GS1-128 (UCC/EAN-128) ......................48 
18.13 ISBT 128 ..................................................49 
18.14 Code39......................................................50 
18.15 Code 32.....................................................54 
18.16 Code 93.....................................................55 
18.17 Code 11.....................................................58 
18.18 Interleaved 2 of 5/ITF ..............................61 

AS-9400BT 
User Guide 
vii 
 
 
 
3.18.20 Discrete 2 of 5/Industrial 2 of 5/IND25... 66 
3.18.21 Matrix 25..................................................69 
3.18.22 Standard 25/IATA 25................................ 72 
3.18.23 Codabar ....................................................76 
3.18.24 MSI........................................................... 80 
3.18.25 GS1 DataBar/RSS.................................... 83 
3.18.26 PDF417.....................................................85 
3.18.27 QR.............................................................87 
3.18.28 Data Matrix (DM)....................................89 
3.18.29 Maxi Code................................................ 91 
3.18.30 Aztec Code ............................................... 92 
3.18.31 Han Xin Code...........................................92 
3.18.32 Plessey......................................................94 
3.18.33 Brazil Bank Code.....................................95 
3.18.34 COMPOSITE........................................... 96 
3.18.35 EAN/UCC ................................................ 96 
4. Troubleshooting...................................................97 
4.1 Scanner issues ...............................................97 
4.2 Bar code issues..............................................98 
5. Specifications ......................................................99 
6. Pin Assignments............................................101 
Appendix ..........................................................102 
Numeric Bar Codes...........................................102 
Cancel Barcode .................................................103 
Hide Prefix or suffix digits................................104 
Output Format...................................................104 
Custom prefix and suffix...................................105 
Table 1. ASCII Character Equivalents ..............112 
 
 

AS-9400BT

User Guide

1Introduction

AS-9400BT is a cordless scanner that can read

bar codes on objects or on screens. The high

performance scanning engine delivers high

speed and high readability, making it an ideal

scanning solution for business.

￭High decoding performance Fast and

easy scan for 1D & 2D bar codes

￭High optical resolution Your scanner

reads high density bar codes up to 3mil for

1D (code 39) & 7.5mil for QR code.

￭Distortion processing Even if your bar

code is distorted, AS-9400BT still

recognizes it.

￭Mobile Phone Displays Readable

￭Support Interfaces of USB / USB COM /

RS-232

￭Using type C connector at cradle for

data transmission and battery

recharging

￭Bluetooth 5.0 Dual mode (BLE &

Classic BT+EDR)

￭Data rate of up to 3 Mbps

￭Auto-Sensing Support (Automatically

switch on cradle)

￭Windows, Android, iOS devices direct

link

￭Large memory for out of

communication range backup

AS-9400BT

User Guide

1.1 Unpacking

Make sure all of the following items are

included in your package.

✓Scanner x1

✓Cradle x1

✓USB cable x1

✓Y cable x1

✓Quick start guide x1

When you receive your scanner, open the

package immediately and inspect for shipping

damage. If you discover any damage, contact

the shipping company and file a claim. Argox

is not responsible for any damage incurred

during shipping. Save all package materials

for the shipping company to inspect.

Note If any item is missing, please

contact your local dealer.

Altri manuali per ARGOX AS-9400BT

Indice

Altri manuali SATO Lettore di codici a barre

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente