SATO PW208NX Manuale utente
1
Printer registration manual-Real-time Light for PW208NX
Before using SOS, SOS account is necessary.
Please contact nearest SATO local office or our contracted business partners.
Connect a printer to SOS
Push the power button on the control panel until the LED lights up in blue and turn on the printer.
An initial icon is displayed at the top of the printer screen, but it is not yet connected with SATO.
Please make the following settings to link the printer and use account.
*Important”
The printer firmware is old, SOS is not supported. And SOS icon is not displayed.
Firmware version 3.2.3-r2 or newer version is required.
1. Network setting.
Network requirement for SOS
In order to connect the printer to SOS using the network,
It is necessary to enable communication on the Internet with the following port numbers.
Port number:443/TCP *Outbound only
Connection method 1
Through a firewall (DNS setting required for printers)
Connection method 2
Through a proxy server (Proxy server setting described below is necessary)
2
About SOS Port diagnostic service
The diagnostic service is a tool that can easily diagnose the customer's network environment.
Please visit SOS web site to access Port diagnostic service
https://www.sato-sos.com/en
NOTE
Limitation about Real-time Light
Wireless LAN connection is required to connect the printer to SOS using the network as Real-time
Light. Since it is necessary to configure communication conditions according to your network
environment, please consult your network administrator for details.
2. How to set the wireless LAN interface
1) In order to connect the printer to the wireless LAN, Network setting is configured by using
SATO All-In-One Tool Application
All-in-One Tool Application download link
http://www.satoworldwide.com/software/all-in-one-tool.aspx
Wireless LAN configuration by All-In-One Tool Application.
http://www.manual.sato-global.com/printer/cl4nx_cl6nx/main/main_GUID-F0688981-C154-440A-B
BC0-CDBEF7FCEA0A.html?q=interface%2Bsetting
Manual is not for PW208NX. However configuration steps are the same.
3
2) Proxy server (if customer use proxy)
In order to set up proxy saver setting for printer, please access the printer through Web config page
to set. Please display the web config page and set up the proxy server as follows.
(1) Open the browser and enter the URL of this product.
If the IP address of the device is "192.168.143.123",
Please enter "https://192.168.143.123"
Web confg screen.
(2) If you are asked for a security certificate, you need to authenticate and click “Continue”.
The model name, print head resolution and MAC address are displayed in the upper
right of each page.
(3) Click “Login”to log in
Select “setting” and enter 0310 as password
(4) After login, select [Settings] →[Network] in the menu to display the setting menu.
4
(5) Set proxy saver
(6) In the setting menu, select →[Network] →[Settings] →[Wi-Fi] →[Proxy] and set the
proxy server information
3. Printer settings for SOS
Turn on the printer and go to “Online Service” to change SOS mode to Light
When you press and hold the button and button simultaneously for 2 seconds or
more in the offline (stop) screen,
Select [Communication setting] ⇒[Online service] ⇒[SOS mode] from the printer menu and set
the SOS mode to "Light".
5
4. Log in to SOS Smart app select [Add printer] →[Real-time Light]
Only for NFC-enabled devices/smartphones running the Android OS or NFC must be enabled
on the device/smartphone
Touch the NFC of the printer with the Real-time Light”displayed. NFC is installed in the red
circle part of the figure below.
6
When NFC reading is completed, the screen changes so enter the device name and installation
location with SOS Smart App and tap the Add button.
After completing the addition, long press the power button of the printer, turn off the power
to restart the printer.
Choose “Dashboard” on SOS Smart App to go to own dashboard to confirm.
Or log into own SOS account to see device list
Long press to turn off the printer
7
When the printer has been registered in your account, The SOS type of the device list displayed
“Real-time (Light)” Registration process is completed.
However the SOS type is still “On-demand”, The printer is not connected to SOS as Real-time Light
yet. So please check the followings
・Network setting, DNS saver and Proxy server.
Please refer to the SOS user manual from the following URL for WEB application.
https://www.sato-sos.com/en/support/sos_usermanual.pdf
Altri manuali per PW208NX
2
Indice
Altri manuali SATO Stampante
SATO
SATO M-8490Se Series Manuale utente
SATO
SATO WS208 Manuale utente
SATO
SATO MR-4206 Manuale utente
SATO
SATO CL408e Manuale utente
SATO
SATO M-84Pro Series Manuale utente
SATO
SATO CX400 Manuale del proprietario
SATO
SATO TH208 Manuale utente
SATO
SATO SG112 ex Manuale del proprietario
SATO
SATO CX400 Manuale utente
SATO
SATO CT 400 Manuale per l'uso e la cura
SATO
SATO MB 200i Manuale utente
SATO
SATO GT424 Manuale utente
SATO
SATO MB200 Manuale utente
SATO
SATO WS408DT Manuale utente
SATO
SATO LT408 Manuale utente
SATO
SATO LM412e Manuale utente
SATO
SATO e Series Manuale utente
SATO
SATO M-84Pro Series Manuale utente
SATO
SATO M-5900RV Manuale utente
SATO
SATO GT408 Manuale utente
