9
Min.20
Min.5
Min.5 Min.20
HEATER INSTALLATION
It is recommended that the heater be placed on the wall nearest to the door. The air circulation
created by the door should work together with the hot air generated by the heater. For safety
and convenience, follow the minimum safety distances as provided (See Fig 1.). Follow the cubic
volumes(Seepage11).Donotinstalltheheatertotheoororwallniche.Installonlyoneheater
in a sauna room.
Be sure to build a strong foundation for the mounting rack (e.g. cross struts in sauna paneling) or
reinforce the wall with a thick board to prevent the heater from collapsing. Attach the heater to the
wall with the aid of the mounting rack. Screws (6 pieces) are provided for fastening of the rack to
thewall.Toafxtheheatertotherack,lifttheheaterandtthenutsthatareplacedattheback
of the heater to the slots on both sides at the top of the rack. Lock at least one of the side screws
to prevent the heater from being accidentally moved.
Acertiedelectricianmustdotheinstallationoftheheatertoensuresafetyandreliability.Improper
electricalconnectionscancauseelectricshockorre.RefertotheelectricaldiagramSeepage10.
An electrical supply cable must be connected to the terminal block inside the control unit through
the cable channel. The cable must be HO7RN-F type or its equivalent. To connect the cable, the
control unit must be opened (See page 12). First, pull the temperature knob outward to uncover
the screws that hold the plastic cover. Second, remove the set of screws under the temperature
knobandatthebottom(bothsides)ofthecontrolunit.Detachthefrontplasticcoverandnally
insert the electrical supply cable into the cable channel by simply slipping it through the hole at the
bottom of the channel towards the opening at the other end (See page 12). Install the cables
tightly to the terminal block. Put back the front plastic cover, screws and temperature knob.
The heater gets very hot. To avoid the risk of accidental contact with the heater, it is recommended
that a heater guard be provided. Reserve enough space for operation of the timer and thermostat
knobs.
Kuva 2
Fig. 2
Ruuvi
Screw
Kehys
Frame
Löylynohjain
Reector
Make sure that the heat
reectorshieldisplaced
at the back part of the
heater frame.
Varmista että löylynohjain on asen-
nettu kiukaan kehyksen takaosaan.
Löylynohjaimen asennus
How to install the reector
HUOM!
Löylynohjain pitää asentaa palovaaran
vähentämiseksi.
NOTE!
Reector must be installed to prevent
riskofre.
