SC&T IP01 Manuale utente

Questo manuale è adatto per i seguenti modelli

1

Indice

Manuali Estensione popolari di altre marche

SY

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuale utente

1

IP CABLING TRANSMISSION – Passive

ITEM NO.: IP01K = (IP01 4 units + IP01H 1 unit)

IP01：IP Extender over Coax

IP01H：Ethernet Switch with 4 Port 10M + 1 Port 10/100M

IP01 is a low cost and easy, speedy solution to allow you use existing coax cable to send IP camera signal.

Used in pairs with your RG59 cable to exceed the IEEE 802.3 10BaseT specification. The working range

could up to 200 meters at 10Mbps speed.

IP01H 4 port Ethernet Switch is special design and built in 4 pieces IP01 (IP extender over coax) with BNC

interface to send and extender TCP/IP signal over coaxial cable. Used in set with IP01 at IP camera side

or any TCP/IP equipment, to send the IP signal up to 200 meters over your existing coax cable. 4 BNC

port based on 10Mbps transmission speed, 1 port RJ45 to your NVR/computer based on 10/100M.

IP01K：4 x IP01 IP extender + 1 x IP01H 4 Port Ethernet Switch Kit Package

Package include：4 pieces x IP01, 1pcs x IP01H with power adapter.

Installation View:

Caution: IP01H unit with BNC male terminator at channel 2, 3, 4.

Do not remove the terminator if you do not use these channels. Otherwise,

it will cause this Switch not working.

Panel View:

IP01

Front Rear

IP01H

Front Rear

IP01

IP01H

IP01

IP01

IP01

2

Related model:

IP01：IP Extender over Coax

Send IP camera signal over existing coaxial cable.

Passive, no power required.

Exceeds 802.3 10BaseT specifications, isolating the receiver from the transmitted signal.

Transmission up to 200 meters (Max).

IP01H：Ethernet Switch with 4Port 10M + 1Port 10/100M

4 Port Ethernet Switch with 4 port BNC and 1 port RJ45.

RJ45 terminal support 10/100Mbps auto detect function

BNC terminal support 10Mbps, must work with IP01.

LED indication: Link/Active, Power.

Complies with standard IEEE802.3 and IEEE802.3u.

Auto MDI/MDI-X auto cross at RJ45 terminal.

Specification:

ITEM NO.

IP01

Network Input RJ45 x 1

Link Connector BNC x 1

Impedance 50Ω to dual 100Ω or 75Ω to dual 100Ω or 93Ω to dual 100Ω

Crosstalk > 30 dB

Cable Coax Cable (RG59)

Dimensions mm 64x25x20.7

Weight g 25

ITEM NO.

IP01H

Speed 10/100M

Connector BNC x 4, RJ45 x 1

Power Supply DC5V 1A

Power Consumption 500mA

Storage Temperature -30℃~70℃

Operation Temperature -10℃~45℃

Dimensions mm 125×122.2×30

Weight g 375

Material Metal Black

Rev. B