Scansonic P3000 Manuale utente
UK User Manual
DK Brugervejledning
DE Bedienungsanleitung
FR Guide d’instructions
IT Manuale di istruzioni
P3000
2
Contents
02 CONTENTS
03 INFORMATION
04 FRONT AND REAR PANEL OVERVIEW
06 CONNECTING YOUR RADIO
06 OPERATING YOUR RADIO – DAB
07 SELECTING A STATION – DAB
07 INFORMATION SERVICES – DAB
08 OPERATING YOUR RADIO – FM
08 DISPLAY MODES – FM
09 AUX MODE
09 MANUAL CLOCK SETTING
10 SETTING THE ALARM
10 EQ SETTING
11 RESETTING THE RADIO
12 SPECIFICATION
3
Information
Congratulations on your new radio.
Please take a moment to read this manual.
Safety Instructions.
Please store this instruction manual for future
reference.
• Place the unit on a solid surface.
• Do not expose Scansonic P3000 to high
humidity, direct sunlight, dirt, heavy vibration
or extreme temperatures.
• Do not open the cabinet. Only qualified
technicians are allowed to handle this
Scansonic radios internal parts.
• If service or repair is required, this must also
be done by qualified technicians.
• User a duster or a slightly damp, soft and
Non-fluffy rag to clean the cabinet. Do not
use corrosive or strong cleaning agents.
• Make sure no liquids or moisture penetrates
the radio during cleaning. Unplug the radio
before cleaning it.
Unplug the radio in following cases:
• Foreign objects or liquids have penetrated
the radio.
• The radio cannot be operated properly.
• The cabinet has been damaged.
• The mains plug or the mains cable is
defective.
• If the radio is not to be used for a longtime.
Disclaimer
Despite our best efforts we cannot guarantee that the technical data indicated are correct, complete and updated,
We, Scansonic, reserve the right to make technical changes without prior notice.
4
Front panel Rear panel
5
01 Display 16 x 2 Digit LCD display showing all information on the radio
02 MODE Press to select DAB radio, FM radio or AUX input
03 SCAN Press to SCAN radio channels
04 STANDBY Press to go to STANDBY mode. Press Longer to Shut down
radio
05 ROTARY Volume Control / SELECT / Tune+ Tune- / SNOOZE button
06 INFO / MENU INFO: Press to retrieve information from Radio Stations
MENU: Press 2 seconds Manual Tune / EQ / Alarm / Sleep /
Clock System Reset
07 ALARM Press to display Alarm 1 / Alarm 2
08 PRESET Press to preset radio stations 1-10
09 SPEAKER 3” Full range loudspeaker
10 ANTENNA The radio comes with a telescopic antenna. To Improve FM
reception, adjust the antenna for best reception
11 BATTERY This radio can also be played with batteries (AA size x 4)
12 HEADPHONE Connect a separate stereo headset to this input to listen to the
radio. Connecting headset will disable the main speaker
13 AUX IN Connect a stereo or mono audio source (iPod, iPhone, iPad, MP3
Player, TV etc). Use 3.5mm jack enclosed to connect to devices
14 DC5V IN Use this input to the enclosed DC Power Supply
6
Connecting your radio
01 Your radio is supplied with a Mains Adaptor
02 Place your radio on a flat surface
03 Insert the adaptor plug into the DC socket on the back of your radio
04 Plug the adaptor into the 230 volts mains socket outlet
Connecting your radio - DAB
01 Carefully extend the telescopic antenna
02 Press the STANDBY button to switch on radio, the display will show “SCANSONIC”
and the radio will come into DAB mode automatically
03 First time the radio is used a QUICK SCAN will be carried out, if the radio has
been and turned back ON from STANDBY mode, the last used station will be
selected
04 For a full SCAN please press “SCAN” button for 2 seconds
05 When scanning is completed the display shall indicate the number of found
stations
06 You may PRESET your favorite stations by pressing PRESENT button and scroll to
the position you would like to save and then press SELECT button for 2 seconds
07 If no Stations are found after scanning the display will show “NO STATIONS
AVAILABLE” and it is necessary to relocate the radio to a position with better
reception
7
Selecting a station - DAB
01 The display show the name of the station selected
02 Press down ROTARY KNOB to select TUNE – or TUNE + button to scroll the
station list and find the station
03 Press down ROTARY KNOB to select the desired station
Information services - DAB
Your radio shall display different info which can be selected by pressing the INFO
button
01 Date shows the current date and time
02 Ensemble displays the name of broadcaster of the DAB Station
03 Genre displays the type of the selected station: Pop, Rock, News,
Jazz Etc.
04 Data Speed display the digital bit rate and mono / stereo of selected station
05 Station
Frequency
displays the frequency of the selected station
06 Radio text
(DLS)
displays text messages from the station
8
Operating your radio - FM
01 Carefully extend the telescopic antenna
02 Press STANDBY to power on the radio (Use MODE to select to FM)
03 Press SCAN button to automatically scan upwards
04 Press SCAN button 2 seconds to automatically scan downwards
05 You may PRESET your favorite stations by pressing PRESENT button and
scroll to the position you would like to save and then press SELECT button for
2 seconds
Display modes - FM
Your radio shall display below information by pressing the INFO button
01 Date shows the current date and time
02 Station Name shows the name of the station or the frequency of the station
03 Audio displays Mono or Stereo
04 Program displays the name of Program
If not available “Prog Type N/A” shall be displayed
05 Radio text displays text messages from the station
9
AUX mode
CONNECT TO YOUR IPOD, IPHONE, IPAD & OTHER AUDIO SOURCES
The radio has an auxiliary input. This input can be used to connect an external source
such as iPod, iPhone, iPad, MP3 Players and other audio sources by using the
included 3.5mm mini jack cable.
To connect please connect the 3.5mm mini jack cable to your radio and to your other
device.
Press MODE button to select the AUX mode.
Manual clock settings
The radio clock can be set manually as below. (Navigate by using Rotary)
01 Press MENU 2 Sec > Clock Setting > Auto Update or Manual Update
02 With Rotary please select Date Setting: DD : MM : YYYY
03 With Rotary please select Time Setting: HH : MM
10
Setting the alarm
The radio alarm allows you to wake up to your desired radio station or a buzz.
01 Press ALARM button 2 Sec
02 With Rotary Select Alarm number: 1 or 2
03 With Rotary Select Alarm mode: Off / Beep / DAB / FM
04 With Rotary Select Alarm option: Once / Daily / Weekday / Weekend
05 With Rotary Select Alarm Time: 00 : 00
06 With Rotary Adjust the Alarm Level 1-20
07 When Alarm is active and to turn off press MODE or STANDBY
08 When Alarm is active press down on Rotary to enter SNOOZE
Press Alarm button once to delete SNOOZE
EQ setting
The radio has an EQ function that allows your radio to play with different Equalizer
settings. (Navigate by using Rotary)
01 Press MENU 2 Sec > EQ Setting
02 With Rotary please select: Flat, News, Classic, Pop or Rock
03 Press SELECT to end
Indice
Lingue:
Altri manuali Scansonic Radio
Scansonic
Scansonic SKY Manuale utente
Scansonic
Scansonic DA800 Manuale utente
Scansonic
Scansonic P4000 Manuale utente
Scansonic
Scansonic DA300 Manuale utente
Scansonic
Scansonic R3 Manuale utente
Scansonic
Scansonic R110 Manuale utente
Scansonic
Scansonic R3 Manuale utente
Scansonic
Scansonic R2 Manuale utente
Scansonic
Scansonic D100 Manuale utente
Scansonic
Scansonic DA500 Manuale utente
Scansonic
Scansonic DA18 Manuale utente
Scansonic
Scansonic R3 Manuale utente
Scansonic
Scansonic I101 BT Manuale utente
Scansonic
Scansonic R4 Manuale utente
Scansonic
Scansonic IN210 Manuale utente
Scansonic
Scansonic DAB200 Manuale utente
Scansonic
Scansonic D100 BT Manuale utente
Scansonic
Scansonic P3000 BT Manuale utente
Scansonic
Scansonic D100 Manuale utente
Scansonic
Scansonic P2500 Manuale utente
