Scansonic R110 Manuale utente
R110
UK User Manual
DE Bedienungsanleitung
DK Brugervejledning
FR Guide d’instructions
IT Manuale di istruzioni
ES Manual del Usuario
SBruksanvisning
R110
1
Contents
1 Contents
2 Important safety instructions
3 Owner’s manual
4 Remote control
5 Front panel
5 Rear panel
6 Connecting the R110
7 Getting started/setup
8 Network
9 Internet radio
10 FM radio
11 DAB radio
12 External source
12 Sub out
13 Other settings
14 Internet radio portal
15 Music Player Mode
16 Alarm and Sleep
R110
2
Important safety instructions
CAUTION, read this rst
READ, FOLLOW, HEED, AND KEEP ALL INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE
DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS.
FOR PROPER OPERATION, THIS UNIT REQUIRES MINIMUM 4” (100mm) OF WELL VENTILATED SPACE
AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET.
DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT
ELECTRICAL CODES AND COMPATIBLE WITH VOLTAGE,POWER, AND FREQUENCY REQUIREMENTS
STATED ON THE REAR PANEL OF THE APPARATUS.
PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF
TIME.
ONLY USE ATTACHMENTS AND ACCESSORIES SPECIFIED BY THE MANUFACTURER FOR SAFE
OPERATION AND TO AVOID INJURY.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE.
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the product
R110
3
Owner’s manual
Introduction
Thank you for choosing R110. We hope our product
will bring you many years of enjoyment.
Please read this manual fully before unpacking and
installing the product.
Carton contents
During production and packing we have carefully
checked and inspected this receiver.
After unpacking please check for any damage from
transport. We recommend that you keep the original
carton box and packing material for any future
shipping.
In the carton box you will nd:
1 Remote control
1 FM/DAB antenna
1 Wi-Fi antenna
1 Mains cable
R110 installation
The receiver requires connection to the mains power
supply, so for your safety it is important that you read
this manual carefully.
First switch off all equipment when connecting your
R110.
R110 positioning
Place the amplier on a solid and plane surface. Avoid
placement on carpets and other soft surfaces.
Secure that there is plenty of ventilation around the
amplier, minimum 4” (100mm) free space behind and
above the amplier.
Do not cover the ventilation holes on the backside of
the amplier.
Care and cleaning
We don’t recommend use of any solvents or cleaners
on R110 lacquered cabinets. The cabinet surface
usually only requires dusting or cleaning with a soft
cloth (do not use water).
Disconnect the unit from the mains supply if taken out
of use for a longer period.
Environmental information
The R110 complies with international directives on
the Restriction of Hazardous Substances (RoHS) in
electrical and electronic equipment and the disposal
of Waste Electrical and Electronic Equipment (WEEE)
- the crossed bin symbol indicates compliance and
that the products must be appropriately recycled or
processed in accordance with these directives.
CAUTION, read this rst
READ, FOLLOW, HEED, AND KEEP ALL
INSTRUCTIONS AND WARNINGS.
DO NOT OPERATE NEAR ANY HEAT SOURCE
DO NOT BLOCK ANY VENTILATION OPENINGS ON
THIS APPARATUS.
DO NOT USE THIS APPARATUS NEAR
SPLASHING, FALLING, SPRAYING, OR STANDING
LIQUIDS.
CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND
DO NOT USE CLEANING AGENTS.
ONLY CONNECT POWER CORD TO A POLARIZED,
SAFETY GROUNDED OUTLET WIRED TO
CURRENT ELECTRICAL CODES AND COMPATIBLE
WITH VOLTAGE, POWER, AND FREQUENCY
REQUIREMENTS STATED ON THE REAR PANEL
OF THE APPARATUS.
PROTECT THE POWER CORD FROM DAMAGE
DUE TO BEING WALKED ON, PINCHED, OR
STRAINED.
UNPLUG THE APPARATUS DURING LIGHTNING
STORMS OR WHEN UNUSED FOR LONG
PERIODS OF TIME.
ONLY USE ATTACHMENTS AND ACCESSORIES
SPECIFIED BY THE MANUFACTURER FORSAFE
OPERATION AND TO AVOID INJURY.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK OR FIRE.
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
SERVICE MUST BE PERFORMED BY QUALIFIED
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufcient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the product
R110
4
Remote control
SLEEP ALARM
STANDBY
PRESET
NAVIGATION
INFO
MUTE
VOLUME +/-
MODE/INPUT SELECT
TREBLE +/-
BALANCE RIGHT
BALANCE RESET
NUM KEYBOARD
MENU
NAVIGATION
BACK
TUNE
BASS +/-
BALANCE LEFT
R110
5
Front panel
Rear panel
Standby Mode Back Up Down Select
- Volume +
Coaxial optical SubOut
Right Speakers Left
On
Off
Ethernet Wi-Fi Antenna Line in
5
1 2 3 4
6 7 8 9 10
R110
6
Coaxial optical SubOut
Ethernet Wi-Fi Antenna
6 7
Right Speakers Left
On
Off
4
9 10
Connecting the R110
First switch off all equipment when connecting your R110.
Set the On/Off switch (4) to Off.
Connect the power cable to the connector on the back (10) and then to
the mains voltage.
Connecting the loudspeakers.
Always switch the power off when connecting loudspeakers.
Connect the loudspeaker cables to the binding pots on the output
terminals (9), accepts wire up to Ø 4mm.
Make sure that positive terminal binding posts (marked + and coloured
red) are connected to the positive output terminal binding posts
on the loudspeaker and that the negative terminals (marked – and
coloured black) are connected to the negative output terminal on the
loudspeakers.
Mount the Wi-Fi antenna (short) onto the Wi-Fi terminal (6).
Mount the FM/DAB antenna (long) onto the antenna terminal (7).
R110
7
Getting started/setup
Setup wizard
When Scansonic R110 is started for the rst time, it runs through a
setup wizard to congure settings for date/time and network.
Note: If you want to use wired network, you can bypass the wizard.
Select YES to start the setup wizard.
Note: If power is removed while the wizard is in progress, the wizard will run again next time the
unit is started.
12/24 hour display
To change between 12 and 24 hour display.
Time/Date
The time and date can be updated manually or automatically. With
auto-update, the time and date are automatically synchronize with
external clocks.
Auto-update
DAB uses time signals from DAB stations.
FM uses time signals from FM radio broadcasts.
Network uses time signal from Frontier Silicon Internet radio portal.
1. Select Update from DAB, FM, Network or No update.
2. Set your timezone
3. If your country uses daylight saving,
Manual set
If you set No update, the wizard now prompts you to set time and
date manually.
The date and time are displayed as dd-mm-yyyy and hh:mm AM/
PM with the active value ashing.
Adjust each value with the Select.
R110
8
Network
Network wizard
Select Region.
Use Up/Down or navigation buttons on the remote control to
highlight desired wireless network from the list or wired, if you want
to use wired ethernet (RJ45 cable), press Select to enter selection.
Enter the network key (password).
Use Up/Down or navigation buttons on the remote control to select
the characters.
Press Select to enter the highlighted character.
Highlight OK and press Select to save password.
The unit will not try to connect to the network.
If connecting fails, it will return to the previous screen.
The network is now connected.
Press Select to exit wizard.
The unit remembers the last four networks it has connected to, and automatically tries to connect
to whichever it can nd.
For users experienced with networks settings, there are also other options for viewing and
manually altering network settings from Menu > System > Settings > Network.
R110
9
Internet radio
Network wizard
The unit can play thousands of radio stations and podcasts from around the world though a
broadband internet connection.
When you select internet radio mode, the unit contacts the Frontier Silicon internet radio portal to
get a list of stations, organised into region, country and different categories.
To enter internet radio mode, press Mode until the display shows Internet Radio, or press IRADIO
on the remote control.
Use Up/Down or navigation buttons on the remote control to
highlight desired wireless network from the list or wired, if you want
to use wired ethernet (RJ45 cable), press Select to enter selection.
Last listened
Use this option to select a recently used station.
Select MENU > Last listened.
Station list
Use this option to browse internet broadcasts.
Select MENU > Station list.
Select on of the following options:
My Favourites Favorites added via the Internet radio portal
Local Local stations
Stations Browse all stations
Podcasts Browse podcasts
My Added
Stations
Manually added stations via the Internet radio
portal.
When Stations is selected you can browse using these options:
Location Geographical location
Genre Rock, Pop, News etc.
Search Enter station name
Popular Popular stations
New Newly added stations
Genre
Once you have select a genre, the list can be display as follows:
All stations
Highlighted Stations
By country
Search
Enter the station name and select OK.
Altri manuali per R110
1
Indice
Lingue:
Altri manuali Scansonic Ricevitore
