SCC SC900 Manuale utente
User’s Manual
Portable Data Terminal
Model: SC900
SHIN CHUAN COMPUTER CO., LTD.
6F-2, 268, LianCheng Rd., ZhongHe Dist, New Taipei City 23553,
Taiwan(R.O.C)
TEL:886-2-82278801. FAX:886-2-82278832. http://www.sccltd.com.tw
NOV/07/2011 Ver:0.4
•Microsoft Windows CE is a registered trademark of Microsoft Corporation in the
United States and/or other countries.
•Wi-Fi is a registered trademark of the Wi-Fi Alliance.
•Bluetooth is a registered trademark of Bluetooth SIG, Inc.
•All other Trade Names referred to are the Servicemark, Trademark or Registered
Trademark of the respective manufacturers.
Information in this document is subject to change without notice. No part of this
document may be reproduced or transmitted in any form or by any means, electronic
or mechanical, for any purpose, without the express consent of SHIN CHUAN
COMPUTER CO., LTD. Copyright ©2011 by SHIN CHUAN COMPUTER CO., LTD.
All rights reserved
Revision History:
Date Description Remark
Table of Contents
Chapter 1. Introduction ..............................................................................1-1
1.1 About this Manual.................................................................1-1
1.2 User and Product Safety......................................................1-2
1.3 Battery Safety.......................................................................1-3
1.4 CE Statement.......................................................................1-4
1.5 FCC Statement.....................................................................1-8
1.5.1 Federal Communication Commission Interference
Statement.....................................................................1-8
1.6 Recycling & disposal instructions.........................................1-9
1.7 Regulatory information.........................................................1-9
1.8 Product Labeling................................................................1-10
1.9 System Specifications ........................................................1-12
1.10 Environment Standard......................................................1-13
1.11 Warranty and after service................................................1-13
Chapter 2. Getting Started .........................................................................2-1
2.1 Check the package...............................................................2-1
2.2 General View of the PDT......................................................2-2
2.2.1 SC900 general view.....................................................2-2
2.3 Charging the Battery Pack ...................................................2-4
2.3.1 Installing the battery pack ............................................2-4
2.3.2 Charging the battery pack with Micro USB cable.........2-5
2.4. Handling the Device............................................................2-6
2.4.1 Starting the Device.......................................................2-6
2.4.2 Power on / off...............................................................2-7
2.4.3 Calibration of the touch Screen....................................2-7
2.4.4 To mute the Sound for SC900......................................2-8
2.4.5 Using the Stylus...........................................................2-8
2.4.6 Using the SC900 Keypad.............................................2-8
2.5 Navigating the Display........................................................2-17
2.5.1 Setting Time and Date ...............................................2-17
2.5.2 Entering the Data.......................................................2-17
2.5.3 The Command Bar.....................................................2-18
2.5.4 The Task Bar..............................................................2-18
2.5.5 The Soft Keypad........................................................2-19
2.5.6 Setting Up Wireless LAN ...........................................2-19
2.5.7 Reading barcodes, 1D laser version..........................2-25
2.5.8 Installing the MicroSD Card .......................................2-26
2.5.9 Help ...........................................................................2-26
2.6 Power management...........................................................2-26
2.6.1 Suspend Mode...........................................................2-26
2.6.2 Resuming...................................................................2-27
2.7 Resetting the Device..........................................................2-28
2.7.1 Software (Warm) Reset..............................................2-28
2.7.2 Cold Reset.................................................................2-28
Chapter 3. Setting.......................................................................................3-1
3.1 Introduction ..........................................................................3-1
3.2 Control Panel .......................................................................3-1
3.2.1 BarCode Controls ........................................................3-1
3.2.2 Backup/Restore .........................................................3-18
3.2.3 Bluetooth Device Properties ......................................3-20
3.2.4 Certificates.................................................................3-24
3.2.5 Date/Time ..................................................................3-26
3.2.6 Device Information.....................................................3-27
3.2.7 Dialing Properties.......................................................3-27
3.2.8 Display Properties......................................................3-29
3.2.9 Input Panel.................................................................3-31
3.2.10 Internet Options .......................................................3-32
3.2.11 Keyboard..................................................................3-35
3.2.12 Network and Dial-up Connections............................3-35
3.2.13 Owner......................................................................3-40
3.2.14 Password.................................................................3-41
3.2.15 PC Connection.........................................................3-42
3.2.16 Power.......................................................................3-43
3.2.17 Regional Settings.....................................................3-45
3.2.18 Remove Programs...................................................3-47
3.2.19 Storage Manager .....................................................3-47
3.2.20 Stylus.......................................................................3-49
3.2.21 System.....................................................................3-50
3.2.22 USB Function Driver Properties...............................3-52
3.2.23 Volume & Sounds Properties...................................3-52
3.3 Tap Start.............................................................................3-53
3.3.1 Security......................................................................3-53
3.3.2 Bluetooth....................................................................3-54
3.3.3 Boot Manager ............................................................3-55
3.3.4 Brightness..................................................................3-56
3.3.5 Device Power.............................................................3-57
3.3.6 Fn Key Manager ........................................................3-58
3.4 Taskbar and Start Menu .....................................................3-59
Chapter 4. Communication ........................................................................4-1
4.1 Installing & Setting Up Microsoft ActiveSync........................4-1
4.1.1 Installing Microsoft ActiveSync on the Host PC............4-1
4.1.2 Connecting Device to Host PC ....................................4-1
4.2 Using ActiveSync .................................................................4-1
4.2.1 Setting up a Partnership ..............................................4-1
4.2.2 ActiveSync File Synchronization..................................4-2
4.3 Networking...........................................................................4-2
Chapter 5. Software Applications..............................................................5-1
5.1 Introduction ..........................................................................5-1
5.2 Software Applications...........................................................5-1
5.2.1 Internet Explorer ..........................................................5-1
5.2.2 Microsoft WordPad ......................................................5-4
5.2.3 Remote Desktop..........................................................5-9
5.2.4 Windows Explorer......................................................5-10
5.3 Flash Disk ..........................................................................5-12
5.3.1 Saving to Flash..........................................................5-12
5.3.2 FlashDisk Location.....................................................5-12
5.3.3 FlashDisk Size...........................................................5-13
1-1 / 121
Chapter 1.Introduction
Congratulations on purchasing the SC900 Portable Data Terminal, a Microsoft
Windows® CE Rugged Device. Its special combination of features makes it
perfect for using in a wide range of applications. These features as:
Intel® XScaleTM PXA310 624 MHz 32 bits RISC Processor
Windows® CE 6.0 Operating System
128MB SDRAM & 256MB Flash ROM
Open Architecture: User Accessible MicroSD Slot
240 x 320, 2.8” Color TFT Display with Touch Panel
One Numeric-Alpha Keyboards with LED backlight
WLAN 802.11a/b/g Radio Support
Bluetooth V2.0+EDR, Class II Support
WAN Module, MC75i(Optional)
Integrated 1D Barcode Scanner or 2D Imager Scanner
1.1 About this Manual
The following chapters contained in this manual are:
Chapter 1 Introduction General information about the Device.
Chapter 2 Getting started Describe the basic use of the Device.
Chapter 3 Setting Provide basic instructions for customizing
the Device.
Chapter 4 Communication Describe how to use all kinds of
communication of the Device.
Chapter 5 Software Application Describe the installed applications on the
Device.
1-2 / 121
1.2 User and Product Safety
zDo not stare into the laser or LED beam directly or shine it into eyes.
zNever use strong pressure onto the screen or subject it to severe impact,
as the LCD panel could become cracked and possibility cause personal
injury. If the LCD panel is broken, never touch the liquid inside because
the liquid irritates the skin.
zAlthough the Device has passed the test of IP65 standard for water and
dust resistance, avoid prolonged exposure to rain or other concentrated
moisture. Such condition exceeds the IP65 standard, and could result in
water or other contaminants entering into the Device.
zUse only the original approved AC Adapter with the Device. Use of an
unapproved AC Adapter could result in electrical problems, or even cause
a fire or electrical shock to the user.
zDo not disassemble the Device. Servicing should be done by supplier only.
If the Device or accessories gets damaged due to wrong handling or
unauthorized repair, warranty is void. In case the warranty seals are
broken, warranty is void too.
zMake regularly back-up of all important data.
zUnder no circumstance will supplier be liable for any direct, indirect,
consequential or incidental damages baring out of the use or inability to
use the hardware and software and/or any data loss, even if supplier has
been informed about the possibility of such damages.
zLASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER
PRODUCT
1-3 / 121
1.3 Battery Safety
CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type.
Dispose of Used Batteries According to the Instructions.
Lithium-ion battery packs might get hot, explode, ignite and/or cause serious
injury if exploded by abusive using. Please follow the safety warnings listed as
below:
zDo not throw the battery pack in fire. Do not expose the battery to high
temperatures.
zDo not connect the positive battery pack with negative battery pack to
each other with any metal object (like wire).
zDo not carry or store battery pack together with metal objects.
zDo not pierce the battery pack with nails or drills, strike the battery pack
with a hammer, step on the battery pack or otherwise expose it to strong
impacts, shocks or excessive force.
zDo not solder onto the battery pack.
zDo not expose battery pack to liquid or allow the battery contacts to get
wet.
zDo not disassemble or modify the battery pack. The battery pack contains
safety and protection measures, which, if damaged, may cause the
battery pack to generate heat, explode or ignite.
zDo not discharge the battery pack using any device except for the
specified device. When it is used in devices other than the specified
devices, the battery pack can be damaged or its life expectancy reduced.
If the device causes any abnormal current to flow, it may cause the battery
pack to become hot, explode or ignite and cause serious injury.
zIn the event the battery pack leaks and the fluid gets into one’s eye, do not
rub the eye. Rinse well with water and immediately seek medical care. If
left untreated, the battery fluid could cause damage to the eye.
1-4 / 121
1.4 CE Statement
This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the R&TTE
Directive 1999/5/EC:
- EN 60950-1: 2006 +A11:2009 +A1:2010
Safety of Information Technology Equipment
- EN 300 440-1 V1.6.1: 2010
- Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz
frequency range; Part 1: Technical characteristics and test methods
- EN 300 440-2 V1.4.1: 2010
- Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz
frequency range; Part 2: Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive
- EN 300 328 V1.7.1: 2006
- Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband Transmission systems; Data transmission equipment operating
in the 2,4 GHz ISM band and using spread spectrum modulation
techniques; Harmonized EN covering essential requirements under article
3.2 of the R&TTE Directive
- EN 301 893 V1.5.1 (2008-12)
- Broadband Radio Access Networks (BRAN); 5 GHz high performance
RLAN; Harmonized EN covering the essential requirements of article 3.2 of
the R&TTE Directive
- EN 301 511 V9.0.2: 2003
- Global System for Mobile communications (GSM); Harmonized standard
for mobile stations in the GSM 900 and DCS 1800 bands covering essential
requirements under article 3.2 of the R&TTE directive (1999/5/EC)
1-5 / 121
- EN 301 489-1 V1.8.1 (2008-04)
- Electromagnetic compatibility and Radio Spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common technical requirements
- EN 301 489-17 V2.1.1 (2009-05)
- Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17:
Specific conditions for Broadband Data Transmission Systems
- EN 301 489-7 V1.3.1 (2005-11)
- Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 7: Specific conditions for mobile and portable radio and
ancillary equipment of digital cellular radio telecommunications systems
(GSM and DCS)
- EN 62209-2: 2010
- Human exposure to radio frequency fields from handheld and
bodymounted wireless communication devices — Human models,
instrumentation, and procedures Part 2: Procedure to determine the
specific absorption rate (SAR) for wireless communication devices used in
close proximity to the human body (frequency range of 30 MHz to 6 GHz)
- EN 62311: 2008
- Assessment of electronic and electrical equipment related to human
exposure restrictions for electromagnetic fields (0 Hz – 300 GHz)
This device is a 2.4 GHz wideband transmission system (transceiver),
intended for use in all EU member states and EFTAcountries, except in France
and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum
authorities in order to obtain authorization to use the device for setting up
outdoor radio links and/or for supplying public access to telecommunications
and/or network services.
This device may not be used for setting up outdoor radio links in France and in
Indice
