Schlage M420 Manuale utente

M400 Series

Electromagnetic Locks

Installation Instructions for Single Locks

M420, M450, M490

FEATURES

Automatic Voltage Selection (AVS)

Magnet immediately detects 12VDC or 24VDC when power

is connected.

Anti-Tamper Switch (ATS)

An indication is provided should the magnet cover become

unsecured from lock.

Magnetic Bond Sensor (MBS)

Detects proper bond between magnet and armature. It can

be monitored remotely and locally with an LED.

LED

Provides local indication of MBS status.

Door Position Switch (DPS)

Indicates whether door is open or closed. this feature is used

in conjunction with the MBS.

Relock Time Delay (RTD)

Relock time can be changed. Range is 1 - 30 seconds.

MODELS

M420 (Trafﬁc Control)

UL1034 and 10C/500lb and 3hr rating

M450 (High Security)

UL1034 and 10C/1000lb and 3hr rating

M490 (Max Security)

UL1034 and 10C/1500lb and 3hr rating

TRIMS

Basic

Auto Voltage Selection (AVS) for 12 or 24VDC

Plus

Basic features + Door Position Switch (DPS), Magnetic Bond

Sensor (MBS), Relocking Time Delay (RTD), LED Status

Indicator (LED) and Anti-Tamper Switch (ATS)

UL Requirements:

• Units shall not impair operation of panic hardware mounted on door.

• Units shall not impair intended operation of an emergency exit.

• Units/Models are intended to be connected to UL Listed Equipment, not

intended for Burglar or Fire Alarm Initiating or Indicating Devices.

• Ambient Conditions - “For Indoor Use Only”

This device complies with part 15 of FCC rules.

Operation is subject to following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including any

interference that may cause undesired operation. Changes or modiﬁcations

not expressly approved by party responsible for compliance could void

user’s authority to operate equipment.

ELECTRICAL SPECIFICATIONS

Model

Amps (12VDC)

Per Lock

Amps (24VDC)

Per Lock

Holding Force

(lbs) Per Coil

M420 0.750 0.380 500

M450 0.750 0.380 1000

M490 0.650 0.350 1500

LOCK INSTALLATION

1 PREPARE FOR INSTALLATION

1a Determine Proper Magnet Orientation

• Magnet should be placed opposite of door hinges.

Magnet

Wiring Cover

LHR Door - Shown from Exterior

Magnet Wiring Cover

RHR Door - Shown from Exterior

1b Reorient Magnet (if necessary)

• Remove screws, wiring cover and end blocks.

End Block

Magnet

End Block

(with screw hole)

• Rotate magnet, end blocks and wiring cover as shown, then reassemble.

Magnet

Wiring Cover

End Block

(with screw hole)

1c Place Template and Mark Holes

• Place template on top corner, opposite of hinges.

• Mark holes and prepare them per template.

LHR

RHR

2 INSTALL MBS INDICATOR (OPTIONAL, PLUS MODELS ONLY)

2a Remove Cover

2b Drill Hole for MBS Indicator

Bottom

0.75"

(19mm)

¹⁄₄" (6 mm) drill bit

M420: 0.50" (13 mm)

M450/490: 0.75” (19mm)

0.25"

(6 mm)

hole

2c Install MBS Indicator

3 INSTALL ATS (OPTIONAL, PLUS MODELS ONLY)

3a Remove End Block and Wiring Cover

3b Install ATS and Reassemble

ATS

4 ATTACH ARMATURE TO DOOR

4a Install as Shown

Outside

5 INSTALL MOUNTING BRACKET INTO FRAME

5a Attach Mounting Bracket Temporarily

• Install two middle screws into slots and partially tighten.

Partially

tighten

Pull wires

OUTSIDE

Actual Size

Reinforced

Metal

Sheet

Metal

5b Remove Wiring Cover

5c Slide Magnet onto Bracket

OUTSIDE

5d Align Magnet to Armature

• Close door.

• Press magnet to fully engage with armature.

• Mark bracket location.

Press magnet to armature

INSIDE

Mark here

5e Fully Attach Bracket

• Remove magnet from bracket.

• Check bracket alignment with marks.

• Fully tighten two screws in slotted holes.

• Drill four (4) remaining holes.

• Fully tighten all screws.

Fully tighten

all screws

Drill four (4) holes

Use 10-24 tap if

metal reinforced

Check

alignment

OUTSIDE

Actual Size

Reinforced

Metal

Sheet

Metal

6 INSTALL LOCK

6a Install Magnet and Secure with Screws

Actual Size

7 CONNECT WIRING TO BOARD (STANDARD MODEL)

7a Review Wiring Connections

TB1

Printed Circuit Board

DC Power DC (+)

DC (-)

From Magnet

7b Connect Wires to Board

From Door Frame

DC Power Wires

From Magnet

7c Install Cover

Printed in China

44487296 Rev. 04/11-c

8 CONNECT WIRING TO BOARD (PLUS MODEL)

8a Review Wiring Connections

TB1

TB2

TB3

DC Power

DC (+)

DC (-)

MBS: 1A, 30VDC, Resistive

Contacts shown

in de-energized state

DPS: 0.25A, 30VDC, Resistive

Contacts shown

in open-door state

From Magnet

Printed Circuit Board

From LED

From MBS

RTD Adjuster

RED

Polarized

Black/Red

Note: Two MBS

plugs are

interchangeable

Min.

Time

Max.

Time

8b Connect Wires to Board

From Magnet

From Door Frame

Multi Wire Cable

From LED

From MBS (2)

From MBS (1)

8c Connect ATS Wires

ATS

NC (violet)

NO (gray)

C (white)

Switch Rating:

1A @ 30VDC, Resistive

8d Install Cover

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Schlage Serratura della porta

Schlage

Schlage CM5100-KPI Manuale utente

Schlage

Schlage KING COBRA-2 KC5196-2-R Istruzioni operative

Schlage

Schlage BE469 Manuale utente

Schlage

Schlage BE468 series Manuale utente

Schlage

Schlage L9000 Series Manuale utente

Schlage

Schlage CO-Series Manuale utente

Schlage

Schlage Connect BE469ZP Manuale utente

Schlage

Schlage Encode SMART WIFI LEVER Manuale utente

Schlage

Schlage A Series Manuale utente

Schlage

Schlage V10 Manuale utente

Schlage

Schlage XE360-M Series Manuale utente

Schlage

Schlage DCT-A00XP14-00 Manuale utente

Schlage

Schlage L9000 Series Manuale utente

Schlage

Schlage FC60 Manuale utente

Schlage

Schlage AD-Series Manuale utente

Schlage

Schlage 04-032 Foglio di istruzioni

Schlage

Schlage BE365 Manuale utente

Schlage

Schlage LE Manuale utente

Schlage

Schlage Touch FE695 Lever Manuale utente

Schlage

Schlage AD-300 Manuale utente

Schlage

Schlage D-Series Manuale utente

Schlage

Schlage KING COBRA KC9116 Manuale utente

Schlage

Schlage D170 Manuale utente

Schlage

Schlage AD-200 Manuale utente

Manuali Serratura della porta popolari di altre marche

Assa Abloy

Assa Abloy effeff 827A-IP Manuale utente

We.lock

We.lock SECBNEBL51 Manuale utente

Iseo

Iseo MA1A Manuale utente

ID Lock

ID Lock 150 Manuale utente

Lockly

Lockly ACCESS TOUCH PRO Manuale utente

iLoq

iLoq G50S Manuale utente

SDC

SDC Z7835 Manuale utente

ilco

ilco 452 Manuale utente

Samsung

Samsung shs-h705 Manuale utente

TRU-BOLT

TRU-BOLT 08102017 Manuale utente

CDVI

CDVI 500-LADJ Manuale utente

Igloohome

Igloohome Deadbolt 2S Metal Grey Istruzioni di installazione e manutenzione

eSSL

eSSL FL-300 Manuale utente

JAKO

JAKO JKBTNX4 Manuale utente

Dorma

Dorma MUNDUS PREMIUM GK 50 Guida utente

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manuale utente

Yale

Yale MORTISE 8800 SERIES Manuale utente

Siegenia

Siegenia KFV AS3500 Manuale utente