Schlage B250PD Manuale utente

*P513-174*

P513-174

B-Series Single Cylinder

Lock

Parts Included

• (2) Keys

• (1) Cylinder

• (1) M\zn”(11 mm) ring &

hardened steel insert

• (1) Z\,”(3 mm) ring &

hardened steel insert

• (1) Driver bar

• (1) Latch

• (2) Mounting screws,

cylinders

• (1) Strike

• (1) Strike dust box

• (1) Strike reinforcer

• (2) 3” (76 mm) mounting

screws, reinforcer

• (4) Mounting screws, latch

and strike

• (1) Thumbturn

Depending on size ordered, may include (2) Z\,”(3 mm) rings and

hardened steel inserts.

NOTE:

Hollow metal doors must be properly reinforced for latch

support. If door reinforcement is not furnished, contact door

manufacturer, or use Schlage reinforcer #37-001 (specify door

thickness)

1 Select rings and inserts.

Use chart to choose rings and inserts for door thickness

adjustment.

Door Thickness 5 Pin Cylinder 6 Pin Cylinder

1C\,”(35 mm) B and A B and (2) A

1C\v”(44 mm) BB and A

A B 5 Pin 6 Pin

Ring Insert Ring Insert 1C\zn”(30 mm) 1B\zn”(33 mm)

5 Pin 6 Pin

1C\,”(35 mm)

door

1C\v”(44 mm)

door

1C\,”(35 mm)

door

1C\v”(44 mm)

door

2 Prepare the door.

2a Mark centerline on door face and edge.

2b Place template on door and drill a 1Z\x”(38 mm)

hole through the door face (from both sides to avoid

damaging wood).

Drill a 1” (25 mm) hole in door edge. Drill C\,” (10 mm) deeper

as illustrated.

C\,”(10 mm) deeper

1” (25 mm) Hole

1Z\x”(38 mm) Hole

3 Install latch.

3a Rotate to adjust latch so that bolt faces door jamb.

3b Insert latch into hole. Line up and trace around

faceplate.

Use chisel to remove wood until the faceplate ts ush when latch

is fully inserted.

Installation InstructionsModel B250PD

Printed in U.S.A.

P513-174 Rev. 01/14-e

3c Install latch with provided screws.

4 Prepare door jamb.

4a Locate exact centerline of latch and mark centerline on

door jamb.

Mark drill points Z\v”(6 mm) above and below horizontal

centerline. Drill two (2) overlapping M\,”(22 mm) holes, ZZ\zn”

(17 mm) deep.

Clean out holes for strike box. Use strike as pattern for

cutout. Use chisel to remove wood Z\v”(6 mm) deep.

4b Mark and drill C\zn”(4 mm) pilot holes for 3” wood

screws.

Install reinforcer, dust box, and strike with provided screws.

5 Install cylinder.

5a Insert driver bar into cylinder.

5b With key removed, insert cylinder into rings (See Step

1) and guide driver bar into slot in latch.

Screw mounting screws from thumbturn through the inside

cylinder and tighten evenly.

Z\v”(6 mm) deep

M\,”(22 mm) Hole

ZZ\zn”(17 mm) deep

Z\v”(6 mm)

Customer Service

1-877-671-7011 www.allegion.com/us

Altri manuali Schlage Serratura

Schlage

Schlage BE365 Manuale utente

Schlage

Schlage J Series Manuale utente

Schlage

Schlage FA Series Manuale di servizio

Schlage

Schlage Control Series Manuale utente

Schlage

Schlage LINK FE599 Manuale utente

Schlage

Schlage BE467F Manuale utente

Schlage

Schlage CONNECT Istruzioni per il montaggio

Schlage

Schlage CO-100 Manuale utente

Schlage

Schlage FE51 Manuale utente

Schlage

Schlage M400 Series Manuale utente

Schlage

Schlage BE365 Manuale utente

Schlage

Schlage FE575 Manuale utente

Schlage

Schlage CO-100-CY-70-KP-RHO-626 Manuale utente

Schlage

Schlage GF3000 Gravity Force Series Manuale utente

Schlage

Schlage S-480 Manuale utente

Schlage

Schlage B664 Manuale utente

Schlage

Schlage SchlageTouch BE375 Manuale utente

Schlage

Schlage SENSE Manuale utente

Schlage

Schlage LT Series Manuale di servizio

Schlage

Schlage LINK FE599 Manuale utente

Schlage

Schlage AD-402 Manuale utente

Schlage

Schlage 672 Series Manuale utente

Schlage

Schlage BE489WB Manuale utente

Schlage

Schlage Ease S1 SMART DEADBOLT Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente