Scion-Tech SC08.MX600 Series Manuale utente

User Manual

Version 1.0

Configurable AV Matrix over IP

with Video Wall

SCION

Transmitter

SC08.MX600

User Manual

Scion Tech SC08.MX600

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

User Manual

Scion Tech SC08.MX600

Thank you for purchasing this product

For optimum performance and safety, please read these instructions carefully before connecting, operating or

adjusting this product. Please keep this manual for future reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric

shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and

extend the life of your equipment.

Table of Contents

1. Introduction…………………………………………………….…………………………….…….…………….……………………….

2. Features……………………………………………………………………………………………………….……….…………….……..

3. Package Contents…………………………………….……………………………………………………………….……….………..

4. Specifications…………………………………………………………………….………………………………………………….……

5. Transmitter Panel Description……………………………….….………….…………………………………………….……….

6. Receiver Panel Description…………………………………….…….…………….…………….…………………………………

7. Connecting the Transmitter……………………………………………….…………………….………………………….………

8. Connecting the Receiver……………………………………….….….…………….…………………….………….……………….

9. Preparing your PC.….……….……..….…………….….………….….….……….….….…….………….…………….….….………

9.1. Setting PC for DHCP.……………….…………………….……..……………………………………………………………….

9.2. Setting PC for Static IP Address..……..……..………….…………………………….…………..…….….……….………

10. Setting Device IP Addresses.….….….…………….….………..….….………………………………….………….…………..

10.1. Setting Transmitter IP Address..…..…….….…………………….….…………………………………………………..

10.2. Setting Receiver IP Address..…….………………………………….…………………….…..………..………………….

11. Application Drawing……………………………………………….….…….…….…………………….…………………………..

12. Maintenance………………………………………………………….….……….……………………………….…………………….

12.1. Servicing……………………………………………….…….…………………………………………….……….…….………..

12.2. Warranty……………………………………………………………….……………………….…….………….………………..

12.3. Returning a Product……………………………………..….…………………………….…….……………………………..

12.4. Warranty Limits and Exclusions……………………………………….………………….….….………………………

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 1

Software and Control

For software and control you need to download the SC08.CTL100 LAN Controller user manual.

User Manual

Scion Tech SC08.MX600

1. Introduction

The SC08.MX600 is an over IP solution for high definition signal extension over copper cables. This solution

leverages 1G Ethernet switches and enables signal management of 1080p/60Hz (4:4:4) signals with virtually zero

frame latency. Bi-Directional RS232, Infra-Red, and embedded audio are also supported.

The video wall mode allows a single video source to be stretched across multiple displays, each receiver crops and

scales the region of interest according to its position in the wall matrix. The receivers are locked to the source and

thus to each other with no frame rate conversion.

The SC08.MX600 is managed and controlled using RS232 and IP control codes over the network using an integrated

web browser or from virtually any third party controller, including those from AMX, Crestron, Control4.

2. Features

●Uses H.265 Encoding

●1080p/60Hz, 4:4:4

●Point-to-Point, Point-to-Multipoint & Multipoint-to-Multipoint

●Video Wall Functions

●Uses 1G Ethernet

●Matrix Routes - IR, RS232, USB

●PoE (Power over Ethernet)

●Control: RS232, TCP/IP, Web Interface

3. Package contents

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 2

Transmitter

1. 1 x Main Unit (SC08.MX600T)

2. 1 x IR Blaster Cable

3. 1 x IR Receiver Cable

4. 1 x 12V/1A Power Adaptor

5. 1 x User Manual

Receiver

1. 1 x Main Unit (SC08.MX600R)

2. 1 x IR Blaster Cable

3. 1 x IR Receiver Cable

4. 1 x 12V/1A Power Adaptor

5. 1 x User Manual

User Manual

Scion Tech SC08.MX600

4. Specifications

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 3

Technical

HDMI Standards HDMI 1.4, HDCP 1.4

Bandwidth 10.2Gbps

Video Resolutions 1080p/120Hz and 1080p/3D 60Hz

Colour Space RGB / YCbCr 4:4:4, YCbCr 4:2:2, YUV 4:2:0

Colour Depth 8-bit

HDMI Audio Formats LPCM 7.1CH, Dolby True HD™, Dolby Digital Plus™ and DTS HD Master Audio™.

Analogue Audio L/R Stereo Audio 20KHz, 0dB, 10K ohms

Infra-Red Wide Bandwidth 30KHz to 56KHz (940nm)

End to End Latency Less than 100ms

Transmission Distance 100m @ 1080p point-to-point or greater using 1G switches (LAN)

Transmitter Connections

Inputs

HDMI 1 x HDMI Type A, 19-Pin

Infra-Red 1 x 4-Pin Phoenix Terminal

Stereo Audio 1 x 3-Pin Phoenix Terminal

Ethernet 1 x RJ45 Data Socket

RS232 1 x 3-Pin Phoenix Terminal

USB 1 x USB Type B (Host)

Power 1 x 2.1mm Jack Socket

Outputs

HDMI (Looped) 1 x HDMI Type A, 19-Pin

Stereo Audio 1 x 3-Pin Jack Socket

Infra-Red 1 x 2-Pin Phoenix Terminal

Receiver Connections

Inputs

Ethernet 1 x RJ45 Data Socket

Infra-Red 1 x 4-Pin Phoenix Terminal

RS232 1 x 3-Pin Phoenix Terminal

Power 1 x 2.1mm Jack Socket

Outputs

HDMI 1 x HDMI Type A, 19-Pin

Infra-Red 1 x 2-Pin Phoenix Terminal

Stereo Audio 1 x 3-Pin Phoenix Terminal

USB 2 x USB Type A (Devices)

Power Transmitter Receiver

Type AC to DC Mains Adaptor AC to DC Mains Adaptor

Input 100 ~ 240V AC 50/60Hz 100 ~ 240V AC 50/60Hz

Output DC 12V DC 12V

Consumption 2.4 Watt 2 Watt

Environment Transmitter Receiver

Storage Temperature -20° to 60°C

Operating Temperature 0° to 40°C

Operating Humidity 20% to 90% RH (No Condensation)

Dimensions (W) 200 x (D) 100 x (H) 20mm (W) 200 x (D) 100 x (H) 20mm

Weight 470g 475g

ESD Human Body: +/-8Kv (air gap discharge), +/-4Kv (contact discharge)

Safety & Emissions CE, FCC, RoHS

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 4

User Manual

Scion Tech SC08.MX600

5. Transmitter Panel Description

Number Name Function

1 Power LED System power status LED. The red LED will illuminate when the transmitter is

powered.

2 Link LED Data transfer LED. The blue flashing LED indicates normal operation. Always on

indicates connection failure. Unit requires re-booting.

3 Reset Button Press and hold for 5 seconds to re-boot the unit.

4 DC 12V 12 volt 1 amp power input (unless using PoE switch).

5 Ethernet Connect to Ethernet switch using CAT5e/6/7 cable.

6 IR IN Connect IR receiver cable. The IR is routed with the HDMI signal to the receiver. Unit

operates on both +5V and +12V devices.

7 IR Out Connect the IR emitter and attach the other end to the source device.

8 RS232 Full duplex RS232 routed with HDMI signal.

9 USB USB routed with HDMI signal.

10 Audio In Embedded analogue stereo audio.

11 Audio Out De-Embedded analogue stereo audio from HDMI input.

12 HDMI In HDMI input from source device.

13 HDMI Out HDMI output looped from input

DC 12V Ethernet IR IN IR OUT RS232 USB Audio IN Audio Out HDMI IN HDMI OUT

S 5V 12V S TX RX L R L R

4 5 6 7 8 9 10 11 12 13

Power Link Reset

1 2 3

SCION

SC08.MX600T

Transmitter

Video over IP

Number Name Function

1 Power LED System power status LED. The red LED will illuminate when the transmitter is

powered.

2 Link LED Data transfer LED. The blue flashing LED indicates normal operation. Always on

indicates connection failure. Unit requires re-booting.

3 Reset Button Press and hold for 5 seconds to re-boot the unit.

4 DC 12V 12 volt 1 amp power input (unless using PoE switch).

5 Ethernet Connect to Ethernet switch using CAT5e/6/7 cable.

6 IR IN Connect IR receiver cable. The IR is routed with the HDMI signal to the receiver. Unit

operates on both +5V and +12V devices.

7 IR Out Connect the IR emitter and attach the other end to the display IR window.

8 RS232 Full duplex RS232 routed with HDMI signal.

9 USB USB routed with HDMI signal.

10 USB USB routed with HDMI signal.

11 Audio Out De-Embedded analogue stereo audio from HDMI or analogue input of transmitter.

12 HDMI Out HDMI output looped from input

User Manual

Scion Tech SC08.MX600

6. Receiver Panel Description

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 5

Power Link Reset

1 2 3

SCION

SC08.MX600R

Receiver

Video over IP

DC 12V Ethernet IR IN IR OUT RS232 USB Audio Out HDMI OUT

S 5V 12V S TX RX L R

4 5 6 7 8 9 10 11 12

USB

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 6

User Manual

Scion Tech SC08.MX600

7. Connecting the Transmitter

1. Place the transmitter on a non-heat emitting surface such as a shelf. Do not place the transmitter on a third

party product as this may cause overheating and damage the unit.

2. Ensure all cables are snag free and not laying across the transmitters housing as this may damage the cables.

3. Connect the HDMI cable to the HDMI IN and to your source device output.

4. Optional - Connect the HDMI cable to the HDMI OUT and the local sink device.

5. Optional - Connect the IR receiver cable to the IR IN and place the other end of the cable in line sight of the

display IR remote control.

6. Optional - Connect the IR emitter (blaster) cable to the IR OUT and position the emitter over the source

device IR window. Use a IR cover or blocker to prevent light bleeding to other devices.

7. Connect a CAT5e/6/7 patch cable to the LAN/Ethernet port and the 1G network switch.

8. Optional - Connect a host USB cable to the USB port and the PC.

9. Optional - Connect a 3-Pin Phoenix Terminal to the Audio IN and the audio source device. This audio is

software selectable on the receiver.

10. Optional - Connect a 3-Pin Phoenix Terminal to the Audio OUT and the sound distribution system. The audio

is software selectable between the HDMI input and the analogue Audio IN.

11. Connect the power supply unless you are using PoE network switches.

8. Connecting the Receiver

1. Place the receiver on a non-heat emitting surface such as a shelf or mount vertically behind the display. Do

not place the transmitter directly on the display as this may cause overheating and damage the unit.

2. Ensure all cables are snag free and not laying across the transmitters housing as this may damage the cables.

3. Connect the HDMI cable to the HDMI OUT and to your display input.

4. Optional - Connect the IR receiver cable to the IR IN and place the other end of the cable in line sight of the

source device IR remote control.

5. Optional - Connect the IR emitter (blaster) cable to the IR OUT and position the emitter over displays IR

window.

6. Connect a CAT5e/6/7 patch cable to the LAN/Ethernet port and the 1G network switch.

7. Optional - Connect a keyboard to the USB port.

8. Optional - Connect a mouse to the USB port.

9. Optional - Connect a 3-Pin Phoenix Terminal to the Audio OUT and the display or sound amplifier. The audio

is software selectable between the HDMI input and the analogue Audio IN of the transmitter.

10. Connect the power supply unless you are using PoE network switches.

Software and Control

For software and control you need to download the SC08.CTL100 LAN Controller user manual.

User Manual

Scion Tech SC08.MX600

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 7

9. Preparing your PC

a. If your network includes a router or DHCP server, IP addresses will be issued automatically and therefore

your PC settings should be set to “Obtain an IP address automatically”.

b. If no router or DHCP server is used, all the devices including the PC will need individual static IP

addresses.

9.1. Setting PC for DHCP

1. On your PC, go to Control Panel > Network and Internet > Network Connections > Local Area

Connections, right click on it and choose Properties.

2. In the “Local Area Connections Properties” dialogue box, double click Internet Protocol Version 4

(TCP/Ipv4).

3. In the “Internet Protocol Version 4(TCP/Ipv4) Properties” dialogue box, select “Obtain an IP address

automatically”.

4. Click “OK”.

5. Your PC is now ready to accept an IP address issued by the router or DHCP server.

Local Area Connection Properties

Networking

Connect using:

Cancel

Install…

Realtek PCIe GBE Family Controller

Configure…

This connection uses the following items:

Client for Microsoft Networks

QoS Packet Scheduler

Internet Protocol Version 6 (TCP/Ipv6)

Internet Protocol Version 4 (TCP/Ipv4)

Uninstall Properties

Description

Transmission Control Protocol/Internet Protocol. The default wide

area network protocol that provides communication across

diverse interconnected networks

Internet Protocol Version 4 (TCP/Ipv4) Properties

General

Cancel

Advanced…

You can get IP settings assigned automatically if your network

supports this capability. Otherwise, you need to ask your network

administrator for the appropriate IP settings.

Use the following IP address:

Obtain an IP address automatically:

IP address: 169 . 254 . 23 . 30

Subnet mask: 255 . 255 . 255.0

Default gateway: 169 . 254 . 23 . 30

Use the following DNS server addresses:

Obtain DNS server address automatically

Preferred DNS server: 169 . 254 . 23 . 30

Alternate DNS server: 255 . 255 . 255.0

Validate settings upon exit

9.2. Setting PC for Static IP Address

1. On your PC, go to Control Panel > Network and Internet > Network Connections > Local Area

Connections, right click on it and choose Properties.

2. In the “Local Area Connections Properties” dialogue box, double click Internet Protocol Version 4

(TCP/Ipv4).

3. In the “Internet Protocol Version 4(TCP/Ipv4) Properties” dialogue box, select “Use the following IP

address”.

4. Insert the IP address 169.254.23.30 and subnet mask 255.255.255.0

5. Click “OK”.

6. Your PC is now ready and can be connected to the transmitter or receiver.

Local Area Connection Properties

Networking

Connect using:

Cancel

Install…

Realtek PCIe GBE Family Controller

Configure…

This connection uses the following items:

Client for Microsoft Networks

QoS Packet Scheduler

Internet Protocol Version 6 (TCP/Ipv6)

Internet Protocol Version 4 (TCP/Ipv4)

Uninstall Properties

Description

Transmission Control Protocol/Internet Protocol. The default wide

area network protocol that provides communication across

diverse interconnected networks

User Manual

Scion Tech SC08.MX600

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 8

Internet Protocol Version 4 (TCP/Ipv4) Properties

General

Cancel

Advanced…

You can get IP settings assigned automatically if your network

supports this capability. Otherwise, you need to ask your network

administrator for the appropriate IP settings.

Use the following IP address:

Obtain an IP address automatically:

IP address: 169 . 254 . 23 . 30

Subnet mask: 255 . 255 . 255. 0

Default gateway: 169 . 254 . 23 . 30

Use the following DNS server addresses:

Obtain DNS server address automatically

Preferred DNS server: 169 . 254 . 23 . 30

Alternate DNS server: 255 . 255 . 255.0

Validate settings upon exit

User Manual

Scion Tech SC08.MX600

Tel: +44 (0) 1635 862484 www.scion-tech.co.uk [email protected]

Page 9

10. Setting Device IP Addresses

The IP address of your PC is now set to 169.254.23.30, therefore all other products on the LAN should be in the same

network segment. IP: 169.254.23.XX and Subnet: 255.255.255.0.

The default IP addresses for the transmitter and receiver is 169.254.23.10 and 169.254.23.11 respectively. When changing

the addresses we recommend using the following IP address range.

●Transmitter 1 = 169.254.23.51

●Transmitter 2 = 169.254.23.52

●Transmitter 3 = 169.254.23.53

●Continue with 54, 55 etc.

●Receiver 1 = 169.254.23.101

●Receiver 1 = 169.254.23.102

●Receiver 1 = 169.254.23.103

●Continue with 104, 104 etc.

Important: Do not use the IP addresses assigned to the PC (169.254.23.30) or the SC08.CTL100 controller (169.254.23.100)

as this will cause network problems.

10.1. Setting Transmitter IP Address

1. Connect the CAT5e/6 Ethernet cable to the transmitter “LAN” port and the PC or network switch. If the switch

has the facility to provide PoE the transmitter will power.

2. After initialising the blue LED will begin to flash.

3. Open your Web Browser and enter the transmitters default IP address (169.254.23.10).

4. In the Login dialogue box enter the user name “admin” and password “admin”.

169.254.23.10

169.254.23.10i

Username: admin

Password: admin

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Scion-Tech Ricevitore

Scion-Tech

Scion-Tech SC05.1100 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente