FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to cor-
rect the interference at his own expense.
Note: Good quality, shielded (braided shielded) cables must be used for the RS-232-C and Centronics interfaces.
Canadian EMI Compliance Statement
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans
le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
EMI-CISPR 22/EN 55 022/CE Marking
Warning: This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take ade-
quate measures.
5000 Series Printheads Replacement Instructions, 5120/5240/5122
©Copyright 2002.Scitex Digital Printing, Inc. All rights reserved.
3000 Research Blvd., Dayton, OH 45420-4099
This document contains proprietary information of Scitex Digital Printing, Inc. or its licensors and is their exclusive property. It may not be reproduced
without a written agreement from Scitex Digital Printing, Inc. No patent or other license is granted to this information.
The software described in this document is furnished under a license agreement. The software may not be used or copied except as provided in the license
agreement.
Scitex Digital Printing, Inc. makes no warranty of any kind with regard to the contents of this document, including, but not limited to, the implied warranties
of merchantability and fitness for a particular purpose. Scitex shall not be liable for any errors or for compensatory, incidental or consequential damages in
connection with the furnishing, performance, or use ofthis document or the examples contained herein. Information concerning products not manufactured by
Scitex Digital Printing, Inc. is provided without warranty or representation of any kind, and Scitex Digital Printing, Inc. will not be liable for any damages
resulting from the use of such information.
VersaMark and what’s next in print are trademarks of Scitex Digital Printing, Inc. Scitex and the Scitex logo are registered trademarks and service marks of
Scitex Corporation Ltd. Dijit is a registered trademark. FaxBack is a trademark of FaxBack, Inc. All other trademarks are property of their respectiveowners.
0113480 03/2002 Printed in U.S.A.
Part Number Revision Date Description ECN
0113480 001 12/2001 Revised for 5000 series, combined all three printheads SDP170
Previous Releases
Part Number Revision Date Description ECN
0113453 002 06/2001 5122 printhead PKG981
0113927 001 04/1998 Addendum for current 5240 PKG108
0113650 001 01/1997 5120 printhead 08975
0113705 000 03/1996 Early 5240 printhead 08278
