SCM Microsystems PAT1241 Manuale di installazione e funzionamento

SCM Microsystems (India)

OEM MANUAL

PACT (Contact/Contact-less)

Physical access control terminal

OEM Manual – PACT-STC II Page 1 of 10

SCM Microsystems (India)

Contents

1.0 Product Specification ................................................................................................................3

1.1 Overview...................................................................................................................................3

1.2 Product Features......................................................................................................................3

2.0 Hardware Specification .............................................................................................................4

2.1 Power Supply............................................................................................................................4

2.2 Clock Frequency.......................................................................................................................4

2.3 Contact interface details...........................................................................................................4

2.4 Contactless Reader..................................................................................................................4

2.5 User Interface...........................................................................................................................4

2.5.1 Keypad ..............................................................................................................................4

2.5.2 LEDs..................................................................................................................................4

2.5.3 Buzzer ...............................................................................................................................5

2.5.4 Installation .........................................................................................................................5

2.5.5 Cable Specifications..........................................................................................................7

3.0 Software Specifications.............................................................................................................8

3.1 Contact Card Parameters.........................................................................................................8

3.2 PICC Parameters......................................................................................................................8

3.3 DFU Utility.................................................................................................................................8

4.0 Regulatory Compliance.............................................................................................................9

4.1 Safety Regulations....................................................................................................................9

4.2 EMC Regulations......................................................................................................................9

OEM Manual – PACT-STC II Page 2 of 10

SCM Microsystems (India)

1.0 Product Specification

1.1 Overview

The term PACT is the acronym for Physical Access Control Terminal. The PAT1241 has three user

interfaces, the Contact, the contactless Smart Card and the Pin-pad and is intended for indoor use.

Apart from this there is the Access granted/denied indication LED and Buzzer. The PAT1241 is based

on the PACT STCII-B ASIC and is designed for indoor operation. The contact less interface is

managed by the Mifare controller. This product has two communication channels, the RS 485 channel

and Weigand/Magnetic stripe channel for communication with the Control Panel. For security

purposes, a SAM is embedded as a crypto processor and key storage device.

1.2 Product Features

User Interfaces

1. Contact Smart Card

2. Contact less Smart Card

3. Pin-pad

4. Activity LED’s one for contact, one for contact less and one for pin-pad

5. Access granted/denied indicator

6. Buzzer.

Power

The device is powered by the control panel, 12V DC with a range from 9 to 16V.

RS485 communication channel

1. Install options for 2 wire / 4 wire mode

2. DIP Switch configurable address selection and termination.

Wiegand interface

Magstripe Interface

OEM Manual – PACT-STC II Page 3 of 10

SCM Microsystems (India)

2.0 Hardware Specification

2.1 Power Supply

+12V DC is taken from the input to the control panel and regulated to +5V DC and +3.3V DC on the

PAT13X1 PCBs.

Connect the Shield pin of the reader to the base-plate and the shield of the cable to the base-plate.

Current Consumption is 110 -250 mA@12V for Device full operation.

2.2 Clock Frequency

•STC-II chip internally running @22.117 MHz for RS485 operation, derived from an external 12

MHz crystal

•ICC clock @4-12MHz

•Contactless reader's Transmitter antenna and receiver circuit works @13.56MHz using MIFARE

RC531 chip

2.3 Contact interface details

•ISO7816-1/3

•Protocol: T=0, T=1

•5V card (ISO7816 Class A and AB)

•Communication speed: up to 344,086 bps

•Frequency 4MHz as a minimum (up to 12MHz)

•Class A or AB cards ONLY; No support for B only cards.

2.4 Contactless Reader

•ISO14443 A and B (13.56MHz)

•ISO14443 part 1 thru 4

•Protocol: T=CL

•Communication speed: 106Kbps as a minimum (maximum 424Kpbs)

•Operating distance: min 2 cms for CAC card

2.5 User Interface

2.5.1 Keypad

•3 x 4: 0-9, Clear, Enter – standard telephone layout

•Audible feedback with different sounds for 0-9, Enter and Clear

•Use for PIN entry (Contactless)

2.5.2 LEDs

•1 Red – Access denied (can be managed thru Wiegand)

•1 Green – Access granted (can be managed thru Wiegand)

•1 LED per type of interface

o1 for Contactless

o1 for Contact

o1 for PIN

The application will manage these LEDs. SCM will only supply APIs to manage them (on, off,

blinking with frequency)

OEM Manual – PACT-STC II Page 4 of 10

SCM Microsystems (India)

2.5.3 Buzzer

•User feedback (beep) with different sounds.

2.5.4 Installation

Fix the base-plate on the wall and then mount the reader with a switch for tamper evidence in

between . Wires required for connection to the alarm needs to be connected to the switch, prior to

mounting the reader.

Connect the D0, D1, LED, BUZZER, RELAY lines from the reader to the control panel.

Shown below is the bottom portion of the reader.

OEM Manual – PACT-STC II Page 5 of 10

SCM Microsystems (India)

OEM Manual – PACT-STC II Page 6 of 10

SCM Microsystems (India)

2.5.5 Cable Specifications

Cable to be used between the Reader and the Control Panel should be 22 (7/30) AWG

OEM Manual – PACT-STC II Page 7 of 10

SCM Microsystems (India)

3.0 Software Specifications

3.1 Contact Card Parameters

Some important smart card parameters, supported smart card types, maximum operable smart card

frequencies, operating voltages etc., are detailed in the tables below.

ICC Parameters Value/Description

Class A Smart Cards Supported

Class AB Smart Cards Supported

ISO-7816 compliant Yes

Smart card operating frequency 4MHz

Maximum supported card baud-rate 344,086 bauds

3.2 PICC Parameters

Some important PICC parameters, supported contact-less card types, maximum operable PICC

frequencies, operating voltages etc., are detailed in the tables below.

ICC Parameters Value/Description

Type A T=CL PICC Supported

Type B T=CL PICC Supported

ISO-14443 compliant Yes

PICC operating frequency 13.56MHz

Maximum supported card baud-rate 424Kbps

3.3 DFU Utility

DFU utilities/drivers for dynamic Device Firmware Upgrade (DFU) are shipped with the device for

RS232 interface. DFU utilities/drivers are capable of performing a DFU under the following operating

systems.

Operating System Support

WIN98 Yes

WINME Yes

WIN2000 Yes

WINXP Yes

OEM Manual – PACT-STC II Page 8 of 10

SCM Microsystems (India)

4.0 Regulatory Compliance

This section describes the product's compliance with U.S. and international safety and

electromagnetic compatibility (EMC) regulations.

4.1 Safety Regulations

Below Table mention the safety regulations the product complies with when correctly installed in a

compatible host system.

Regulation Title

UL 60950 US Safety of Information Technology Equipment

EN 60950:2000 The Standard for Safety of Information Technology

Equipment including Electrical Business Equipment.

(European Union)

4.2 EMC Regulations

Regulation Title

FCC (Class B) Title 47 of the Code of Federal Regulations, Parts 2

and 15, Subpart C,Radio Frequency Devices. (USA)

5.2.1 FCC Compliance Statement (USA)

Product Type: Contact / contactless smart card reader.

Product Name: PACT-STC II

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 Sub part C of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment to a different electrical branch circuit from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by SCM could void the user’s

authority to operate the equipment.

5.3 Product Ecology Statements

OEM Manual – PACT-STC II Page 9 of 10

SCM Microsystems (India)

The following information is provided to address worldwide product ecology concerns and regulations.

5.3.1 Disposal Considerations

This product contains the following materials that may be regulated upon disposal: lead solder on the

printed wiring board assembly.

5.3.2 Recycling Considerations

SCM encourages its customers to recycle its products and their components (e.g., batteries, circuit

boards, plastic enclosures, etc.) whenever possible. In the U.S., a list of recyclers in your area can be

found at: http://www.eiae.org/

In the absence of a viable recycling option, products and their components must be disposed of in

accordance with all applicable local environmental regulations.

5.4 Product Certification Markings

Below Table lists the product certification markings.

Description Marking

UL file number for PACT-STC II

XXXXXXXXX

FCC ID for intentional radiator Class B

equipment. FCC ID MBP PAT 1300 - 1241

OEM Manual – PACT-STC II Page 10 of 10

Indice

Altri manuali SCM Microsystems Terminale touch

SCM Microsystems

SCM Microsystems SCL01X Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente