EZ Mode Installation
Page: #
AP Mode Installation
Page: 5
There are 2 ways to connect the ECSPHB to the ClickSmart+ App:
EZ Mode and AP Mode.
AP mode is for use if EZ Mode has failed.
AP Mode:
Step 1
Turn off the Hub before this operation, press and hold the “Connection” button, and then turn on
the device, until 1 beep is heard and the Blue LED is flashing.
Your Hub is now in AP Connection Mode.
Step 2
On the “ClickSmart+” App, press Add “+”, “ESP”, “Smart Alarm Hub with Backup Battery”.
Step 3
Choose “AP Mode”
Step 4
Enter the Wi-Fi password of the router which the Hub will be connected to.
Step 5
In the phones Wi-Fi settings, choose “SmartLife_xxxx” and connect. Once connected, return to the
“ClickSmart+” app
Step 6
Now you can set the alarm name to finalise the device.
