Screen Technics 1490800 Manuale utente

Continued Over.../

INSTRUCTIONS - SWING DOWN FLAT PANEL LIFT

Thank you for purchasing a Screen Technics Swing Down Flat Panel

Lift, please ensure that you read the following instructions fully before

attempting to install this product.

NOTE: THIS SWING UTILISES AN ADVANCED FALL ARRESTOR SYSTEM, THE SWING DOWN CAN ONLY BE OPERATED

IN A HORIZONTAL POSITION, IF THE SWING DOWN IS OPERATED ON ITS SIDE OR NOT IN A HORIZONTAL POSITION,

THE ANTI-FALL DEVICE WILL LOCK AND DISCONNECT POWER. IF THE ANTI-FALL DEVICE IS ACTIVATED, IT WILL

REQUIRE REPLACEMENT.

1. CONTROL

• Supplied with a Connect motor controller

• Infra-Red operation

• 2 x Dry Contact close inputs Up/Down

2. 4 CORE WIRING WAGO CONNECTOR

• Pin 1 – Brown Down

• Pin 2 – Black Up

• Pin 3 – Yellow / Green Earth

• Pin 4 – Blue Neutral

3. INSTALLATION EXAMPLES

• Bolted to timber in ceiling, attached to ceiling structure

1. Control.

a. Supplied with a Connect motor controller

b. Infra-Red operation

c. 2 x Dry Contact close inputs Up/Down

2. 4 Core Wiring Wago Connector

a. Pin 1 – Brown Down

b. Pin 2 – Black Up

c. Pin 3 – Yellow / Green Earth

d. Pin 4 – Blue Neutral

3. Installation Examples

a. Bolted to timber in ceiling, attached to ceiling structure

b. Attached to cable or chain to a

suitable structure within ceiling

space, using adjustable shackles

for levelling

1. Control.

a. Supplied with a Connect motor controller

b. Infra-Red operation

c. 2 x Dry Contact close inputs Up/Down

2. 4 Core Wiring Wago Connector

a. Pin 1 – Brown Down

b. Pin 2 – Black Up

c. Pin 3 – Yellow / Green Earth

d. Pin 4 – Blue Neutral

3. Installation Examples

a. Bolted to timber in ceiling, attached to ceiling structure

b. Attached to cable or chain to a

suitable structure within ceiling

space, using adjustable shackles

for levelling

1. Control.

a. Supplied with a Connect motor controller

b. Infra-Red operation

c. 2 x Dry Contact close inputs Up/Down

2. 4 Core Wiring Wago Connector

a. Pin 1 – Brown Down

b. Pin 2 – Black Up

c. Pin 3 – Yellow / Green Earth

d. Pin 4 – Blue Neutral

3. Installation Examples

a. Bolted to timber in ceiling, attached to ceiling structure

b. Attached to cable or chain to a

suitable structure within ceiling

space, using adjustable shackles

for levelling

1. Control.

a. Supplied with a Connect motor controller

b. Infra-Red operation

c. 2 x Dry Contact close inputs Up/Down

2. 4 Core Wiring Wago Connector

a. Pin 1 – Brown Down

b. Pin 2 – Black Up

c. Pin 3 – Yellow / Green Earth

d. Pin 4 – Blue Neutral

3. Installation Examples

a. Bolted to timber in ceiling, attached to ceiling structure

b. Attached to cable or chain to a

suitable structure within ceiling

space, using adjustable shackles

for levelling

c. Utilising 4 angle brackets, and mount using threaded rod

• Attached to cable or chain to a suitable structure within ceiling space, using adjustable

shackles for levelling

info@screentechnics.com.au

screentechnics.com.au

AUSTRALIA

22-24 Suttor Road, Moss Vale NSW 2577

+61 2 4869 2100

NEW ZEALAND

44 Mahana Road, Te Rapa, Hamilton

0800 022 821

ESTABLISHED IN 1990

STEP 4. FITTING DOOR TO SWING DOWN

• The swing down door is packaged separately

• The door bracket is pre-set at the factory at 90 degrees, as shown below

• This will allow the tting or removal of the door. Should the door require removal, the door

must not exceed 90 degrees

• After the door is hung using the hook system

• Fit the 6 side bolts with tube spacers to hold door in place

INSTRUCTIONS - SWING DOWN FLAT PANEL LIFT

c. Utilising 4 angle brackets, and mount using threaded rod

• Utilising 4 angle brackets, and mount using threaded rod

4. Fitting Door to swing down

a. The swing down door is packaged separately

b. The door bracket is pre-set at the factory at 90 degrees, as shown

below

c. This will allow the fitting or removal of the door. Should the door

require removal, the door must not exceed 90 degrees

d. After the door is hung using the hook system

e. Fit the 6 side bolts with tube spacers to hold door in place

Door hook system

with bolts and

spacers shown

Swing Down

Door

4. Fitting Door to swing down

a. The swing down door is packaged separately

b. The door bracket is pre-set at the factory at 90 degrees, as shown

below

c. This will allow the fitting or removal of the door. Should the door

require removal, the door must not exceed 90 degrees

d. After the door is hung using the hook system

e. Fit the 6 side bolts with tube spacers to hold door in place

Door hook system

with bolts and

spacers shown

Swing Down

Door

4. Fitting Door to swing down

a. The swing down door is packaged separately

b. The door bracket is pre-set at the factory at 90 degrees, as shown

below

c. This will allow the fitting or removal of the door. Should the door

require removal, the door must not exceed 90 degrees

d. After the door is hung using the hook system

e. Fit the 6 side bolts with tube spacers to hold door in place

Door hook system

with bolts and

spacers shown

Swing Down

Door

Door hook system with bolts

and spacers shown

Swing Down Door

5. Limit Setting

a. Limit are accessible from slot inside swing down

b. Limit towards the front adjusts top limit / closed - This limit should

not be adjusted as damage to the panel may occur

c. Limit towards the back adjusts the bottom limit / open

Should you have any questions regarding the installation of our products

please call our sales desk on +61 2 4869 2100 for assistance

Screen Technics Pty Ltd

Cnr Vale & Suttor Roads, Moss Vale, NSW 2577

Ph: +61 2 4869 2100

www.screentechnics.com.au

Thinking Lifters ….. Think Screen Technics

STEP 5. LIMIT SETTING

• Limit are accessible from slot inside swing down

• Limit towards the front adjusts top limit / closed - This limit should not be adjusted as damage

to the panel may occur

• Limit towards the back adjusts the bottom limit / open

ALWAYS ALLOW FOR PRODUCT REMOVAL IN ORDER TO BE SERVICED AND MAINTAINED.

Should you have any questions regarding the installation of our products please call our sales

desk on +61 2 4869 2100 for assistance

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Screen Technics Sistema di sollevamento

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente

Ricon

Ricon Mirage F9T Manuale utente