SeaLevel ACB-MP.LPCI Manuale utente

ACB-MP.LPCI

User Manual | 5102

Contents

CONTENTS...........................................................................................................................................................2

BEFORE YOU GET STARTED ...............................................................................................................................3

INTRODUCTION ...................................................................................................................................................4

INSTALLATION & CONFIGURATION...................................................................................................................6

PHYSICAL INSTALLATION.................................................................................................................................. 7

TECHNICAL DESCRIPTION .................................................................................................................................8

TECHNICAL SPECIFICATIONS..........................................................................................................................15

APPENDIX A –TROUBLESHOOTING................................................................................................................16

APPENDIX B –HOW TO GET ASSISTANCE .....................................................................................................17

APPENDIX C –ELECTRICAL INTERFACE ........................................................................................................18

APPENDIX D –SILK SCREEN –5102 PCB.......................................................................................................20

APPENDIX E –COMPLIANCE NOTICES...........................................................................................................21

WARRANTY ........................................................................................................................................................22

Before You Get Started

What’s Included

The ACB-MP+4.PCIe is shipped with the following items. If any of these items is missing or damaged

please contact Sealevel for replacement.

•ACB-MP+4.PCIe Adapter (Item# 5402e)

•100-Pin to (4) DB25M Breakout Cable, 36” in Length (Item# CA339)

Advisory Conventions

Warning

The highest level of importance used to stress a condition where damage could result to the

product, or the user could suffer serious injury.

Important

The middle level of importance used to highlight information that might not seem obvious or a

situation that could cause the product to fail.

Note

The lowest level of importance used to provide background information, additional tips, or other

non-critical facts that will not affect the use of the product.

Introduction

The ACB-MP.LPCI adapter provides the PC with a single channel multi-protocol synchronous serial

interface utilizing the Zilog Z85230 (ESCC™), which supports the HDLC/SDLC protocol using the Sealevel

SeaMAC V4 device driver. SeaMAC V4 also supports certain configurations of monosync, bisync, external

sync, and raw modes. The ACB-MP.LPCI adapter is an ideal solution for applications including DDS (digital

data service), military applications, banking communications, and other specialized applications.

The ACB-MP.LPCI also utilizes the Sipex-506 multi-protocol electrical interface chip that allows the ACB-

MP.LPCI to be compliant with EIA/TIA-530/530A, EIA/TIA-232E, EIA/TIA-485, and ITU V.35. Optional cables

are available to connect RS-449, RS-530, RS-530A, V.35 and X.21 interfaces.

The ACB-MP.LPCI meets the PCISIG size requirements for an MD1 low profile adapter. This allows the ACB-

MP.LPCI to be used in a variety of modern systems, including low profile servers, network appliances and

‘All in One’ desktop computers. A standard height bracket is available for implementations in a standard

height PCI slot. The ACB-MP.LPCI is a ‘Universal Bus’ adapter, allowing for use in either +5V or +3.3V PCI

slots and provides compliance with the PCISIG PCI Bus Specification Revision 2.2/2.3, which requires ATX

power support for both 5V and 3.3V.

Other Sealevel Sync Products

Low Profile PCI –1- Port

ACB-232.LPCI

(P/N: 5103)

Z85230 RS-232

ACB-Ultra.LPCI

(P/N: 5104)

Z16C32 RS-232/422/485/530/530a/V.35

PCI –1 –Port

ACB-232.LPCI

(P/N: 5103S)

Z85230 RS-232

ACB-Ultra.LPCI

(P/N: 5104S)

Z16C32 RS-232/422/485530/530a/V.35

PCI –4 –Port

ACB-MP+4.PCI

(P/N: 5402)

Z85230 RS-232/422/485/530/530/V.35

PC/104 –1- Port

ACB-104

(P/N: 3512)

Z85230 RS-232/422/485/530/530a/V.35

ACB-104.ULTRA

(P/N: 3514)

Z16C32 RS-232/422/485/530/530ª/V.35

PCMCIA –1 –Port

PC-ACB-MP

(P/N: 3612)

Z85233 RS-232/422/482/530/530z/V.35

Optional Items

Depending upon your application, you are likely to find one or more of the following items useful for

interfacing the ACB-MP.LPCI to real-world signals. All items can be purchased from our website

(http://www.sealevel.com) or by calling 864-843-4343.

DB25 Female to DB25 Male Extension Cable, 72 inch Length (Item# CA104)

The CA104 is a standard DB25F to DB25M serial extension

cable. Extend a DB25 cable or locate a piece of hardware where

it is needed with this six foot (72 inch) cable. The connectors

are pinned one-to-one, so the cable is compatible with any

device or cable with DB25 connectors. The cable is fully

shielded against interference and the connectors are molded to

provide strain relief. Dual metal thumbscrews secure the cable

connections and prevent accidental disconnection.

Recommended for applications with data rates less than 1M

bps.

DB25 Female (RS-530) to DB37 Male (RS-449 DTE) Cable, 10 inch Length (Item# CA107)

DB25 Female (RS-530) to DB37 Male (RS-449 DTE) Cable, 10

inch Length. RS-530 was designed to replace the bulky DB37

RS-449 connector. The CA107 cable allows any Sealevel RS-530

adapter to be used in an RS-449 application.

DB25 Female (RS-530) to DB15 Male (X.21) Cable, 72 inch Length (Item# CA159)

DB25 Female (RS-530) to DB15 Male (X.21) Cable, 72 inch

Length. Converts the Standard DB25 implementation of RS-530

or RS-422 to the ITU-T X.21 standard pinout.

DB25 Female to DB25 Male (RS-530) Twisted Pair Serial Cable, 72 inch Length (Item#

CA174)

DB25 Female to DB25 Male Twisted Pair Serial Cable, 72 inch

Length. Twisted Pairs provide increased data integrity in high-

speed serial applications. Recommended for RS-530

applications with data rates greater than 1M bps.

DB25 Female (V.35) to ITU-T ISO-2593 Style Connector (V.35) Cable, 72 inch Length

(Item# CA178)

DB25 Female (V.35) to ITU-T ISO-2593 Style Connector (V.35)

Cable, 72 inch Length. The CA178 converts the Sealevel DB25

implementation of V.35 to the ITU-T V.35 mechanical

standard.

Installation & Configuration

Software Installation

Windows Installation

Do not install the Adapter in the machine until the software has been fully installed.

Only users running Windows 7 or newer should utilize these instructions for accessing and

installing the appropriate driver via Sealevel’s website. If you are utilizing an operating system

prior to Windows 7, please contact Sealevel by calling 864.843.4343 or emailing

[email protected]om to receive access to the proper driver download and installation

instructions.

1. Begin by locating, selecting, and installing the correct software from the Sealevel software

driver database.

2. Type in or select the part number (#5102) for the adapter from the listing.

3. Select “Download Now” for SeaMAC for Windows.

4. The setup files will automatically detect the operating environment and install the proper

components. Follow the information presented on the screens that follow.

5. A screen may appear with text similar to: “The publisher cannot be determined due to the

problems below: Authenticode signature not found.” Please click the ‘Yes’ button and

proceed with the installation. This declaration simply means that the operating system is

not aware of the driver being loaded. It will not cause any harm to your system.

6. During setup, the user may specify installation directories and other preferred

configurations. This program also adds entries to the system registry that are necessary

for specifying the operating parameters for each driver. An uninstall option is also included

to remove all registry/INI file entries from the system.

7. The software is now installed, and you can proceed with the hardware installation.

For additional software support, please call Sealevel Systems’ Technical Support, (864) 843-4343. Our

technical support is free and available from 8:00 AM - 5:00 PM Eastern Time, Monday through Friday. For

email support contact: supp[email protected].

Physical Installation

The adapter can be installed in any PCI (5V or 3.3V) expansion slot.

Do not install the adapter until the software has been successfully installed.

1. Turn off power. Disconnect the power cord.

2. Remove the PC case cover.

3. Locate an available PCIe slot and remove the blank metal slot cover.

4. Gently insert the PCIe adapter into the slot. Make sure the adapter is seated properly.

5. Replace the screw (required for FCC Part 15 compliance).

6. Replace the cover.

7. Connect the power cord and power up the machine.

8. The ACB-MP.LPCI is now ready for use.

Technical Description

The ACB-MP.LPCI utilizes the Zilog 85230 Enhanced Serial Communications Controller (ESCC). This chip

features programmable baud rate, data format and interrupt control. Refer to the ESCC User Manual,

available from Zilog, for details on programming the Z85230 ESCC chip in the event you are writing your

own driver as opposed to using the SeaMAC driver.

Internal Baud Rate Generator

The baud rate of the ESCC is programmed under software control. The standard oscillator supplied with

the board is 7.3728 MHz. However, other oscillator values can be substituted to achieve different baud

rates.

Control and Status Registers Definition

The control and status registers occupy 16 consecutive I/O locations. The following tables provide a

functional description of the bit positions. This table is provided for users that desire to write their own

driver.

X = do not care.

Base

Mode

IRQST

DSRA

485CLK

ECHOA

SYNCA_RTS

SYNCA_CTS

AM3

AM2

AM1

AM0

485CLK

ECHOA

SYNCA_RTS

SYNCA_CTS

AM3

AM2

AM1

AM0

RLA

LLA

TSETSLA

RXCOPTA

RLA

LLA

TSETSLA

RXCOPTA

+14

SD7

SD6

SD5

SD4

SD3

SD2

SD1

SD0

+15

SD15

SD14

SD13

SD12

SD11

SD10

SD9

SD8

Field

Description

IRQST

SCC interrupt status:

1 = No interrupt pending on ESCC

0 = Interrupt pending on ESCC.

DSRA

DSRA:

1 = DSRA not active

0 = DSRA active

LLA

Local Loopback:

1 = LL set

0 = LL not set

RLA

Remote Loopback:

1 = RL set

0 = RL not set

TSETSLA

TSET clock source:

1= Received TXC as source

0 = TRXCA as source

RXCOPTA

RXCOPTA:

1= Selects SCC PCLK for RTXCA

0 = Selects received RXC for

RTXCA

SYNCA_RTS

SYNCA _RTS:

1 = SYNCA connected to RTS

0 = SYNCA is high

SYNCA_CTS

SYNCA_CTS:

1 = SYNCA connected to CTS

0 = SYNCA is high

485CLK

TSET switches with

TXD:

1 = clk switches

0 = no CLK switching

ECHOA

ECHO enable:

1 = echo disabled

0 = echo enabled

AM0 –AM3

I/O mode select. See table for valid interface options.

0 = High Impedance

SD0 –SD15

Optional security feature. Unique value per customer or

application.

Default value = FFFF

Interface Selection

The ACB-MP.LPCI supports a variety of electrical interfaces. Refer to the Control and Status Register

Definitions found in the Technical Description section of this manual for this bit description. There is line

termination on RXD, RXC, and TXC in the following modes: RS-530, RS-530A, RS-485T, and V.35.

HEX

Interface Mode

All signals are high impedance

* not supported *

RS-232

* not supported *

RS-485T with 120 termination

RS-485 without termination

6,7,8,9

* not supported *

single ended loopback

differential loopback

* not supported *

RS-530

V.35

RS-530A

DB-25M Pin Connector Pin Outs

RS-232 Signals

Base+5, M3-M0=2, 0010

Pin #

Signal

Name

Mode

Transmit Data

Output

Receive Data

Input

RTS

Request To Send

Output

CTS

Clear To Send *

Input

DSR

Data Set Ready

Input

GND

Ground

DCD

Data Carrier Detect

Input

TXC

Transmit Clock

Input

RXC

Receive Clock

Input

Local Loopback

Output

DTR

Data Terminal Ready

Output

Remote Loopback

Output

TSET

Transmit Signal Element Timing

Output

Test Mode

Input

In External Sync Mode, the external sync signal is fed into CTS.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SeaLevel Hardware per computer

SeaLevel

SeaLevel 7802e Manuale utente

SeaLevel

SeaLevel UltraCOMM+2.LPCIe Manuale utente

SeaLevel

SeaLevel ACB-II/EX Manuale utente

SeaLevel

SeaLevel ULTRA COMM+I.PCI 7103 Manuale utente

SeaLevel

SeaLevel DIO-16.PCI Manuale utente

SeaLevel

SeaLevel C4-104 Series Manuale utente

SeaLevel

SeaLevel Ultra-COMM+2/422.PCIe Manuale utente

SeaLevel

SeaLevel ISO-16.PCI Manuale utente

SeaLevel

SeaLevel SeaLINK+485-DB9 Manuale utente

SeaLevel

SeaLevel ULTRA 530.PCI Manuale utente

SeaLevel

SeaLevel PC-SIO 3600-485 Manuale utente

SeaLevel

SeaLevel ACB-232.LPCI Manuale utente

SeaLevel

SeaLevel ISO-COMM Manuale utente

SeaLevel

SeaLevel DIO-32B Manuale utente

SeaLevel

SeaLevel LATCH-16 Manuale utente

SeaLevel

SeaLevel SeaLINK+2/PC.SC Manuale utente

SeaLevel

SeaLevel SIO-485.LPCI Manuale utente

SeaLevel

SeaLevel C4-104.ULTRA Manuale utente

SeaLevel

SeaLevel SIO4-104.485 Manuale utente

SeaLevel

SeaLevel ULTRA COMM+2i.PCIe Manuale utente

SeaLevel

SeaLevel 7406e Manuale utente

SeaLevel

SeaLevel DIO-32.PCIe Manuale utente

SeaLevel

SeaLevel SeaLINK+8/232.RJ Manuale utente

SeaLevel

SeaLevel 3820 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente