INSTRUCTIONS FOR:
FOLDING WORKBENCH
Model No: FWB1
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
3Maintain the workbench in good condition. Replace or repair damaged parts. Use recommended parts only. Non authorised parts may
be dangerous and will invalidate the warranty.
3Keep the workbench clean for best and safest performance and check moving parts alignment regularly.
3Locate the workbench in an adequate working area for its function, keep area clean and tidy and ensure there is adequate lighting.
3Ensure the workpiece is correctly secured before operating the workbench.
3Ensure that any workpiece which extends beyond the bench centre of gravity is adequately supported.
3Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
7DO NOT use the workbench for any purpose other than for which it is designed.
7DO NOT get the workbench wet or use in wet weather conditions, and DO NOT expose the workbench to excessive heat.
7DO NOT operate the workbench if any parts are missing as this may cause failure or possible personal injury.
7DO NOT stand on the top of workbench, or use it as standing platform or to support a platform. The workbench is for clamping items only.
3When not in use store in a safe, dry, child proof area and ensure it will not tipple over.
2. ASSEMBLY
Unpack the product and check contents to ensure no parts are damaged. Should there be any damaged or missing parts contact your supplier
immediately. Follow the step by step illustrations to assembly your bench.
STEP 1
STEP 2
STEP 3
FWB1 - 0021 - 051198 issue 2
