Sealite SL60 Supplemento

Version 4.1

SL60

2-3nm+ Solar Marine Light

Installation & Service Manual

Large internal solar module

Charges the battery during

daylight hours

6 ultra-high intensity LEDs

With an operatinal life in

excess of 100,000 hours

LEDs result in enormous

savings in maintenance costs

Lens and base moulded

from UV-stabilised

LEXAN® polycarbonate

Provides excellent

impact-resistance

Bird deterrent spike

An environmentally-friendly spike

deters unwelcome bird life

LED lens and Sealite’s 360°

Omnidirectional LED Reector

(US Pat. No. 6,667,582. / AU Pat. No. 778,918)

Complex shaped lenses, coupled with

Sealite’s superior lens manufacturing

capabilities give superior

optical performance

Automatic night activation

The lantern will automatically begin

operation at dusk, once the ambient

light threshold drops sufciently

Internal user-replaceable battery in

sealed compartment (IP68 rating)

Allows the battery to be replaced after

years of service – don’t throw the light

away at the end of the

battery service life

SL60

2-3nm+ Solar Marine Light

Latest products and information available at www.sealite.com

SL60 2-3nm+ Solar Marine Light

Table of Contents

Introduction..........................................................................................Page 4

Operating Principle .............................................................................Page 4

Technology...........................................................................................Page 4

SL60 Model...........................................................................................Page 5

Installation............................................................................................Page 6

Selecting an Intensity/Power Setting.................................................Page 7

Selecting a Flash Code .......................................................................Page 7

Flash Codes .........................................................................................Page 8

Maintenance and Servicing ..............................................................Page 13

Troubleshooting ................................................................................Page 14

SL60 Optional Congurations..........................................................Page 15

SL60 Accessories..............................................................................Page 16

Sealite LED Light Warranty ..............................................................Page 18

Version No. Description Date Approved

3.3 Re launch Catalogue May 2009 K. Paton

3.4 Custom Manual April 2010 K. Paton

3.5 Logo Update May 2010 K. Paton

3.6 Warranty Update July 2010 K. Paton

4.0 Update: Quality Logo May 2011 J. Dore

4.1 Update: Spec Table May 2012 J.Dore

Latest products and information available at www.sealite.com

SL60 2-3nm+ Solar Marine Light

Introduction

Congratulations! By choosing to purchase a Sealite lantern you have become the owner of

one of the most advanced LED marine lanterns in the world.

Sealite Pty Ltd has been manufacturing lanterns for over 25 years, and particular care has been taken to

ensure your lantern gives years of service.

As a commitment to producing the highest quality products for our customers, Sealite has been independently

certied as complying with the requirements of ISO9001:2008 quality management system.

Sealite lanterns comply with requirements of the US Coast Guard in 33 CFR part 66 for Private Aids To

Navigation.

By taking a few moments to browse through this booklet, you will become familiar with the versatility of your

lantern, and be able to maximise its operating function.

Please remember to complete the Sealite warranty registration card accompanying your lantern.

Operating Principle

The solar module of the lantern converts sunlight to an electrical current that is used to charge the battery. The

battery provides power to operate the lantern at night.

The asher unit has very low current requirements. A microprocessor drives an array of ultra bright LED’s

through a DC/DC converter, which enables the LED’s to operate within the manufacturer’s specications. The

battery is protected from over-charging within the circuit to ensure maximum battery life.

On darkness, the microprocessor will initiate a program check and after approximately 1 minute begin ashing

to the set code

Technology

Sealite is the world’s fastest growing manufacturer of marine aids to navigation. We

employ leading mechanical, optical, hardware & software engineers to create innovative

products to service the needs of our customers worldwide, and offer the widest range of

solar-powered LED lanterns in the marketplace.

Electronics

Sealite employs leading in-house electronic engineers in the design and development of software and related

circuitry. All individual electronic components are sourced directly by Sealite procurement staff ensuring that

only the highest quality components are used in our products.

LED Technology

All marine lanterns use the latest advancements in LED (Light Emitting Diode) technology as a light source.

The major advantage of LED’s over traditional light sources is well established in that they typically have an

operational life in excess of 100,000 hours, resulting in substantial savings to maintenance and servicing

costs.

Precision Construction

Commitment to investing in the design and construction of injection-moulded parts including optic lenses, light

bases and a range of other components ensures that all Sealite products are of a consistent & superior quality.

Optical Performance

Sealite manufactures a range of marine LED lenses moulded from multi-cavity dies. Complex shapes such as

the SL70, BargeSafe™ and 16-segment multi-focus lenses are a testament to the company’s superior

in-house lens manufacturing capabilities and outstanding optical performance.

Award-winning, Patented Technology

Several United States and Australian patent registrations are held on Sealite’s range of innovative designs,

with other regional patents pending in Canada, United Kingdom and Europe.

SL60 2-3nm+ Solar Marine Light

SL60 Model

The Sealite SL60 is the most popular and versatile 2-3nm+ solar marine light available. Made

from tough, durable polycarbonate and using the latest high-intensity LEDs, no expense has

been spared in the design and development of this lantern. Installation takes just minutes, and

a permanent ON/OFF switch allows for easy storage.

The unit is ideal for navigation, hazard lighting, aquaculture, perimeter lighting and a range of

other applications.

•Specications subject to change or variation without notice

*Subject to standard terms and conditions

†Intensity setting subject to solar availability

SPECIFICATIONS •

Light Characteristics

Light Source 6 ultra-high intensity LEDs

Available Colours Red, Green,White,Yellow, Blue

Maximum Available Intensity (cd)† Red - 11.4 Green - 20.0 White - 26.0 Yellow - 10.0

Visible Range (nm) 2–3+

Horizontal Output (degrees) 360

Vertical Divergence (degrees) 9

Reector Type Omnidirectional 360° LED Reector

(US Pat. No. 6,667,582.AU Pat. No. 778,918)

Available Flash Characteristics Up to 256 IALA recommended (user adjustable)

Intensity Adjustments Adjustable in 25% increments

LED Life Expectancy (hours) >100,000

Electrical Characteristics

Current Draw (mA) Refer to Sealite Power Calculator

Circuit Protection Integrated

Nominal Voltage (v) 3.6

Autonomy (days) >20 (14 hour darkness, 12.5% duty cycle)

Temperature Range -40 to 80°C

Solar Characteristics

Solar Module Type Multicrystalline

Output (watts) 1.4

Solar Module Efciency (%) 14

Charging Regulation Microprocessor controlled

Power Supply

Battery Type High grade NiMH - Environmentally friendly

Battery Capacity (Ah) 4

Nominal Voltage (v) 3.6

Battery Service Life Average 5 years

Physical Characteristics

Body Material LEXAN® Polycarbonate – UV-stabilised

Lens Material LEXAN® Polycarbonate – UV-stabilised

Lens Diameter (mm/inches) 150 / 57/8

Lens Design External optics with interior ute design

Mounting 4 x 4.5mm mounting holes

Height (mm/inches) 205 / 81/8

Width (mm/inches) 177 / 7

Mass (kg/lbs) 0.9 / 21/8 (SL60-LB 1 / 21/4. SL60/8Ah 1 / 21/4. SL60-LB/Ah 1.1 / 21/2.

SL60-LB/16Ah 1.5 / 31/3)

Product Life Expectancy Up to 12 years

Certications

CE EN61000-6-3:1997. EN61000-6-1:1997

Quality Assurance ISO9001:2008

Waterproof IP68

Intellectual Property

Patents US Pat. No. 6,667,582.AU Pat. No. 778,918

Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty * 3 years

Options Available • 8Ah battery

• 16Ah battery

• 200mm OD base

• 50mm pole mount adapter plate

Latest products and information available at www.sealite.com

SL60 2-3nm+ Solar Marine Light

Charging the Battery

New lanterns should be left in the sun for 1-2 days to ensure battery is charged before placing

in service. Please note, lantern will re-charge even when toggle switch is turned to ‘OFF’

position.

Preferred Installation Location

For best lantern performance, ensure solar modules are not covered and are in clear view

of the sun with no shadows.

Lantern Operation

Lantern is activated by ON/OFF Switch. Intensity and ash settings need to be set prior to activation.

1. Remove the marked ash adjustment bung from the base of the lantern and set internal toggle

switch to ‘ON’.

2. The power and range settings of the lantern are adjusted by setting the DIP switches inside the

lantern. Your lantern is normally set to maximum range (see ‘Selecting an Intensity/Power Setting’

section of this manual).

3. Set rotary switches to the required ash code (see ‘Selecting a Flash Code’ section of this

manual).

4. Replace ash adjustment bung.

5. A sealed vent on the base allows air transfer without moisture intake, and should not be disturbed.

6. To test place dark cover (towel or jacket) on top of light to activate sensor, light will come on.

7. Ensure that the unit is bolted to an even, at surface.

1 2

Rotary

Switch B

Rotary

Switch A

Intensity Setting

ON / OFF

Switch

User

Replaceable

Battery

Lantern

Base

Installation

Latest products and information available at www.sealite.com

SL60 2-3nm+ Solar Marine Light

Intensity/power settings on Sealite lanterns operate via DIP switches, located near the rotary switches

on the asher unit. The pulse settings may be used to reduce the power consumption and intensity

of the lantern. Setting the lantern to 25% intensity will reduce the power consumption to 25% of the

normal 100% setting and the range by 25%. This setting may be used to adjust the current draw of the

light to local sunlight conditions.

The following diagrams indicate intensity/power settings:-

Power Consumption Calculator

If the number of Full Sunlight hours is greater than 2.5-3.0 hours, please consider reducing the

intensity (Power) or reducing the Duty Cycle.

All lanterns have 2 rotary switches marked A and B on the asher unit. Turning the small arrows to the

appropriate number or letter will set the code (see ‘Flash Codes’ section, of this manual). The unit may

take up to one minute to activate a new ash code. A comprehensive list of available ash codes is

listed on pages in the ‘Flash Codes’ section of this manual.

Example:

100%

1 2

75%

1 2

50%

1 2

25%

1 2

Intensity

Setting

Power

mA / hour

100% 85mA

75% 64mA

50% 43mA

25% 22mA

SWITCH FLASH CODE ON OFF

A B

A 0 FL 3 S 0.3 2.7

Night Hours

(use 13.7 if

unknown)

Power

mA/hour

Duty Cycle

(e.g. 20% = 0.2)

Total power

used per night

(mA)

X X =

Total power

used per night

(mAh)

Solar Panel

Charge (mA)

Number of full sunlight hours

required to break even

(the amount of time it will take for the solar to

replace what the light took out overnight)

/ 176 =

Selecting an Intensity/Power Setting

Selecting a Flash Code - Rotary Switches A & B

Latest products and information available at www.sealite.com

SL60 2-3nm+ Solar Marine Light

Flash Codes

The Sealite SL60 may be set to any of 256 IALA recommended ash settings which are user-adjustable

onsite without the need for external devices.

SEALITE® code reference is listed by number of ashes

For the latest version of this document visit www.sealite.com,

or email [email protected]

Symbols

FL Flash followed by number Eg. FL 1 S, one ash every second

F Fixed

Q Quick ash

VQ Very quick ash

OC Occulting; greater period on than off

ISO Isophase; equal period on and off

LFL Long ash long

MO Morse code ( ) contains letter

For example, VQ (6) + LFL 10 S means 6 very quick ashes followed by a long ash, during a

10-second interval.

The amount of power your lantern draws through the night depends on the duty cycle, i.e. the amount of

time on as a proportion to the timing cycle. For example, 0.5 seconds on and 4.5 seconds off equals a

10% duty cycle.

It is best to operate at the lowest duty cycle appropriate to the actual needs of the application.

Recommended Rhythm for Flashing Light - IALA Regions A and B

MARK DESCRIPTION RHYTHM

Port Hand & Starboard Marks: Any, other than Composite Group Flashing (2+1)

Preferred Channel Starboard: Composite Group Flashing (2+1)

Preferred Channel Port: Composite Group Flashing (2+1)

North Cardinal Mark: Very quick or quick

East Cardinal Mark: Very quick (3) every 5 seconds or quick (3) every 10 seconds

South Cardinal Mark: Very quick (6) + long ash every 10 seconds or quick (6) + long ash every 15 seconds

West Cardinal Mark: Very quick (9) every 10 seconds or quick (9) every 15 seconds

Isolated Danger Mark: Group ashing (2)

Safe Water Mark: Isophase, occulting, one long ash every 10 seconds or Morse Code “A”

Special Marks: Any, other than those described for Cardinal, Isolated Danger or Safe Water Marks

Latest products and information available at www.sealite.com

SWITCH FLASH CODE ON OFF

A B

0 0 F (Steady light)

D 3 VQ 0.5 S 0.2 0.3

E 3 VQ 0.6 S 0.2 0.4

F 3 VQ 0.6 S 0.3 0.3

7 3 Q 1 S 0.2 0.8

8 3 Q 1 S 0.3 0.7

9 3 Q 1 S 0.4 0.6

A 3 Q 1 S 0.5 0.5

8 4 Q 1 S 0.8 0.2

B 3 Q 1.2 S 0.3 0.9

9 4 Q 1.2 S 0.5 0.7

C 3 Q 1.2 S 0.6 0.6

F 4 FL 1.5 S 0.2 1.3

1 0 FL 1.5 S 0.3 1.2

0 5 FL 1.5 S 0.4 1.1

0 4 FL 1.5 S 0.5 1.0

2 0 FL 2 S 0.2 1.8

3 0 FL 2 S 0.3 1.7

4 0 FL 2 S 0.4 1.6

5 0 FL 2 S 0.5 1.5

6 0 FL 2 S 0.7 1.3

7 0 FL 2 S 0.8 1.2

1 2 ISO 2 S 1.0 1.0

8 0 FL 2.5 S 0.3 2.2

9 0 FL 2.5 S 0.5 2.0

D 6 FL 2.5 S 1.0 1.5

1 5 FL 3 S 0.2 2.8

A 0 FL 3 S 0.3 2.7

2 5 FL 3 S 0.4 2.6

B 0 FL 3 S 0.5 2.5

3 5 FL 3 S 0.6 2.4

C 0 FL 3 S 0.7 2.3

D 0 FL 3 S 1.0 2.0

2 2 ISO 3 S 1.5 1.5

5 4 OC 3 S 2.0 1.0

E 2 OC 3 S 2.5 0.5

4 6 OC 3.5 S 2.5 1.0

4 5 FL 4 S 0.2 3.8

5 5 FL 4 S 0.3 3.7

E 0 FL 4 S 0.4 3.6

F 0 FL 4 S 0.5 3.5

6 5 FL 4 S 0.6 3.4

0 1 FL 4 S 0.8 3.2

1 1 FL 4 S 1.0 3.0

2 1 FL 4 S 1.5 2.5

3 2 ISO 4 S 2.0 2.0

3 6 OC 4 S 2.5 1.5

F 2 OC 4 S 3.0 1.0

3 1 FL 4.3 S 1.3 3.0

8 5 FL 5 S 0.2 4.8

4 1 FL 5 S 0.3 4.7

5 1 FL 5 S 0.5 4.5

9 5 FL 5 S 0.9 4.1

6 1 FL 5 S 1.0 4.0

SWITCH FLASH CODE ON OFF

A B

7 1 FL 5 S 1.5 3.5

4 2 ISO 5 S 2.5 2.5

8 2 LFL 5 S 2.0 3.0

0 3 OC 5 S 3.0 2.0

1 3 OC 5 S 4.0 1.0

2 3 OC 5 S 4.5 0.5

C 6 FL 6 S 0.2 5.8

B 5 FL 6 S 0.3 5.7

C 5 FL 6 S 0.4 5.6

8 1 FL 6 S 0.5 5.5

9 1 FL 6 S 0.6 5.4

A 1 FL 6 S 1.0 5.0

7 5 FL 6 S 1.2 4.8

B 1 FL 6 S 1.5 4.5

5 2 ISO 6 S 3.0 3.0

9 2 LFL 6 S 2.0 4.0

6 4 OC 6 S 4.0 2.0

3 3 OC 6 S 4.5 1.5

4 3 OC 6 S 5.0 1.0

A 4 FL 7 S 1.0 6.0

9 6 FL 7 S 2.0 5.0

5 6 OC 7 S 4.5 2.5

D 5 FL 7.5 S 0.5 7.0

C 1 FL 7.5 S 0.8 6.7

E 5 FL 8 S 0.5 7.5

B 4 FL 8 S 1.0 7.0

6 2 ISO 8 S 4.0 4.0

A 2 LFL 8 S 2.0 6.0

6 6 OC 8 S 5.0 3.0

B 2 LFL 8 S 3.0 5.0

F 5 FL 9 S 0.9 8.1

C 4 FL 9 S 1.0 8.0

7 6 OC 9 S 6.0 3.0

0 6 FL 10 S 0.2 9.8

1 6 FL 10 S 0.3 9.7

D 1 FL 10 S 0.5 9.5

2 6 FL 10 S 0.8 9.2

E 1 FL 10 S 1.0 9.0

1 4 FL 10 S 1.5 8.5

C 2 LFL 10 S 2.0 8.0

D 2 LFL 10 S 3.0 7.0

7 2 ISO 10 S 5.0 5.0

2 4 LFL 10 S 4.0 6.0

8 6 OC 10 S 6.0 4.0

5 3 OC 10 S 7.0 3.0

6 3 OC 10 S 7.5 2.5

F 1 FL 12 S 1.2 10.8

D 4 FL 12 S 2.5 9.5

3 4 LFL 12 S 2.0 10.0

0 2 FL 15 S 1.0 14.0

4 4 LFL 15 S 4.0 11.0

7 4 OC 15 S 10 5.0

A 6 LFL 20 S 2.0 18.0

E 4 FL 26 S 1.0 25.0

Latest products and information available at www.sealite.com

SL60 2-3nm+ Solar Marine Light

SWITCH FLASH CODE ON OFF ON OFF

A B

0 A FL (2) 4 S 0.5 1.0 0.5 2.0

E B VQ (2) 4 S 0.2 1.0 0.2 2.6

1 A FL (2) 4.5 S 0.3 1.0 0.3 2.9

2 A FL (2) 4.5 S 0.4 1.0 0.4 2.7

3 A FL (2) 4.5 S 0.5 1.0 0.5 2.5

F 9 FL (2) 5 S 0.2 0.8 0.2 3.8

2 C FL (2) 5 S 0.2 1.2 0.2 3.4

4 A FL (2) 5 S 0.4 0.6 0.4 3.6

0 7 FL (2) 5 S 0.5 1.0 0.5 3.0

1 7 FL (2) 5 S 1.0 1.0 1.0 2.0

9 B Q (2) 5 S 0.3 0.7 0.3 3.7

2 9 Q (2) 5 S 0.5 0.5 0.5 3.5

5 A FL (2) 5.5 S 0.4 1.4 0.4 3.3

7 8 FL (2) 6 S 0.3 0.6 1.0 4.1

A A FL (2) 6 S 0.3 0.9 0.3 4.5

6 A FL (2) 6 S 0.3 1.0 0.3 4.4

7 A FL (2) 6 S 0.4 1.0 0.4 4.2

9 9 FL (2) 6 S 0.5 1.0 0.5 4.0

2 8 FL (2) 6 S 0.8 1.2 0.8 3.2

3 7 FL (2) 6 S 1.0 1.0 1.0 3.0

3 9 Q (2) 6 S 0.3 0.7 0.3 4.7

A 9 FL (2) 7 S 1.0 1.0 1.0 4.0

7 B FL (2) 8 S 0.4 0.6 2.0 5.0

8 A FL (2) 8 S 0.4 1.0 0.4 6.2

4 7 FL (2) 8 S 0.5 1.0 0.5 6.0

8 8 FL (2) 8 S 0.8 1.2 2.4 3.6

5 7 FL (2) 8 S 1.0 1.0 1.0 5.0

4 C OC (2) 8 S 3.0 2.0 1.0 2.0

5 C OC (2) 8 S 5.0 1.0 1.0 1.0

F B VQ (2) 8 S 0.2 1.0 0.2 6.6

9 A FL (2) 10 S 0.4 1.6 0.4 7.6

6 7 FL (2) 10 S 0.5 1.0 0.5 8.0

7 7 FL (2) 10 S 0.5 1.5 0.5 7.5

6 9 FL (2) 10 S 0.5 2.0 0.5 7.0

8 7 FL (2) 10 S 0.8 1.2 0.8 7.2

B 9 FL (2) 10 S 1.0 1.0 1.0 7.0

9 7 FL (2) 10 S 1.0 1.5 1.0 6.5

4 9 Q (2) 10 S 0.6 0.4 0.6 8.4

B A FL (2) 12 S 0.4 1.0 0.4 10.2

C 9 FL (2) 12 S 0.5 1.0 0.5 10.0

D 9 FL (2) 12 S 1.5 2.0 1.5 7.0

A 8 FL (2) 15 S 0.5 1.5 2.0 11.0

A 7 FL (2) 15 S 1.0 2.0 1.0 11.0

8 B Q (2) 15 S 0.2 0.8 0.2 13.8

C A FL (2) 20 S 1.0 3.0 1.0 15.0

D A FL (2) 25 S 1.0 1.0 1.0 22.0

SWITCH FLASH CODE ON OFF ON OFF ON OFF

A B

7 9 Q (3) 5 S 0.5 0.5 0.5 0.5 0.5 2.5

5 9 VQ (3) 5 S 0.2 0.3 0.2 0.3 0.2 3.8

0 C VQ (3) 5 S 0.3 0.2 0.3 0.2 0.3 3.7

E 9 VQ (3) 5 S 0.3 0.3 0.3 0.3 0.3 3.5

3 C FL (3) 6 S 0.5 1.0 0.5 1.0 0.5 2.5

2 B FL (2+1) 6 S 0.3 0.4 0.3 1.2 0.3 3.5

Altri manuali per SL60

Indice

Altri manuali Sealite Illuminazione marina

Sealite

Sealite SL-155 Series Supplemento

Sealite

Sealite SL-75 Manuale utente

Sealite

Sealite SL-15 Supplemento

Sealite

Sealite SL-BR Supplemento

Sealite

Sealite SL-75 Supplemento

Sealite

Sealite SL-300-2D5 Series Supplemento

Sealite

Sealite SL-300-1D5 Series Supplemento

Sealite

Sealite SLC600 Supplemento

Sealite

Sealite TRIDENT-2600Q Supplemento

Manuali Illuminazione marina popolari di altre marche

Francis Searchlights

Francis Searchlights FX560 Manuale utente

Attwood

Attwood 5095 Manuale utente

Glamox

Glamox aqua signal TX20 Series Manuale utente

Attwood

Attwood 3100 Manuale utente

Imtra

Imtra BCM California 60 Manuale utente

Hella marine

Hella marine NAVILED PRO 2NM Manuale utente

ACR Electronics

ACR Electronics 3940 Istruzioni per l'installazione

ETI Solid State Lighting

ETI Solid State Lighting 504081020 Manuale utente

Sea gull lighting

Sea gull lighting Traverse Lyte Retrofit Kit Manuale utente

Attwood

Attwood 3830 Manuale utente

Attwood

Attwood 911339 Manuale utente

Daniamant

Daniamant W3-1 Manuale utente

Sabik Marine

Sabik Marine carmanah 800 Series Manuale utente

Attwood

Attwood 91041 Manuale utente

Tranberg

Tranberg TEF 2438N Manuale utente

Weems & Plath

Weems & Plath 700 Manuale utente

Hella marine

Hella marine NaviLED 360 2LT 980 960-0 Series Manuale utente

Hella marine

Hella marine NaviLED 360 PRO 2LT 980 910 Series Manuale utente