Secabo TC5 Smart Manuale utente
OPERATING MANUAL
for the modular heat presses
Secabo TC5 SMART and TC7 SMART
Congratulations on the purchase of your Secabo heat press!
Please read this operating manual carefully to ensure a smooth production launch with your new
device.
Any type of reproduction of this operating manual requires the written permission of Secabo
GmbH. Modifications to and errors in the technical data and/or product characteristics are
reserved.
Secabo GmbH accepts no liability for any direct or indirect damages resulting from the use of this
product.
Version
1.1 (01.12.2017)
1
Safety Precautions
Please read the information and safety precautions carefully prior to first commissioning of the
device!
● Never reach inside the heat press with your hands when it is connected to the power
supply, especially if it is switched on and heated up – danger of burns!
● Never open the casing and do not make any modifications to the unit yourself.
● Should it be necessary to open the heat plate cover upon explicit request by Secabo's
customer service team, it is recommended you wear respiratory protection and only touch
the insulation wool located therein using gloves. Possible disposal of the insulation wool
should only be done inside a closed bag.
● Ensure that neither liquids nor metal objects reach the inside of the heat press.
● Make sure you use a grounded wall socket. Keep in mind that a heat press may only be
operated using a wall socket equipped with a ground fault circuit interrupter.
● Disconnect the heat press from the power supply when it's not in use.
● Always ensure that the heat press is out of reach of children during operation and never
leave the device unsupervised when switched on.
● Make sure the unit is only used in dry rooms.
If you cannot comply with one or more of the aforementioned safety rules, or if you are
unsure as to whether you're in compliance with all of the points, please contact our
technical support.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
2
Items included
Mechanical base of the heat
press
heat press base
Heat plate and base plate
HP5
- 38cm x 38cm
or
HP7
- 40cm x 50cm
depending on the model
Controller box
HPC01
C13 Cold device cable
Size 5 Allen key for M6 inner
hexagonal screws
Spanner 13 for M8 hexagon
screws
Machine description
a. Main switch
b. Liquid Crystal Display (LCD)
c. Control panel with buttons and rotary push setter
d. Hand wheel for pressure adjustment
e. Press lever
f. Heat plate cover and heat plate
g. Base plate
h. Button for manually opening the press
i. IEC socket and internal connections (not depicted)
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
4
Installation and Commissioning
● Safely set up the base frame heat press base
of the TC5 SMART or TC7 SMART heat
press on a sturdy table.
● Open the press lever at the heat press base
in such a manner that it points steeply
upwards.
● Position the heat plate HP5
or HP7
- depending on the model - in front of the connecting
flange below the press lever on the heat press base
at a slant and thread the 4 outer
screws heads into the keyhole grooves on the flange plate.
● Carefully tighten the screws using the included Allen key. Attention: As long as the
screws are not properly tightened, the heat plate may fall down! Risk of injury!
● Lift the supplied base plate over the heat press base's
socket and thread the screw heads
of the hexagon screws through the keyhole grooves on the black adapter plate at the
bottom side of the base plate.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
5
● Tighten the 4 Allen screws using the supplied size 13 spanner.
● Position the controller box at the upper rear center of the base frame of the TC5 SMART or
TC7 SMART heat press and let the studs at the controller box slide into the slots on the
heat press base
. Securely tighten the hand nuts.
● Attach the small 6-pin plug from the rear side of the heat press base
to the appropriate
socket on the outer right side of the controller box.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
6
● Attach the large 5-pin plug from the surface of the heat plate to the appropriate socket on
the right outer side of the controller box.
● Plug the supplied C13 cold device cable into the back of the controller box and connect it to
a safety socket, which must be equipped with a grounded connection, protection via fuse
and ground fault circuit interrupter.
The TC5 SMART or TC7 SMART heat press is now ready for use.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
7
Controller components and operation
Display components and their meaning
Area for time setting and countdown when press is closed
Area for time setting and activity indicator of the pre-press feature
Icon for the Bluetooth connection
General indicator for fault or error
Area for temperature indicator for target temperature and actual
temperature
Indicator: Heat plate's heating active
Indicator: Press is done heating up
Indicator: Press is currently heating up or cooling down. If below
the set temperature, up arrow will flash.
Indicator for management of memory slots
Counter for counting the performed press operations
How to use the controller
Setting the temperature:
Briefly press , the symbol in the display starts flashing. The value in the display
changes from the current ACTUAL value to the TARGET value, which can now be set.
Turn clockwise to increase the TARGET temperature, counterclockwise to decrease.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
9
Press the rotary knob or press to store the set value. If no input occurs for 5
seconds, input mode ends automatically. Pressing exits input mode, the set
value is not applied and the display returns to the current ACTUAL value.
Temperature-related indicators:
is activated whenever the heater is running.
During the warm-up phase, every 10s an estimated remaining warm-up time scrolls across
the display for 3s instead of the current temperature.
is activated when the CURRENT temperature corresponds with the TARGET
temperature, allowing for a certain deviation of X°.
Arrow up is activated when the temperature is rising (if below TARGET
temperature, arrow is blinking), arrow down is activated when the temperature is dropping,
e.g. during a transfer or if the heat plate is still hotter than the set target temperature.
is generally activated in the event of faults or errors, and when there is a significant
deviation between TARGET and CURRENT temperature (value outside of a range that
allows for pressing).
Setting the time:
push briefly, symbol in the display flashes. Turning the rotary knob clockwise
increases time, counter-clockwise decreases. Press the rotary knob or press to
store value. If no input occurs for 5 seconds, input mode ends automatically. Pressing
will exit the input mode, the display will return to its original value.
Secabo GmbH Hochstatt 6-8 85283 Wolnzach Germany [email protected] www.secabo.com
10
Altri manuali per TC5 Smart
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Secabo Utensili elettrici
Secabo
Secabo TCC SMART Manuale utente
Secabo
Secabo TC5 Smart Manuale utente
Secabo
Secabo TC D2 Manuale utente
Secabo
Secabo TC1 Manuale utente
Secabo
Secabo TC5 Smart Manuale utente
Secabo
Secabo TCC Lite Manuale utente
Secabo
Secabo TMUG Manuale utente
Secabo
Secabo TM5 Manuale utente
Secabo
Secabo TS7 Manuale utente
Secabo
Secabo TM2 Manuale utente
