Secura S25V Guida utente

SECURITY ALARM SYSTEM

INSTALLER MANUAL

MODEL: S25V

V : 3.3

Contents

Introduction The Secura Security Alarm System ---------------------------------- [4]

LCD Display Description -------------------------------------------------------------- [4]

Master / User Codes ------------------------------------------------------------------- [4]

Info Key --------------------------------------------------------------------------------- [5]

Installer Code --------------------------------------------------------------------------- [5]

Arming ---------------------------------------------------------------------------------- [5]

Instant Stay Arming ------------------------------------------------------------------- [5]

Instant Arming -------------------------------------------------------------------------- [6]

Stay Arming ----------------------------------------------------------------------------- [6]

Quick Arming ---------------------------------------------------------------------- [6]

Quick Instant Stay Arming ------------------------------------------------------------ [6]

Quick Stay Arming --------------------------------------------------------------------- [6]

Disarming / Stopping The Alarm ---------------------------------------------------- [6]

Zone Bypassing ------------------------------------------------------------------------- [6]

PGM Output Activation / Deactivation (Mono – Stable / Bi – Stable) ------- [6]

System Troubles Display -------------------------------------------------------------- [7]

Memory Display ------------------------------------------------------------------ [7]

Chime Feature On / Off --------------------------------------------------------------- [7]

Program / Modify User Codes ------------------------------------------------------- [7]

Selective Erasure Of User Codes ---------------------------------------------------- [7]

Erasure Of All User Codes (Except The Master Code) ------------------------- [8]

Cancellation Of Phone Communication --------------------------------------------- [8]

Programming The Phone Number ---------------------------------------------------- [8]

Selective Erasure Of Phone Number ------------------------------------------------ [8]

Erasure Of All Phone Number ------------------------------------------------------- [8]

System Date and Time Programming ------------------------------------------------ [8]

Keypad Special Alarms (By Pressing 2 Keys) ------------------------------------- [9]

Section [00]: Zone Programming -------------------------------------------------------- [9]

Section [06]: Zone Fast Response Time Setup --------------------------------------- [11]

Section [07]: Zone Response Time ----------------------------------------------------- [11]

Section [08]: Set Of Option -------------------------------------------------------------- [12]

Section [09]: Set Of Option -------------------------------------------------------------- [12]

Section [10]: Set Of Option -------------------------------------------------------------- [13]

Section [11]: Split / Double Reporting Options for CMS1 and CMS2 ------------ [13]

Section [12]: Entry Time / Exit Time -------------------------------------------------- [13]

Section [13]: Burglary / Fire Bell Cut Off Times ------------------------------------ [14]

Section [14]: AC Power Loss Transmission Delay ------------------------------------ [14]

Section [15]: Activation Time For Mono – Stable PGMs --------------------------- [14]

Section [16]: Installer Code Changing ------------------------------------------------- [14]

Section [17]: Modification Of The Master Code ------------------------------------- [15]

Section [18]: Ring Number For The System Answers ------------------------------- [15]

Section [19]: Voice Transmission Duration ------------------------------------------- [15]

Section [20]: Number Of Dialing Sequences ----------------------------------------- [15]

Section [22]: Programmable Output For PGM1 & PGM2 -------------------------- [15]

Section [24]: First Phone Number For CMS ------------------------------------------ [16]

Section [25]: Second Phone Number For CMS --------------------------------------- [16]

Section [26]: Panel Account Number For CMS -------------------------------------- [16]

Section [27]: Event For CMS Transmission ------------------------------------------- [17]

Section [28]: Event For CMS Transmission ------------------------------------------- [17]

Section [29]: Event For CMS Transmission ------------------------------------------- [18]

Section [30]: Event For CMS Transmission ------------------------------------------- [18]

Section [31]: Event For CMS Transmission ------------------------------------------- [18]

Section [34]: Daily Test Time Setting ------------------------------------------------- [19]

Section [35]: Cancellation Of Phone Communication -------------------------------- [19]

Section [36]: CMS Communication Test ------------------------------------------------ [19]

Section [37]: Walk Test ------------------------------------------------------------------- [20]

System Call Out / Call In To System - Without Voice Module -------------------- [20]

System Call Out / Call In To System - With Voice Module ----------------------- [21]

Technical Specifications ------------------------------------------------------------------ [22]

Reset To Default Procedure -------------------------------------------------------------- [22]

General Mounting Diagram For System Board --------------------------------------- [23]

Automation / External Module Connection --------------------------------------------- [24]

Warranty Of Secura Security Alarm System ------------------------------------------- [27]

Note -------------------------------------------------------------------------------------------- [27]

INTRODUCTION THE SECURA SECURITY ALARM SYSTEM

The Secura Security Alarm System is manufactured to the highest specification and will

provide many years of service if correctly installed and maintained. The unit is designed for

simple operation to provide the maximum protection for you, your family or business.

LCD DISPLAY DESCRIPTION

10 : 12 : 00 AC S

123456789012

Within the protected area, up to 4 keypads can be installed, LCD will light up for 10 seconds

when a keypad key is pressed and will automatically cut off light if no key is pressed after 10

seconds. The LCD displaying clock in 24 hours format, system status “ACDS” and zone open /

close status, the meaning of ACDS are :-

Character

Descriptions

System Armed

Chime Enabled

System Disarmed

System Troubled

MASTER AND USER CODES

The 1st User code (Master code): programmed (1234) by default

The allowed operations for the Master code are: Arming, Disarming, Bypassing / Un-bypassing zones,

Program / Delete user codes, Program / Delete phone number, Set system date and time.

The 2nd – 14th User codes: not programmed by default.

Allowed operations: Arming, Disarming, Bypassing / Un-bypassing zones

User code 15th has the Ambush capability and is not programmed by default.

In case the system is connected to a CMS by means of a phone line, it will transmit this special code to

the CMS as under threat.

SECURA

▲

▼

BYPS

INST

STAY

INFO KEY – [ ? ]

User can press the INFO KEY [?] and use [▲] or [▼] arrow key to browse a quick key reference as

below. Press [#] key to exit.

website

*0 – Quick Arm

*1 – Quick I / S Arm

*2 – Quick S Arm

*3 – 1 or 2 PGM1 or 2 On / Off

*4 – System Status

*5 – Event Memory

*6 – Chime En / Disable

*7 – [Code] – Mast. Setup

1+3 Emergency

4+6 Panic

7+9 Fire

INSTALLER CODE – [2525]

This code gives total access to the system – programming menu, but no access to the user function. The

installer code is (2525) by default.

The panel parameters are programmed using this code, through [*][8][Installer code] command, only

possible when the control panel is disarmed.

ARMING – [CODE]

After entering a valid user code, LCD will be indicated “Armed” for a second and the keypad

buzzer will sound beeps. The “A” will be shown at the corner of LCD, if there are any User

bypassed zone in the system, the “X” will be lit.

INSTANT STAY ARMING – [INST][STAY][CODE]

In this arming mode, upon expiry of the exit time, the zone programmed as entry / exit

(delayed) type will trigger the alarm as soon as they are violated.

If there are zones that have the Stay attribute enabled by programming (or if there are user-

bypassed zones in the system) the “X” will be displayed at the LCD.

INSTANT ARMING – [INST][CODE]

In this arming mode, the zone programmed as entry / exit (delayed) type and zones that have

the Stay attribute enabled by programming will trigger the alarm as soon as they are violated.

STAY ARMING – [STAY][CODE]

In this arming mode, the entry / exit type (delayed) will function as usual. If violated during

arming, they will trigger the alarm unless a valid code is entered.

If there are zones that have the Stay attribute enabled by programming (or if there are user-

bypassed zones in the system) the “X” will be displayed at the LCD.

QUICK ARMING – [*][0]

Quick arming functions allow the system to be quickly armed by User who may not own a user

code. After that, the user must leave the premises before the exit time has expired.

QUICK INSTANT STAY ARMING – [*][1]

This arming type is similar to INSTANT STAY ARMING.

QUICK STAY ARMING – [*][2]

This arming type is similar to STAY ARMING.

DISARMING / STOPPING THE ALARM – [CODE]

When an entry / exit zone is violated, the keypad buzzer will sound beeps during the entry time,

reminding the User that the system must be disarmed using Master code or User code.

ZONE BYPASSING – [BYPS][CODE]

To bypass a zone press the zone number will turn off. To un-bypass a zone, press the zone

number again.

Note: Zone 10 = 0, Zone 11 = (Press key * 1) and Zone 12 = (Press key * 2)

Exit zone bypass mode by pressing [#] key.

PGM OUTPUT ACTIVATION / DEACTIVATION (Mono-stable / Bi-stable) –

[*][3][1] & [*][3][2]

The PGM1 or PGM2 output programmed as mono-stable, will be actives for the time lapse

programmed in SECTION [15].

If the PGM1 or PGM2 output programmed as bi-stable, will change its status from activated to

de-activated, and vice versa.

Note: [*][3][1] for PGM1 and [*][3][2] for PGM2.

SYSTEM TROUBLES DISPLAY – [*][4]

The system permanently monitors several internal conditions for its proper functioning, such as:

Item

System Troubles

Battery low voltage

AC power loss

Unsuccessful phone communication

Date and time not programming

Bell trouble

If any system trouble, “S” shown on LCD display and will be disappeared all problems are

fixed.

Exit system trouble display by pressing [#] key.

MEMORY DISPLAY – [*][5]

To view the User program / modify the system or alarms occurred in the system by pressing

the key [▲] or [▼] to scroll, you can see the next event occurred up to 448 events.

Exit the Alarm Memory Display mode by pressing [#] key.

CHIME FEATURE ON / OFF – [*][6]

Once the Chime feature is enabled, the “C” will be displayed at right corner of the LCD and if

any zone opened the keypad buzzer will sound beeps.

PROGRAM / MODIFY USER CODES (01-15) – [*][7][MASTER CODE]

After entering the commands, the “Mast. Setup No#” is displayed followed by 3 beeps, select

the User from 01 to 15 for new code.

Note: [01] is Master code and [02 – 15] is User code.

Exit the Master Setup Number by pressing [#] key.

SELECTIVE ERASURE OF USER CODES – [*][7][MASTER CODE][3][0]

After entering the commands, the “Mast. Setup No#30 Erase User#” is displayed followed by 3

beeps.

Erase the selected user code by entering the 2 digits from 02 to15 then press [*] key to confirm.

Exit the Master Setup Number by pressing [#] key.

ERASURE OF ALL USER CODES (EXCEPT THE MASTER CODE) –

[*][7][MASTERCODE][3][1]

After entering the commands, the “Erase All Users * to confirm?” is displayed followed by 3

beeps then press [*] key to erase all users code in system.

Exit the Master Setup Number by pressing [#] key.

CANCELLATION OF PHONE COMMUNICATION – [*][7][MASTER CODE][4][9]

This command allows the User to cut off any phone communication when carrying out a test.

PROGRAMMING THE PHONE NUMBER – [*][7][MASTER CODE][51…54]

After entering the commands, the “User Phone Num1” is displayed followed by 3 beeps, enter

[51] for 1st user phone number to [54] for 4th user phone number.

Note: [*][1] for home prepaid line and [9][*][3] for key phone setting.

EX: * 3172527 for home prepaid setting – [*][1][3][1][7][2][5][2][7]

93172527 for key phone setting – [9][*][3][3][1][7][2][5][2][7]

Exit the Master Setup Number by pressing [#] key.

SELECTIVE ERASURE OF PHONE NUMBER – [*][7][MASTER CODE][51…54][*][5]

After entering the commands, the “User Phone Num1” is displayed followed by 3 beeps then

select the phone number you want to erase and pressing [*][5] keys.

Exit the Master Setup Number by pressing [#] key.

ERASURE OF ALL PHONE NUMBERS – [*][7][MASTER CODE][5][0][*]

After entering the commands, the “Erase All Phone# * to confirm?” is displayed followed by 3

beeps then press [*] key to erase all phone numbers in the system.

Exit the Master Setup Number by pressing [#] key.

SYSTEM DATE AND TIME PROGRAMMING – [*][7][MASTER CODE][6][0]

After entering the commands, the “Set Date&Time#60” is displayed followed by 3 beeps. To

program / modify the date and time of the system follow the format: [yymmdd] first page and

[hhmmss] second page. Each 2 digit group represents the year, month, day for [yymmdd] and

hour, minute, second [hhmmss].

Exit the Master Setup Number by pressing [#] key.

KEYPAD SPECIAL ALARMS (BY PRESSING 2 KEYS)– [1]+[3], [4]+[6] AND [7]+[9]

System will send a reporting code to the CMS and phone call with a voice message or

synthesis sounds, according to these events: Panic Alarm [4]+[6], Medical Alarm [1]+[3], Fire

Alarm [7]+[9] by pressing a combination of keys from keypad.

SECTION [00]: ZONE PROGRAMMING – [*][8][INSTALLER CODE][0][0]

After the command has been entered, the “Zone Setup #00” is displayed, followed by 3 beeps

waiting for zone number and zone type number to be entered.

Select one of the zones from [01] to [12] then followed by zone type according to the table

below:

Zone types table:

Zone

Descriptions

[01] – Delayed zone

[02] – Follower zone.

[03] – Instant zone.

[04] – 24 hour zone.

[05] – Phone Cut

Detection

zone.

[10] – 24 hour

Tamper zone.

[11] – 24 hour Panic

zone.

[12] – 24 hour Fire

zone.

[13] – 24 hour

Medical

Emergency

zone.

[14] – Key switch

zone. (Pulse)

[15] – Pre warning

zone.

[16] – Key switch

zone. (Latch)

A delayed zone is usually used for entry / exit doors.

The follower zones are generally used for the interior motion detectors and follow the

system’s programmed exit time and alarm will not be generated instantly.

Instant zone is not active during the exit time but they will generate the alarm as soon

as they are violated after the exit time has expired.

This zone type is useful for the connection of glass-break detector.

The Phone cut detection zone is a one minute delayed time. If the zone is restored

within a minute, alarm will not be triggered.

This zone type is useful for the connection of tamper contact in the system to prevent

any sabotage attempt after the system installation and commissioning.

This zone type is useful for connection of panic button for a specific event to occur in

emergency situations.

This zone type is useful for the connection of smoke and heat detector.

This zone type is useful for the connection of emergency button for a specific event to

occur in emergency situations.

The system will be armed or disarmed if connected to RF remote control unit.

Any violation of this zone will make the siren sound half second when system is armed

and no alarm will occur.

The system will be armed when zone close and disarmed when zone open.

After 2 digits number corresponding to the desired zone type has been entered, the displaying

of the attributes 1 to 8 can be enabled / disabled based on the corresponding numbers on / off

status.

Zone attributes table:

Attributes available according to zone types:

Attribute

OFF

Descriptions

Audile alarm

Steady siren

Enable Bypass

Enable Swinger

shutdown

Forced arming

Activate Chime

Stay zone

Normally Close

(NC)

Silent alarm

Pulsing siren

Disable Bypass

Disable Swinger

shutdown

No Force arming

Un-active Chime

Perimeter zone

Normally Open

(NO)

An alarm triggered by an audible zone activates the siren,

while an alarm triggered by a silent zone does not activate

the siren.

A zone with steady siren attribute activates the steady

siren output for the time lapse, while a pulsing siren zone

activates the pulsing siren output for the same time lapse.

A zone having the bypass attribute enabled is allowed to

be bypassed by one of the command.

If the attribute Swinger shutdown is enabled the

respective zone will automatically be bypassed by the

system after 3 restorations.

A zone with the Forced arming attribute enabled will

allow arming during zone open.

A zone having the Chime attribute enabled will make the

keypad buzzer sound beeps.

A zone having the Stay attribute enabled is an interior

zone, which will automatically be bypassed by the

system.

It will toggle from open to close or vice versa when they

are pressed.

Zone Types

Audible /

Silent

Steady /

Pulsing

Bypass

Swinger

Shutdown

Forced

Arming

Chime

Stay

NC /

[01] - Delay

[02] - Follower

[03] - Instant

[04] - 24h zone

[05] - Phone cut

[10] - Tamper

[11] - Panic

[12] - Fire

[13] - Medical

[14] - Key switch

(Pulse)

[15] - Pre warning

[16] - Key switch

(Latch)

√

Indice

Altri manuali Secura Sistema di sicurezza

Secura

Secura SecuraHub Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente