Release Version 1.3
1
Safety Warnings and Cautions
This is to protect user safety and prevent property damage.
Please read carefully and use it correctly.
Warning (If not followed, the user may die or be seriously injured.)
■Before installation, be sure to disconnect the power cord from the device before installation.
Also, do not use multiple power plugs at the same time.
- There is a risk of overheating, fire and electric shock.
■Do not expose the device to dripping or splashing water, and do not place anything filled
with water, such as a vase, on top of the device.
- If liquid spills into the product, it may cause malfunction or fire.
■Since there is a high voltage part inside this device, do not open the lid arbitrarily and never
disassemble, repair, or modify it.
- There is a risk of fire, electric shock, or injury due to abnormal operation.
■Do not install in a place with a lot of moisture, dust or soot.
- It may cause electric shock or fire.
■During and after installing the device, always keep the place where the device is located
clean and free of dust. In particular, when cleaning the device, be sure to wipe it with a dry
towel, and do not use water, thinner, or organic solvents.
- There is a possibility of damaging the surface of the device, and there is a risk of breakdown and electric
shock.
■Place the product in a cool place out of direct sunlight, maintain an appropriate temperature,
and avoid sources of heat such as candles and heaters. Also, keep equipment and tools away
from places where people come and go.
- There is a risk of fire.
■Pay close attention to possible hazards in the work area, such as damp floors, ungrounded
power extension cables, worn power cords, and lack of safety grounding. In case of problems,
contact the place of purchase or an expert.
- There is a risk of fire and electric shock.
■Various external input/output ports such as the power cord protrude from the back of the
device, so if installed too close to the wall, the cable may be bent or pressed forcibly, resulting
in breakage or breakage. Keep the back of the product at least 15 cm away from the wall and
the side at least 5 cm away.
- It may cause fire, electric shock or injury.
■The voltage fluctuation range for the input voltage for the operation of this device is within
10% of the specified voltage. Also, do not use electric heaters such as hair dryers, irons, and
refrigerators together with the outlet to which the power connector is connected.
- It may cause abnormal heat, fire or electric shock.
■When there is thunder or lightning, pay attention to safety and unplug the power plug.
■Use a power source that satisfies the Limited Power Supply Test (LPS).
