Sega CAPTO CRANE Manuale utente

tJCllJ

•

't'Machine operating instructions

O840*W812*H21 00MM

Product Name: Capto Crane Type

Claw CraneMachine

Model: MK-I

Machine voltage power: 110V/220V @200w

Specification Version:Ver1 .2

System version: SG401

Please refer to the detailed instructions before use ,and please keep the manual for future

reference

The product you actually receive may be slightly different from the one shown in this instruction, and tt,e contents of

this instruction may not be changed as a result of the product update.

BEFOREUSINGTHEPRODUCT,

BE SURE TO READ THE FOLLOWING:

TO MAINTAIN SAFETY:

To ensure the safe operation of this product, be sure to read the following before usage:

The following instructions are intended for the users, operators and the personnel in charge of the operation of the

product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product

appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially

hazardous degrees, the terms of "DANGER", "WARNING", "CAUTION", etc. are used. Be sure to understand the

contents of the displays before reading the text.

Indicates that mishandling the product by disregarding this pictograph will cause severe

injury or death

Indicates that mishandling the product by disregarding this warning will cause a potentially

hazardous situation which can result in death or serious injury

Indicates that mishandling the product by disregarding this caution will cause a slight

hazardous situation which can result in personal injury and/or material damage

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE". In order to protect the human body and equipment, this display is

attached to places where the instruction manual should be referred to

Indicates a "protective earth terminal." Before operating the equipment, be sure to connect it to the

ground (this step may be omitted for products in which a power cable with earth is used)

•

PERFORM WORK IN ACCORDANCE WITH THE INSTRUCTIONS HEREIN STATED

Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work

as per the instructions can cause accidents. In the case where only those who have technical expertise should

perform the work to avoid hazardous situation, the instructions herein

state that the site maintenance personnel should perform such work

•

BE SURE TO TURN OFF THE POWER BEFOREWORKING ON THE MACHINE

To prevent an electric shock, be sure to turn off the power and unplug the power cable before carrying out any

work that requires direct contact with the interior of the product. If the work is to be performed in the power-on

status, the instruction manual herein always states to that effect

•

BE SURE TO GROUND THE EARTH TERMINAL (THIS IS NOT REQUIRED IN THE CASE WHERE A

POWER CABLE WITH EARTH ISUSED)

This product is equipped with the earth terminal. When installing the product, connect the earth terminal to the

"accurately grounded indoor earth terminal" by using an earth wire. Unless the product is grounded

appropriately, the user can be subject to an electric shock. After performing repair, etc. for the control

equipment, ensure that the earth wire is firmly connected to the control equipment

•

ENSURE THAT THE POWER SUPPLY USED IS EQUIPPED WITH AN EARTH LEAKAGE BREAKER

Using a power supply which is not equipped with the earth leakage breaker can cause a fire when earth leakage

occurs

•

BESURE TOUSE FUSES WHICH MEET THE SPECIFIED RATING (ONLYFOR THE MACHINES

WHICH USEFUSES)

Using fuses exceeding the specified rating can cause a fire and an electric shock

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

•

SPECIFICATION CHANGES (REMOVAL OF EQUIPMENT, CONVERSIONS AND ADDITIONS)NOT

DESIGNATED BY SEGA ARE NOTALLOWED

The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous

to operate the product by removing parts and/or modifying the circuits. Should doors, lids and protective parts be

damaged or lost, refrain from operating the product, and contact where the product was purchased from or the

office herein stated.

SEGA shall not be held responsible for any accidents or compensation for damage to a third party

resulting from the specifications not designated by SEGA

•

ENSURETHATTHEPRODUCTMEETSTHEREQUIREMENTSOFAPPROPRIATEELECTRICAL

SPECIFICATIONS

Before installing the product, check for electrical specifications. SEGA products have a nameplate on which the

electrical specifications are described. Ensure that the product is compatible with the power supply voltage and

frequency requirements of the location. Using any electrical specifications different from the designated

specifications can cause a fire and an electric shock

•

INSTALLAND OPERATETHE PRODUCT IN PLACES WHERE APPROPRIATE LIGHTING IS

AVAILABLE, ALLOWING WARNING LABELS TO BECLEARLY READ

To ensure safety for the customers, labels and printed instructions describing potentially hazardous situations are

applied to places where accidents can be caused. Ensure that where the product is operated has sufficient lighting

allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with

where the product was purchased from or the office herein stated

•

WHEN HANDLING THE MONITOR, BE VERY CAREFUL (APPLIES ONLY TO PRODUCTSWITH

MONITORS)

Some of the monitor parts are subject to high tension voltage. Even after turning off the power, some portions

are still subject to high tension voltage. Monitor repair and replacement should be performed only by those

technical personnel who have knowledge of electricity and technical expertise

•

BE SURE TO ADJUST THE MONITOR PROPERLY(APPLIES ONLYTO PRODUCTS WITH MONITORS)

Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the monitor not

properly adjusted may cause dizziness or a headache to an operator, a player, or customer

•

WHEN TRANSPORTING OR RESELLING THIS PRODUCT, BE SURE TO ATTACHTHIS MANUAL TO

THE PRODUCT

In the case where commercially available monitors and printers are used in this product, only the contents relating

to this product are explained herein. Some commercially available equipment has functions and reactions not

stated in this manual. Read this manual together with the specific instruction manual of such equipment

Descriptions herein contained may be subject to improvement changes without notice

The contents described herein are fully prepared with due care. However, should any question arise or errors

be found, please contact SEGA

Normally, at the time of shipment, SEGA products are in a state allowing for usage immediately after transporting

to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on the power,

check the following points to ensure that the product has been transported in a satisfactory status:

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are casters

and/or adjusters damaged?

Do the power supply voltage and frequency requirements meet with those of the location?

Are all wiring connectors correctly and securely connected? Unless connected in the correct way, connector

connections cannot be made accurately. Do not insert connectors forcibly.

Do power cables have cuts and/or dents? Are all

accessories available?

Can all doors and lids be opened with the accessory keys? Can doors and lids be firmly closed?

Indicates important information that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product.

Indicates a warning or caution that, if ignored, may result in the mishandling

of the product and cause faulty operation or damage to the product.

INTRODUCTION

This manual is intended to provide detailed descriptions together with all necessary information covering the general operation of electronic

assemblies, electromechanical, servicing control, spare parts, etc. for the product:

Capto Crane

This manual is intended for the owners, personnel managers in charge of operation of this product. Operate the product

after carefully reading and sufficiently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician to touch the internal system.

Turn off the power to the machine, making sure to unplug the electrical cord from the outlet, and contact the office listed below or the point-of-

purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special attention are indicated by

bold text, the words "STOP, IMPORTANT or CAUTION” and the symbols below.

Sega Amusements Europe Limited.

42 Barwell Business Park, Leatherhead Road, Chessington, Surrey, KT9 2NY. United Kingdom.

European Sales:

+44 (0) 208 391 8090

Facsimile:

+44 (0) 208 391 8099

USA Sales:

+00 (1) 224 265 4287

STS (Spares):

+44 (0) 208 391 8060

Facsimile:

+44 (0) 208 391 8096

email:

[email protected]

Web:

http://www.segaarcade.com

Standard Cabinet

Machine Dimensions:

Machine Height:

Machine Weight:

Power, maximum current:

Rating:

SPECIFICATIONS

0.82m[Width] x 0.84m [Depth]

2.09m (Installed)

130kg Approx. (Installed)

1A @220V / 1.8A @115VAC

110vac @ 50/60Hz –220W (consumption)

iii

INTRODUCTION

Procedures not described in this manual or marked as ‘to be carried out by site

maintenance personnel or other qualified professionals’ should not be carried

out by personnel without the necessary skill or technological experience. Work

carried out by unqualified persons may cause serious accidents, including

electrocution.

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualified professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialised knowledge.

The site maintenance personnel or other qualified professionals mentioned in this manual are defined as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the super-

vision of the owner/operator of this product to maintain machines within amusement facilities or similar premises by

carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/expendable

parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualified professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or mainte-

nance of amusement equipment. The individual should have either graduated from technical school or hold similar

qualifications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualified professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

Definition of 'Site Maintenence Personnel’ or Other Qualified Individuals

INTRODUCTION

Battery Recycling Statement.

The WEEE (Waste of Electrical and Electronic Equipment) directive places an obligation on all EU based

manufacturers and importers of Electrical and Electronic Equipment (EEE) to ensure waste equipment is disposed of

in accordance with the directive at the end of their useful life.

The symbol shown below will be placed on all products manufactured from 13th August 2005, which indicates this

product must NOT be disposed of with other normal waste. Upon purchasing any EEE from SEGA Amusements

International Ltd. The user accepts responsibility to dispose of their waste equipment by arranging to return it to a

designated UK collection point (AATF) or an Approved Exporter (AE) for the correct recycling of waste electrical

and electronic equipment.

For more information on Approved Authorised Treatment Facilities (AATF) within the UK please consult the

government website www.gov.uk

For users outside of the UK EEE should be disposed of in accordance with the local policy on the recycling of Waste

Electrical and Electronic Equipment.

The EC Directive on Batteries and Accumulators (2006/66/EC) aims to minimise the impact of batteries on

the environment and encourage the recovery of the materials they contain. To achieve increased collection and

recycling of waste batteries, the Directive places ‘producer responsibility’ obligations on manufacturers and

importers of portable, industrial and automotive batteries.

The symbol shown below will be on all equipment fitted with batteries from 26th September 2008 and indicates

they must NOT be disposed of with other normal waste. Instead, it is the user’s responsibility to dispose of used

batteries by arranging to return them to a designated collection point for the correct recycling.

For more information about where you can send your waste batteries for recycling contact your local authority

office.

REGISTERED IN ENGLAND REGISTERED NO. 1711515

REGISTERED OFFICE: BLOCK C 42 BARWELL BUSINESS PARK, CHESSINGTON, SURREY KT9 2NY

Waste of Electrical and Electronic Equipment (WEEE) Statement.

INTRODUCTION

DANGER

High voltage can cause

an electric shock.

Remove power before

servicing.

440-DS0010UK

WARNING

RISK OF SHOCK

Do Not Open!

Authorised Personnel

Only

440-WS0005UK

WARNING

RISK OF SHOCK

Do Not Open!

Authorised Personnel

Only

440-WS0005UK

Table ofContents

Gameplay

System settings

2.1

A Check Ledger 04

2.2

B Game Set 04

2.3

C Crane Set

2.4

D Advanced Set

2.5

E Sound Set

2.6

F System Reset

Error code

Simple problem elimination

Wiring instructions

Mainboard wiring position description

Intetiace description

'f'Gameplay

'("

fte

the

coin

has

satisfied

the

number

credits

required

game, start the game by operating the joystick.

'("

Operatethejoystickdirectiontocontrolthecranetoaimabove

your selected target and release the joystick. When you start to move

the joystick, the LCD screen will start to display the game time

countdown.

'(" When you press the Item button or the game time countdown is

over, the claw hook begins drop the claw.

If the game has the " Grab At Once" enabled, you can press the Get

Item button again to immediately perform claw closing in the air

before the claw hook reaches the bottom.

'("

After the claw reaches the top the claw stops

and then it moves towards the prize chute to release any item it has

caught

Indice

Altri manuali Sega Macchina per videogiochi arcade

Sega

Sega WaveRunner GP Manuale utente

Sega

Sega World Club Champion Football European Clubs... Manuale utente

Sega

Sega VIRTUA COP Manuale utente

Sega

Sega RALLY 3 DELUXE Manuale utente

Sega

Sega Daytona USA Manuale utente

Sega

Sega The House of the Dead 4 Manuale utente

Sega

Sega Rally 2 DX Manuale utente

Sega

Sega KO DRIVE Manuale utente

Sega

Sega ALL AIR TRIX DLX Manuale di riferimento

Sega

Sega Ghost Squad Manuale utente

Sega

Sega SHOOT THIS WIN THIS Manuale utente

Sega

Sega D2 Manuale di riferimento

Sega

Sega Buster Bubble Manuale utente

Sega

Sega Virtua Fighter 4 Evolution Guida alla risoluzione dei problemi

Sega

Sega 18 Wheeler Manuale utente

Sega

Sega MIB Manuale utente

Sega

Sega Let's Go ISLAND! Manuale utente

Sega

Sega SOUL SURFER Manuale utente

Sega

Sega Harley Davidson & L.A Riders Manuale utente

Sega

Sega Outrun 2 Supplemento

Sega

Sega Sonic Allstarts Kids Basketball Manuale utente

Sega

Sega Nascar Arcade Mini Standard Manuale utente

Sega

Sega Luigi's Mansion Arcade Guida all'applicazione

Sega

Sega ATV Slam Manuale utente

Manuali Macchina per videogiochi arcade popolari di altre marche

Universal Space

Universal Space COCONUT BASH Manuale utente

Bay-Tek

Bay-Tek EVOLVE Manuale utente

Global VR

Global VR America's Army Istruzioni per l'installazione e il funzionamento

Atronic

Atronic Cashline Manuale utente

Universal Space

Universal Space Checky Monkey Manuale utente

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manuale utente

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manuale utente

Family Fun Companies

Family Fun Companies Reactor Guida rapida

Universal Space

Universal Space FRUIT MANIA Extreme Manuale utente

falgas

falgas CARRUSEL FIESTA Manuale utente

Konami

Konami DanceDanceRevolution Manuale utente

Bay-Tek

Bay-Tek quik drop Manuale utente

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuale utente

Adrenaline

Adrenaline Flying Tickets Istruzioni per l'installazione e il funzionamento

Swinks

Swinks Stern Pinball Ghostbusters Manuale utente

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuale utente

jakar

jakar SPEED CARS Manuale utente

Carmelli

Carmelli HAT TRICK NG1015H Manuale utente