Sega Clay Challenge Manuale utente

BEFORE USING THE PRODUCT,

BE SURE TO READ THE FOLLOWING:

To maintain safety:

To ensure the safe operation of this product, be sure to read the following before usage.

The following instructions are intended for the users, operators and the personnel in charge of the

operation of the product. After carefully reading and sufficiently understanding the warning

displays and cautions, handle the product appropriately. Be sure to keep this manual close to the

product or in a convenient place for future reference.

Herein, explanations which require special attention are enclosed with dual lines. Depending on

the potentially hazardous degrees, the terms of DANGER, WARNING, CAUTION, etc. are used.

Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the

product by disregarding this

pictograph will cause severe

injury or death.

Indicates that mishandling the

product by disregarding this

warning will cause a potentially

hazardous situation which can

result in death or serious injury.

Indicates that mishandling the

product by disregarding this

caution will cause a slight

hazardous situation which can

result in personal injury and/or

material damage.

For the safe usage of the product, the following pictographs are used:

Indicates "HANDLE WITH CARE." In order to protect the human body and

equipment, this display is attached to places where the Owner's Manual, Serviceman

Manual and/or Service Manual should be referred to.

Indicates a "Protective Earth Terminal." Before operating the equipment, be sure to

connect it to the Ground.

(The step may be omitted for products in which a power cord with earth is used.)

❍Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention.

Failing to perform work as per the instructions can cause accidents. In the case where only

those who have technical expertise should perform the work to avoid hazardous situation, the

instructions herein state that the site maintenance personnel should perform such work.

❍Be sure to turn off the power before working on the machine.

To prevent an electric shock, be sure to turn off the power before carrying out any work that

requires direct contact with the interior of the product. If the work is to be performed in the

power-on status, the Instruction Manual herein always states to that effect.

❍Be sure to ground the Earth Terminal.

(This is not required in the case where a power cord with earth is used.)

This product is equipped with the Earth Terminal. When installing the product, connect the

Earth Terminal to the "accurately grounded indoor earth terminal" by using an earth wire.

Unless the product is grounded appropriately, the user can be subject to an electric shock.

After performing repair, etc. for the control equipment, ensure that the Earth Wire is firmly

connected to the control equipment.

❍Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is

not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.

❍Be sure to use fuses which meet the specified rating.

(Only for the machines which use fuses.)

Using fuses exceeding the specified rating can cause a fire and an electric shock.

❍Specification changes (removal of equipment, conversion and addition) not

designated by SEGA are not allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc.

It is very hazardous to operate the product by removing parts and/or modifying the circuits.

Should doors, lids and protective parts be damaged or lost, refrain from operating the product,

and contact where the product was purchased from or the office herein stated.

SEGA shall not be held responsible for any accidents, compensation for damage to a third

party, resulting from the specifications not designated by SEGA.

❍Ensure that the product meets the requirements of appropriate Electrical

Specifications.

Before installing the product, check for Electrical Specifications. SEGA products have a

nameplate on which Electrical Specifications are described. Ensure that the product is

compatible with the power supply voltage and frequency requirements of the location. Using

any Electrical Specifications different from the designated Specifications can cause a fire and

an electric shock.

❍Install and operate the product in places where appropriate lighting is

available, allowing warning labels to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially

hazardous situations are applied to places where accidents can be caused. Ensure that where

the product is operated has sufficient lighting allowing the warnings to be read. If any label is

peeled off, apply it again immediately. Please place an order with where the product was

purchased from or the office herein stated.

❍When handling the monitor, be very careful.

(Applies only to the product with a monitor.)

Some of the monitor (TV) parts are subject to high tension voltage. Even after turning off the

power, some portions are still subject to high tension voltage sometimes. Monitor repair and

replacement should be performed only by those technical personnel who have knowledge of

electricity and technical expertise.

❍Be sure to adjust the monitor/projector properly.

(Applies only to the product with a monitor/projector.)

Do not operate the product leaving on-screen flickering or blurring as it is. Using the product

with the monitor/projector not properly adjusted may cause dizziness or a headache to an

operator, a player, or the customers.

❍When transporting or reselling this product, be sure to attach this manual to

the product.

In the case where commercially available monitors and printers are used in this product, only

the contents relating to this product are explained herein. Some commercially available

equipment has functions and reactions not stated in this manual. Read this manual together

with the specific Instruction Manual of such equipment.

* Descriptions herein contained may be subject to improvement changes without notice.

* The contents described herein are fully prepared with due care. However, should any

question arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately

after transporting to the location. Nevertheless, an irregular situation may occur during

transportation. Before turning on the power, check the following points to ensure that the product

has been transported in a satisfactory status.

❐Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

❐Are Casters and Adjusters damaged?

❐Do the power supply voltage and frequency requirements meet with those of the location?

❐Are all wiring connectors correctly and securely connected? Unless connected in the correct

way, connector connections can not be made accurately. Do not insert connectors forcibly.

❐Do power cords have cuts and dents?

❐Do the fuses used meet specified ratings? Is the Circuit Protector in an energized status?

❐Are all accessories available?

❐Can all Doors and Lids be opened with the Accessory Keys? Can Doors and Lids be firmly

closed?

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

TABLE OF CONTENTS ....................................................................................... i

INTRODUCTION................................................................................................ iv

11HANDLING PRECAUTIONS ......................................................................... 1

22PRECAUTIONS REGARDING INSTALLATION LOCATION........................ 3

2-1 LIMITATIONS OF USAGE ................................................................................................4

33PRECAUTIONS REGARDING PRODUCT OPERATION ............................. 4

44PART DESCRIPTIONS.................................................................................. 6

8 5ACCESSORIES ............................................................................................. 8

66ASSSEMBLY AND INSTALLATION.............................................................. 9

6-1 INSTALLATION ..............................................................................................................11

6-2 TURNING ON THE POWER (SOFTWARE INSTALLATION) ........................................13

6-3 CHECKING ASSEMBLY (SETUP) .................................................................................14

7 PRECAUTIONS WHEN MOVING THE MACHINE...................................................16

88GAME DESCRIPTION ...........................................................................................................17

8-1 GAME OUTLINE.............................................................................................................17

8-2 GAME MODE..................................................................................................................18

8-3 BONUS SHOTS..............................................................................................................19

8-4 NUMBER OF PLAYERS.................................................................................................20

8-5 GAME FLOW..................................................................................................................21

TABLE OF CONTENTS

99SYSTEM MENU ........................................................................................... 22

9-1 SWITCH UNIT AND COIN METER ................................................................................23

9-2 SYSTEM MENU..............................................................................................................24

9-3 TEST MODE ...................................................................................................................25

9-4 CONFIGURATION ..........................................................................................................31

9-5 BOOKKEEPING .............................................................................................................36

9-6 BACKUP CLEAR ...........................................................................................................39

10 PERIODIC INSPECTION ............................................................................. 42

11 TROUBLESHOOTING................................................................................. 43

11-1 TROUBLESHOOTING (WHEN NO ERROR MESSAGE IS SHOWN).........................43

11-2 ERROR MESSAGES ....................................................................................................44

12 GAME BOARD ............................................................................................ 45

13 CABINET PARTS DESCRIPTION ............................................................... 51

14 PARTS LIST, CONTROLLER ...................................................................... 52

15 WIRE COLOR CODE TABLE...................................................................... 53

16 WIRING DIAGRAM ...................................................................................... 54

17 LINCENSE MARK........................................................................................ 57

INTRODUCTION

iii

INTRODUCTION

This manual is intended to provide detailed descriptions together with all the necessary information covering the

general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,

“SEGA CLAY SHOOTING, CVT KIT”.

This manual is intended for the owners, personnel and managers in charge of operation of the product.

Operate the product after carefully reading and sufciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the ofce listed below or the point of purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the word “IMPORTANT” and the symbol below.

Sega Amusements U.S.A., Inc.

800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A.

TEL: 1-847-364-9787

TOLL FREE: 1-888-877-2669

FAX: 1-847-427-1065

Indicates important information that, if ignored, may result in the mishandling of

the product and cause faulty operation or damage to the product.

INTRODUCTION

Denition of 'Site Maintenance Personnel or Other Qualied Individuals'

Procedures not described in this manual or marked as 'to be carried out by site

maintenance personnel or other qualied professionals' should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialized knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

HANDLING PRECAUTIONS

• Beforeperformingwork,besuretoturnthepoweroff.Performingthework

withoutturningthepoweroffcancauseanelectricshockorshortcircuit.Inthe

caseworkshouldbeperformedinthestatusofpoweron,thismanualalways

statestothateffect.

• Toavoidanelectricshockorshortcircuit,donotpluginorunplugquickly.

• Toavoidanelectricshock,donotpluginorunplugwithawethand.

• Donotexposepowercordsorearthwiresonthesurface,(oor,passage,etc.).If

exposed,thepowercordsandearthwiresaresusceptibletodamage.Damaged

cordsandwirescancauseanelectricshockorshortcircuit.

• Toavoidcausingareoranelectricshock,donotputthingsonordamagethe

powercords.

• Whenorafterinstallingtheproduct,donotunnecessarilypullthepowercord.If

damaged,thepowercordcancauseareoranelectricshock.

• Incasethepowercordisdamaged,askforareplacementthroughwherethe

productwaspurchasedfromortheofcehereinstated.Usingthecordasis

damagedcancausere,anelectricshockorleakage.

• Besuretoperformgroundingappropriately.Inappropriategroundingcancause

anelectricshock.

• Besuretousefusesmeetingthespeciedrating.Usingfusesotherthanthe

speciedratingcancauseareoranelectricshock.

• BesurethatconnectionssuchasICBDaremadeproperly.Insufcientinsertion

cancauseanelectricshock.

• Specicationchanges,removalofequipment,conversionand/oraddition,not

designatedbySEGAarenotpermitted.

-Failuretoobservethismaycauseareoranelectricshock.Non-compliance

withthisinstructioncanhaveabadinuenceuponphysicalconditionsofthe

playersortheonlookers,orresultininjuryduringplay.

-SEGAshallnotbeheldresponsiblefordamage,compensationfordamagetoa

thirdparty,causedbyspecicationchangesnotdesignatedbySEGA.

• Donotperformanyworkorchangepartsnotlistedinthismanual.Doingsomay

leadtoanaccident.

 Ifyouneedtoperformanyworknotlistedinthismanual,requestworkfromthe

ofceindicatedinthismanualorthepointofpurchase,orinquiresfordetails.

• Besuretoperformperiodicmaintenanceinspectionshereinstated.

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that

the player can enjoy the game safely.

Non-compliance with the following points or inappropriate handling running counter to the cautionary matters

herein stated can cause personal injury or damage to the machine.

HANDLING PRECAUTIONS

• FortheICboardcircuitinspections,onlythelogictesterisallowed.Theuseofa

multiple-purposetesterisnotpermitted,sobecarefulinthisregard.

• WhencleaningtheCRTsurfaces,useasoftanddrycloth.Donotapply

chemicalssuchasthinner,benzene,etc.

• StaticelectricityfromyourbodymaydamagesomeelectronicsdevicesontheIC

board.BeforehandlingtheICboard,touchagroundedmetallicsurfacesothat

thestaticelectricitycanbedischarged.

• Somepartsarenotdesignedandmanufacturedspecicallyforthisgame

machine.Themanufacturersmaydiscontinue,orchangethespecicationsof

suchgeneral-purposeparts.Ifthisisthecase,SEGAcannotrepairorreplacea

failedgamemachinewhetherornotawarrantyperiodhasexpired.

Indice

Altri manuali Sega Macchina per videogiochi arcade

Sega

Sega BG-X005SGA Manuale utente

Sega

Sega NAOMI Manuale utente

Sega

Sega KO DRIVE Manuale utente

Sega

Sega Capcom vs SNK 2 Guida alla risoluzione dei problemi

Sega

Sega Virtua Cop 3 Manuale utente

Sega

Sega The Maze of the Kings Manuale utente

Sega

Sega WaveRunner GP Manuale utente

Sega

Sega Snakes & Ladders Manuale utente

Sega

Sega Cows Might Fly Manuale utente

Sega

Sega MINI DELUXE THE HOUSE OF THE DEAD 4 Manuale utente

Sega

Sega DRONE RACING GENESIS Manuale utente

Sega

Sega Showdown Manuale utente

Sega

Sega OUTRUN 2 SPECIAL TOURS SDX Manuale utente

Sega

Sega MISSION: IMPOSSIBLE Manuale utente

Sega

Sega OutRun2SP Manuale utente

Sega

Sega SEGA-RaceTV Manuale utente

Sega

Sega ATV Slam Manuale utente

Sega

Sega ALL AIR TRIX DLX Manuale di riferimento

Sega

Sega The House of the Dead 4 Manuale utente

Sega

Sega Derby Owners Club World Edition Manuale utente

Sega

Sega Crazy Taxi Manuale utente

Sega

Sega Derby Owners Club World Edition Istruzioni operative originali

Sega

Sega Olle King Manuale utente

Sega

Sega THE HOUSE OF THE DEAD III DELUXE Manuale utente

Manuali Macchina per videogiochi arcade popolari di altre marche

Universal Space

Universal Space COCONUT BASH Manuale utente

Bay-Tek

Bay-Tek EVOLVE Manuale utente

Global VR

Global VR America's Army Istruzioni per l'installazione e il funzionamento

Atronic

Atronic Cashline Manuale utente

Universal Space

Universal Space Checky Monkey Manuale utente

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manuale utente

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manuale utente

Family Fun Companies

Family Fun Companies Reactor Guida rapida

Universal Space

Universal Space FRUIT MANIA Extreme Manuale utente

falgas

falgas CARRUSEL FIESTA Manuale utente

Konami

Konami DanceDanceRevolution Manuale utente

Bay-Tek

Bay-Tek quik drop Manuale utente

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuale utente

Adrenaline

Adrenaline Flying Tickets Istruzioni per l'installazione e il funzionamento

Swinks

Swinks Stern Pinball Ghostbusters Manuale utente

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuale utente

jakar

jakar SPEED CARS Manuale utente

Carmelli

Carmelli HAT TRICK NG1015H Manuale utente