
Introduction
The TM-L60II and TM-L60IIP are compact, easy-to-use printers that can be
employed in the following applications.
❏As a one-station printer with an ECR or POS system
❏Output device for scaling or measuring
❏As a ticket issuing device
The TM-L60II and TM-L60IIP have the following features:
❏Compact, lightweight configuration
❏High-speed printing of 12 lines/second
❏Low-noise thermal printing
❏Durable design for high reliability
❏Easy maintenance and head cleaning
❏ESC/POS®standard command protocol
❏Routing of interface cable, drawer control cable, and power cable in any
direction: sides, underneath, back
❏Repeated operation and copy printing are possible by using macro definitions
❏Built-in interface for 2-drawer control
❏Print and eject label command reduces paper waste
❏Characters can be scaled up to 64 times as large as the standard size. Smoothing
is also possible
❏Bar code printing is possible by using a bar code command. Bar codes can be
printed both in the vertical direction (fence bar code) and in the horizontal
direction (ladder bar code) (effective in page mode)
❏Various layouts are possible by using page mode
❏Serial number printing on label paper
❏Water-resistant control panel
❏Command selection of font sizes (12 x 24, 9 x 24)
❏Four different print densities can be selected by DIP switches
❏Bidirectional parallel interface in accordance with the IEEE 1284 Nibble/Byte
Modes (TM-60IIP)
Please be sure to read the instructions in this manual carefully before using your new
EPSON printer.