Sekonic SR-430 Manuale utente

Operating manual

C43497510-00

OPTICAL

MARK READER

OPTICAL

MARK READER

SR-430

Operating manual

Head Office : 7-24-14, Oizumi-Gakuen-cho, Nerima-ku, Tokyo 178-8686, Japan

Telephone : (03)3978-2335 Fax : (03)3978-5229

Introduction

Thank you very much for purchasing our product.

Before using this product, be sure to thoroughly read this manual so that you can use it properly.

Notice

Microsoft Visual Basic is a registered trademark of Microsoft Corporation.

This product must not be reproduced or modified without permission from SEKONIC.

Introduction

6. CD-ROM

Warranty

This product will be warranted without any charge for one year after delivery.

In case of a failure occurring during this period, we repair it for free if it is judged to be related to our

responsibility. In this case, we temporarily keep the failed product to repair it. For details, contact the

shop at which you have purchased it.

In case that the free warranty period has expired or the failure is related to your responsibility or has

resulted from a worn part, we will repair it with charge.

The scope of this warranty is limited to this product and its accessories. Note that SEKONIC will not be

responsible for any financial damage, lost profit or claim from a third party resulting from operation of

this product.

Warranty

Safety Precautions

This "Safety Precautions" page lists various symbols for ensuring safety operation of this product so as to

prevent users, other people or properties from being damaged.

Thoroughly read these precautions and understand the meanings of the symbols before proceeding to the

main text of this manual.

Warning

Improper operation by neglecting this instruction may result in death or serious

injury.

Caution

Improper operation by neglecting this instruction may result in personal or property

damage.

Safety Precautions

Instructs that the part must be grounded for safety operation.

Neglecting this instruction may generate smoke or a fire.

Neglecting this instruction may cause an electric shock.

Indicates a prohibited action.

Indicates that disassembly or modification is prohibited.

Instructs that the power code must be removed from the outlet for safety opera-

tion.

Warning

●A fire or an electric shock may result if this product continues to be used with

strange smell or sound.

In this case, immediately turn the power switch off and then remove the power

code from the outlet. After making sure that smoke generation has stopped,

ask the sales shop for repair.

Never attempt to repair by yourself since it may cause serious danger.

●If a foreign matter should enter inside, immediately turn the power switch off

and remove the power code from the outlet. Then, contact the sales shop.

If the device continues to be used with a foreign matter inside, a fire or an

electric shock may occur.

If water or other foreign matter should enter inside, immediately turn the power

switch off and remove the power code from the outlet. Then, contact the sales

shop. If the device continues to be used with water or other foreign matter

inside, a fire or an electric shock may occur.

●If the device should be dropped or the cover broken, immediately turn the power

switch off and remove the power code from the outlet. Then, contact the sales

shop.

●Do not cover the vent hole. Otherwise, heat is contained inside, resulting in a

fire.

●Precautions on device

•Do not use it with other supply voltage than the specified one.

•Do not install it in a place subject to liquid like water or oil, steam, moisture or

dust.

•Do not insert or drop any metal, foreign matter like combustibles, etc from the

port.

•Do not place a container with chemicals or water or a small metal piece near

the device.

●Do not modify or disassemble this device. Otherwise, it may cause a fire or an

electric shock.

●Do not remove the cover from this device. Otherwise, it may cause an electric

shock. Ask the sales shop for internal check, adjustment or repair.

Pay enough attention to the above instructions. Otherwise, a fire or an electric

shock may occur.

Warning

Caution

●When connecting or disconnecting the ground cable, be sure to remove the

power code from the outlet. Otherwise, an electric shock may occur.

●Be sure to ground the main unit with a ground cable. Otherwise, an electric

shock may occur.

●Do not place the device in an unstable location. Otherwise, it may fall, resulting

in an injury.

●When opening or closing the upper part of the main unit, do not place your hand

on the paper feeding surface. Otherwise, the finger may be caught, resulting in

an injury.

●When placing your hand on the paper feeding surface of the main unit, be

careful not to allow your finger to be caught or hit.

●When maintaining the device, be sure to remove the power code from the outlet

for your safety.

●When the device is not in use for long periods, remove the power code from the

outlet for safety.

●Before moving the device, be sure to remove the power code from the outlet.

If the cable is damaged, a fire or an electric shock may result.

●Do not connect or disconnect the power code or connection plug with a wet

hand.

Otherwise, a fire or an electric shock may result.

●Do not put a heavy substance on the device.

Otherwise, it may fall, resulting in an injury.

Caution

Table of Contents

1. Precautions on Usage ......................................................................................................... 1

2. Names of Each Part ........................................................................................................... 2

3. Specifications ..................................................................................................................... 5

4. Installing the USB Driver .................................................................................................. 6

4-A Before installation ..................................................................................................... 6

4-B Installation Procedure ................................................................................................ 7

4-C Checking the Assigned port .................................................................................... 10

4-D Troubleshooting for Communication Errors ........................................................... 11

4-E Uninstall Procedure ................................................................................................. 12

5. Operation ......................................................................................................................... 13

5-A Preparation .............................................................................................................. 13

5-B Functions and Operating Method of Operation Panel ............................................. 14

5-C Setting Cards ........................................................................................................... 15

5-D Power Connection and Operation Test .................................................................... 19

5-E Test Mode ................................................................................................................ 19

5-F Troubleshooting ....................................................................................................... 20

6. Connection to Computer .................................................................................................. 22

7. How to Enter Mark .......................................................................................................... 23

8. Adjusting Reading Sensitivity ......................................................................................... 24

9. Control Commands .......................................................................................................... 27

9-A Initialize Commands ............................................................................................... 27

9-B Card Feed Commands ............................................................................................. 37

9-C Device Control Setting Commands ......................................................................... 38

10. Data Transfer Mode ......................................................................................................... 39

10-A Data Transfer Commands ..................................................................................... 39

10-B A Mode (1-byte Fixed Output Command) ........................................................... 40

10-C C Mode(Fixed Length Output Command) ........................................................... 41

10-D CA Mode(Fixed Length Output Command for Automatic Density Distinction) . 42

10-E E Mode(Variable Length Output Command) ....................................................... 43

10-F EA Mode(Variable Length Output Command for Automatic Density Distinction) ... 44

10-G ED Mode(Variable Length Output Command with Density Data) ...................... 45

10-H ES Mode(Variable Length Output Command by Density and Mark Data) ......... 46

10-I G Mode(EBCDIC Code Convert and Output Command) ................................... 47

10-J B Mode ................................................................................................................. 48

10-K D Mode ................................................................................................................. 48

10-L F Mode ................................................................................................................. 48

10-M Other Commands ................................................................................................. 49

10-N SR-305 Compatible Command ............................................................................ 52

11. Cleaning and Time of change of parts ............................................................................. 53

Table of Contents

12. External Views ................................................................................................................. 55

13. Appendix ......................................................................................................................... 56

13-A Reference for card creation .................................................................................. 56

13-B Code Tables .......................................................................................................... 62

13-C Typical sample program ....................................................................................... 64

13-D Check card ............................................................................................................ 67

-1-

1. Precautions on Usage

Handle the device with the following in mind so as to enable the functions of it to be fully utilized.

(1) Before usage, make sure that the power connector is firmly connected to an outlet. Avoid connecting

or disconnecting the connector during operation or while the power switch is turned on.

(It may result in a failure.)

(2) Since the card reading part is equipped with an optical lens, never insert a screwdriver or the like.

(Otherwise, reading may be disabled.)

If card feeding is disabled due to clogged dust or the like in the card feeder, open the top cover to

remove it. (Refer to "11. Cleaning".)

(3) Allow an interval of at least 5 seconds between turning the power switch on and off.

(Otherwise, a failure may result.)

(4) Be sure to ground the device so as to prevent noise or static electricity from damaging the device.

Also, do not touch the metallic part of the device during card feeding operation.

If the device is used without being grounded or the metallic part is touched, malfunction or an elec-

tric shock may result.

(5) Do not place the device in a place subject to direct sunlight or near a heater. Also be careful not to

allow sudden temperature change, moisture, dust or excessive shock around the device.

(Otherwise, a failure like wrong paper feeding, reading or operation may occur.)

(6) When the device is not in use for long periods, insert the paper feeding roller protection card between

the paper feeding roller and the separation pad to prevent the roller material from deteriorating.

(7) If the paper feeding roller becomes soiled with powder from card paper or pencil, the roller and the

card may slip.

In order to prevent it, clean the paper feeding roller at proper intervals. (Refer to "11. Cleaning".)

(8) If the exterior of the device is soiled, slightly wipes with soft cloth wetted with water or neutral

detergent. Note that wiping with cloth wetted with volatile chemicals like benzine or thinner may

cause deforming or decoloring.

1.Precautions on Usage

Indice

Altri manuali Sekonic Lettore di codici a barre

Sekonic

Sekonic SR-6500 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente