8
3 Installation
Installation of a Seldén Winch must be carried out by a competent installer
who has read and understood this installation manual, the purpose and
function of the winch and has checked the loads, winch sizing and mounting
requirements prior to installation.
Winch orientation, position relative to associated components and location
regarding deck reinforcement and suitability must be checked and any reinforce-
ment work carried out prior to installation. The installer takes full responsibility to
ensure these checks have been undertaken. This may require the assistance of a
boatyardorcertiedmarineengineers.
Seldén Mast does not provide fasteners. The installer is responsible for the sour-
cing and specifying load capacity of the fasteners, ensuring they are rated for the
expected loads from the winch. Any fastener should be made from marine grade
stainless steel.
Seldén Mast AB does not take responsibility for the incorrect installation of a
winch,theinsucientreinforcementofthedeckatthelocationofthewinch,
wateringressduetoinsucientsealingoranydamagetointeriorasaresultof
water ingress.
S30 5 pcs Countersunk M6 screws
S40 4 pcs Countersunk M8 screws
S46/S52 5 pcs Countersunk M8 screws
S60/S66 5 pcs Countersunk M10 screws
Fastener recommendations:
