Seltron GWD1 Guida
ENG
Wi-Fi communication module GWD1
Instructions for use
and setting of the module
Instructions for installation
3
VSEBINA
Introduction............................................................................................................................4
INSTRUCTIONS FOR USE AND SETTING OF THE MODULE
GWD1 module description.....................................................................................................5
SeltronHome platform description .........................................................................................6
Setup communication module GWD1 ...................................................................................6
Setup connection with the controller......................................................................................6
Download mobile appliaction Clausius..................................................................................7
Create an account in Clausius ..............................................................................................7
Register GWD1 on your user account...................................................................................8
Connect GWD1 to a Wi-Fi network .......................................................................................9
Method A: Connect GWD1 to a Wi-Fi network with WPS button .................................9
Method B: Connect GWD1 to a Wi-Fi network with Clausius application ....................9
GWD1 connection with SeltronHome cloud service............................................................11
INSTRUCTIONS FOR INSTALLATION
GWD1 installation................................................................................................................12
GWD1 electrical connection ................................................................................................12
Supply voltage connection...................................................................................................13
Connection with a heating controller ...................................................................................13
TROUBLESHOOTING, TECHNICAL DATA, STATEMENTS
GWD1 factory reset.............................................................................................................14
Troubleshooting...................................................................................................................14
Technical data......................................................................................................................17
Declaration of conformity.....................................................................................................18
Disposal of old electrical and electronic equipment.............................................................18
Notes ..........................................................................................................................19
4
Introduction
Wi-Fi communication modules GWD1 are advanced microprocessor-driven devices.
They are made with digital and SMT technology, intended for remote access to Seltron
heating controllers with Clausius application.
5
Instructions for use and settings
1 - WPS button for automatic connection with a wireless Wi-Fi network.
2 - Registration key of the GWD1 device.
3 - Signal light for the indication of connection to a Wi-Fi network.
4 - Signal light for the indication of connection to a cloud service.
5 - Signal light for the indication of connection to a Seltron heating controller.
Meaning of signal lights:
INSTRUCTIONS FOR USE AND SETTING OF THE MODULE
GWD1 module description
- signal light lights up in orange - connection is not established
- signal light ashes orange - connecting
- signal light lights up in green - connection is established
Occasional fast orange ashing, while the signal light lights in green, indicates
communication, namely data transfer.
2 3 45
1
6
Instructions for use and settings
Upon connection to the controller, the signal light for the
controller starts to ash orange.
Once the connection to the controller is established, signal light
for the controller will light green.
SeltronHome platform description
Setup connection with the controller
Upon connection to the supply voltage (at rst start or after a
reset), the WPS button will light green and all signal lights will
light orange.
Communication module GWD1 is connected to the heating controller via a wire (BUS)
connection. The GWD1 connects in to the internet via the Wi-Fi router, through which it
communicates with the SeltronHome cloud services.
SeltronHome service is a link between the communication with the mobile app Clausius.
Clausius sends commands and data, obtained through SeltronHome services.
Before you start using the communication module GWD1 it is necessary:
- to mount the module on the wall,
- connect it to a Seltron controller,
- connect it to a supply voltage.
You can nd technical instructions on pages 12 and 13.
Electrical connection of the device must be carried out by a qualied installer or
authorized organization.
Setup communication module GWD1
Seltron
Controller
Communication
Gateway GWD1
BUS
Connection
Wi-Fi Router
SeltronHome
Cloud
Clausius
App
If a connection with the controller can't be established please visit
www.seltronhome.com and check if your controller is supported.
7
Instructions for use and settings
Download the Clausius mobile application
Mobile application Clausius is used for the heating management and the connection of
communication module GWD1 to the Internet.
The application can be used also on personal computers, laptops or unsupported smartphones
via a web browser. To register and login in to the application in a web browser you must visit
the web address https://clausius.seltronhome.com
For the devices with Android operating system you can nd
the application on Google Play. For the iOS devices you can
nd it on the App Store.
To nd the application, write »SeltronHome« or »Clausius«
into search engine eld on Google Play or App Store. Applica-
tion icon is illustrated on the right.
After the installation start the Clausius application.
You can install Clausius application on smart devices with Android operating system 4.4 or
higher and on iOS devices with operating system verison 7.1 or higher.
Create an account in Clausius
To use the application you must rst create the user account in
the SeltronHome service.
For the registration you can use a valid and active Facebook
or Google user account. In the registration procedure you will
enter your user name and password, which you use in these
services.
For the registration you can use also any other e-mail address
that you possess. In this case you will have to enter a pas-
sword, which you will use along with your e-mail address to
login to SeltronHome Clausius application.
After the registration you will receive an e-mail with a web link,
trough which you will conrm your e-mail address.
In the case that the Google and Facebook login page doesn't
apear, check, if your web browser dosen't block the pop-up
windows.
Applicaton Icon
Choose an option »Create new acco-
unt« and ll out the data
8
Instructions for use and settings
Register GWD1 on your user account
1) Upon the rst logging into the application, on the welcome screen choose the option
»ADD YOUR NEW DEVICE AS OWNER«.
2) In the window for devices adding, enter the registration key of the GWD1 device and
select »CHECK«.
3) Application checks and conrms if the registration key is correct. You have to repeat the
process if you made a typing mistake.
4) In the window for building adding, you will enter the data for the building (apartment,
house, company, street,...) in which the GWD is installed and select »CONTINUE«.
Each GWD1 device has a unique registration key, which is printed on the front of the housing.
1) Tap the button »ADD YOUR
NEW DEVICE AS OWNER«
2) Enter your registration key of
the GWD1
3) The application noties
you about properly inserted
registration key
4) Fill out the data of your
building.
The application checks the sta-
tus of the GWD1 connection
If the GWD1 is ofine, on
pop-window choose option
»INSTRUCTIONS«
After successful registration, connect the
GWD1 into a wireless Wi-Fi network.
you can use the button WPS on the
wireless router and on GWD1;
you can use the application Seltron-
Home Clausius on the smart phone,
tablet PC or other PC;
You can connect the GWD1 to your home
Wi-Fi network in two ways:
A:
B:
9
Instructions for use and settings
Method A: Connect GWD1 to a Wi-Fi network with WPS button
If your Wi-Fi router is equipped with a WPS button (Wi-Fi Protected Setup), the wireless
Wi-Fi connection can been set up easy, via this button.
After a few seconds, the WPS button is switched off and a
wireless Wi-Fi connection starts establishing, which is indicated
by orange ashing Wi-Fi signal light .
On the GWD1 press the WPS button , which will start to
ash green. Within two minutes press the WPS button on your
Wi-Fi router as well
Once the wireless Wi-Fi connection to the Wi-Fi router is esta-
blished, the Wi-Fi signal light is lightning green.
The WPS button on the wireless router, can be found under different names and acronyms.
Some examples: QSS, QuickSetup, Push'n'Connect etc. If you don't nd the WPS button
on your wireless router, please check the instructions that came with your wireless router.
Connecting procedure
Method B: Connect GWD1 to a Wi-Fi network with Clausius application
At the rst start or after reset the GWD1 is congured as an access point (an open network).
This makes it possible for you to connect to GWD1 and complete its setup.
Among the available networks, nd and select the network
»GWD1-XX«. »XX« indicates the registration key's rst
two characters.
Your smart device or computer is now connected to the
GWD1.
Close the Wi-Fi settings, and return to the application
SeltronHome Clausius.
First leave the application and on your smart device
open the settings for Wi-Fi networks.
For the connection to GWD1 in the Wi-Fi set-
tings choose Wi-Fi Network GWD1-XXXXXX
Connect GWD1 to a Wi-Fi network
10
Instructions for use and settings
When the conguration is complete, the WPS button turns off,
ahd establishing of wireless Wi-Fi connections starts, which is
signaled with an orange ashing warning Wi-Fi light .
When the wireless connection is established with theWi-Fi rou-
ter, the signal Wi-Fi light lights green.
1. The application detects the
device
2. Choose your home Wi-Fi
network from the list
3. Enter the Wi-Fi password, if
your network is secured with a
password
4. The application noties you
about completed conguration
Connecting procedure:
1. The application detects the GWD1 device. Tap »CONTINUE«.
2. Listed Wi-Fi networks, which are withing the GWD1 range. Select your home Wi-Fi
network.
3. If the Wi-Fi network is secured with a password, you need to enter it to have the access
to the selected network.
4. The application noties you about completed conguration. Tap »CONTINUE«.
If the application after a few seconds doesn't detect the communication module GWD1, turn
off the mobile data on your mobile device.
If the desired wireless network is not listed, select »REFRESH« and wait a few moments.
GWD1 currently supports DHCP access.
If after completed conguration your mobile device or computer doesn't automatically establi-
sh an internet connection, manually switch back to your home wireless Wi-Fi network.
Condition of the signal lights on theGWD1 while connecting to Wi-Fi network
Indice
Altri manuali Seltron Router wireless
