Seltron GWD2 Guida

ENG

Wi-Fi communication module GWD2

Instructions for use and setting of the module

Instructions for installation

TABLE OF CONTENTS

Introduction............................................................................................................................4

INSTRUCTIONS FOR USE AND SETTING OF THE MODULE

GWD module description.......................................................................................................5

SeltronHome platform description .........................................................................................6

Setup communication module GWD .....................................................................................6

Setup connection with the controller......................................................................................6

Download the Clausius mobile application............................................................................7

Create an account in Clausius ..............................................................................................7

Connect GWD to a Wi-Fi network .........................................................................................8

Method A: Connect GWD to a Wi-Fi network with a Clausius app...............................9

Method B: Connect GWD to a Wi-Fi network with WPS button .................................10

GWD connection with SeltronHome cloud service..............................................................11

INSTRUCTIONS FOR INSTALLATION

GWD installation..................................................................................................................12

GWD electrical connection ..................................................................................................12

Supply voltage connection...................................................................................................13

Connection with a heating controller ...................................................................................13

COM fastener numbers on the controller ...................................................................14

Minimum controller supported versions......................................................................14

TROUBLESHOOTING, TECHNICAL DATA, STATEMENTS

GWD factory reset...............................................................................................................15

Troubleshooting...................................................................................................................15

Technical data......................................................................................................................17

Declaration of conformity.....................................................................................................18

Disposal of old electrical and electronic equipment.............................................................18

Notes ...................................................................................................................................19

INTRODUCTION

Wi-Fi communication modules GWD are advanced microprocessor-driven devices.

They are made with digital and SMT technology, intended for remote access to Seltron

heating controllers with Clausius application.

You can connect up to 2 controllers to a GWD2 communication module.

Instructions for use and settings

1 - WPS button for automatic connection with a wireless Wi-Fi network.

2 - Registration key of the GWD device.

3 - Signal light for the indication of connection to a Wi-Fi network.

4 - Signal light for the indication of connection to a cloud service.

5 - Signal light for the indication of connection to a rst Seltron heating controller.

6 - Signal light for the indication of connection to a second Seltron heating controller.

Meaning of signal lights:

INSTRUCTIONS FOR USE AND SETTING OF THE MODULE

GWD MODULE DESCRIPTION

- signal light lights up in orange - connection is not established

- signal light ashes orange - connecting

- signal light lights up in green - connection is established

Occasional fast orange ashing, while the signal light lights in green, indicates

communication, namely data transfer.

2 3 56

Instructions for use and settings

Upon connection to the controller, the signal light for the

controller starts to ash orange.

Once the connection to the controller is established, signal light

for the controller will light green.

SELTRONHOME PLATFORM DESCRIPTION

SETUP CONNECTION WITH THE CONTROLLER

Upon connection to the supply voltage (at rst start or after a

reset), the WPS button will light green and all signal lights will

light orange.

Communication module GWD is connected to the heating controller via a wire (BUS) con-

nection. The GWD connects in to the internet via the Wi-Fi router, through which it com-

municates with the SeltronHome cloud services. SeltronHome service is a link between

the communication with the mobile app Clausius. Clausius sends commands and data,

obtained through SeltronHome services.

Before you start using the communication module GWD it is necessary:

- to mount the module on the wall,

- connect it to a Seltron controller,

- connect it to a supply voltage.

You can nd technical instructions on pages 12 and 13.

Electrical connection of the device must be carried out by a qualied installer or

authorized organization.

SETUP COMMUNICATION MODULE GWD

Instructions for use and settings

DOWNLOAD THE CLAUSIUS MOBILE APPLICATION

Mobile application Clausius is used for the heating manage-

ment and the connection of communication module GWD to

the Internet.

For the devices with Android operating system you can nd the

application on Google Play Store. For the iOS devices you

can nd it on the App Store.

To nd the application, write »SeltronHome Clausius« into

search engine eld on Google Play or App Store. Application

icon is illustrated on the right.

The application can be used also on personal computers, laptops or unsupported smartphones

via a web browser. To register and login in to the application in a web browser you must visit

the web address https://clausius.seltronhome.com

You can install Clausius application on smart devices with Android operating system 4.4 or

higher and on iOS devices with operating system verison 7.1 or higher.

CREATE AN ACCOUNT IN CLAUSIUS

After the installation start the Clausius application.

To use the application you must rst create the user account in the SeltronHome service.

To register you can use your valid e-mail address. In this case you will have to enter a

password, which you will use along with your e-mail address to login to the Clausius app.

After the registration you will receive an e-mail with a web link, trough which you will con-

rm your e-mail address.

You can also use a valid and active Facebook or Google user account. In the registration

process you will enter your user name and password, which you use in these services.

In case that a Google or Facebook login page

doesn't apear, check if your web browser

dosen't block the pop-up windows.

If you use an Android device also make sure

you have Google Chrome browser app

installed on your mobile device.

Applicaton Icon

1. Choose an option

»Create new account«

2. Fill in your login data

Instructions for use and settings

Upon the rst log in into the application, on the welcome screen (1.) choose the option

»ADD YOUR NEW DEVICE AS OWNER«.

In the window for adding a device (2.), enter the registration key of the GWD device and

select »CHECK«. Application then checks and conrms if the registration key is correct.

(3.)

In the window for adding a building (4.), you will enter the data for the building (apartment,

house, company, street,...) in which the GWD is installed and select »CONTINUE«.

Wi-Fi conguration with the Clausius app is supported only on mobile version of the app.

This function is not supported in the web version (in the browser).

Each GWD device has a unique registration key, which is printed on the front of the housing.

1. Tap the button »ADD YOUR

NEW DEVICE AS OWNER«

2. Enter your registration key

of the GWD

3. The application noties

you about properly inserted

registration key

4. Fill out the data of

your building.

CONNECT GWD TO A WI-FI NETWORK

y you can use the application SeltronHome Clausius on the smart phone,

tablet PC or other PC;

you can use the WPS function on the wireless router and on GWD;

You can connect the GWD to your home Wi-Fi network in two ways:

In case you previously already added a GWD to your account, go to Settings , choose

Buildings and devices and tap the »+« icon in the top right corner.

Instructions for use and settings

METHOD A: CONNECT GWD TO A WI-FI NETWORK WITH A CLAUSIUS APP

1. The application checks the

status of the GWD connection

2. If the GWD is ofine, on

pop-window choose option

»CONNECT«

After you registered your GWD, application checks if your GWD is connected to a Wi-Fi

network. Follow the instructions in the app:

5. Choose your home Wi-Fi

network from the list

6. Enter the Wi-Fi password, if

your network is secured with a

password

6. The application noties you

about completed conguration

If after completed conguration your mobile device or computer doesn't automatically establi-

sh an internet connection, manually switch back to your home wireless Wi-Fi network.

If the desired wireless network is not listed, select »REFRESH« and wait a few moments.

GWD currently supports DHCP access.

If the application after a few seconds doesn't detect the communication module GWD, turn off

the mobile data on your mobile device.

3. When Clausius nds your

GWD that is broadcasting an

open Wi-Fi network, tap the

button »Connect«.

4. Clausius noties you that

your mobile device has

successfully connected to a

GWD's Wi-Fi netowrk

Instructions for use and settings

When the conguration is complete, the WPS button turns off,

ahd establishing of wireless Wi-Fi connections starts, which is

signaled with an orange ashing warning Wi-Fi light .

When the wireless connection is established with theWi-Fi rou-

ter, the signal Wi-Fi light lights green.

If the connection is not established, the Wi-Fi signal light lights up in orange. Possible causes

are as follows:

1) you entered the wrong password. In this case repeat the procedure (on page 9);

2) signal between the wireless router and GWD is too weak. Try to establish a better signal

reception by moving the router or GWD;

3) On the router you need to enable dynamic allocation of the IP (DHCP). Please consult with

your Internet provider and check the instructions that came with your router.

Condition of the signal lights on theGWD while connecting to Wi-Fi network

METHOD B: CONNECT GWD TO A WI-FI NETWORK WITH WPS BUTTON

If your Wi-Fi router is equipped with a WPS button (Wi-Fi Protected Setup), the wireless

Wi-Fi connection can been set up easy, via this button.

After a few seconds, the WPS button is switched off and a

wireless Wi-Fi connection starts establishing, which is indicated

by orange ashing Wi-Fi signal light .

On the GWD press the WPS button , which will start to

ash green. Within two minutes press the WPS button on your

Wi-Fi router as well

Once the wireless Wi-Fi connection to the Wi-Fi router is esta-

blished, the Wi-Fi signal light is lightning green.

The WPS button on the wireless router, can be found under different names and acronyms.

Some examples: QSS, QuickSetup, Push'n'Connect etc. If you don't nd the WPS button on

your wireless router, please check the instructions that came with your wireless router.

Connecting procedure

Indice

Altri manuali Seltron Router wireless

Seltron

Seltron GWD1 Guida

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente