Sena Parani A10 Manuale utente

1.1.0

USER’S GUIDE

ENGLISH

Motorcycle Intercom

GETTING STARTED

Update this product for free with the latest

ﬁrmware to fully enjoy the new advanced

features built into this product. Visit parani.com

to see how to update your product.

PRODUCT FEATURES

Blast your favorite tunes, talk over the intercom

with your buddies, hear directions from your

GPS and more, all through your A10 Bluetooth®

headset. With built-in Bluetooth®capabilities,

HD Intercom, technology has never felt so

minimal or freeing.

Bluetooth

Integrated

Intercom up to 1 km (0.6 mi)*

Four-way Intercom

LCD Display

Firmware Upgradeable

*in open terrain

parani.com

TABLE OF CONTENTS

3 GETTING STARTED 10

3.1 Button 10

3.2 LCD Display 11

3.3 Charging the Headset 11

3.4 Powering On and Off 12

3.5 Adjusting the Volume 12

3.6 Downloadable Parani Software 12

3.6.1 Parani Device Manager 12

4 PAIRING YOUR HEADSET WITH

OTHER BLUETOOTH DEVICES 13

4.1 Phone Pairing 13

4.1.1 Initially Pairing the A10 13

4.1.2 Pairing When the A10 is Turned Off 14

4.1.3 Pairing When the A10 is Turned On 15

4.2 Second Mobile Phone Pairing 15

1 BEFORE STARTING 5

1.1 Package Contents 5

1.1.1 Wired Boom Microphone Type 5

1.1.2 Wired Microphone Type 6

2 INSTALLING THE HEADSET ON

YOUR HELMET 7

2.1 Using the Clamp 7

2.2 Using the Glued Surface Mounting

Adapter 7

2.3 Installing the Speakers 8

2.3.1 Wired Boom Microphone Type 8

2.3.2 Wired Microphone Type 9

8 GENERAL SETTINGS 24

8.1 Function Priority 24

8.2 Conﬁguration Menu 25

8.2.1 Assigning Speed Dial 26

8.2.2 Voice Prompt (Default: Enable) 27

8.2.3 Delete All Pairings 27

8.3 Firmware Upgrades 27

9 TROUBLESHOOTING 28

9.1 Fault Reset 28

9.2 Factory reset 28

5 MOBILE PHONE USAGE 16

5.1 Using Phone Functions 16

5.2 Speed Dialing 17

5.2.1 Assigning Speed Dial Presets 17

5.2.2 Using Speed Dial Presets 17

6 STEREO MUSIC 18

7 BLUETOOTH INTERCOM 19

7.1 Intercom Pairing 19

7.2 Two-way Intercom 20

7.2.1 HD Intercom 21

7.3 Multi-Way Intercom 21

7.3.1 Start a Three-Way Intercom

Conference 22

7.3.2 Starting a Four-Way Intercom

Conference 23

7.3.3 Ending Multi-Way Intercom 24

1 BEFORE STARTING

1.1 Package Contents

1.1.1 Wired Boom Microphone Type

• Headset Main Unit

(-) Button(+) Button

Multi-function Button

DC Power Charging &

Firmware Upgrade Port

Speakers and

Microphone Port

LCD Display

• Speakers and

Wired Boom

Microphone

Wired Boom Microphone

• Clamp

• Glued Surface Mounting Adapter

• Speaker Sponge (2)

• Microphone Sponge (2)

• Hook and Loop Fasteners

for Speakers (2)

• USB Power & Data Cable

(USB-C)

• Speakers and

Wired Microphone

• Clamp

• Glued Surface Mounting Adapter

• Speaker Sponge (2)

• Hook and Loop Fasteners

for Speakers (2)

• Hook and Loop Fasteners

for Wired Microphone

• USB Power & Data Cable

(USB-C)

1.1.2 Wired Microphone Type

• Headset Main Unit

(-) Button(+) Button

Multi-function Button

DC Power Charging &

Firmware Upgrade Port

Speakers and

Microphone Port

LCD Display

2.2 Using the Glued Surface

Mounting Adapter

1. Insert the main module into the glued

surface mounting adapter using the two

connecting slots on the back.

2. Remove the cover of the adhesive sticker

on the back to glue the headset on to the

helmet.

3. Attach the headset on the left side of the

helmet.

2 INSTALLING THE HEADSET ON

YOUR HELMET

Before installing the headset, you need to choose

between the clamp and the glued surface mounting

adapter. To install the headset to the helmet, follow

the steps below:

2.1 Using the Clamp

1. Insert the main module into the clamp using

the two connecting slots on the back.

2. Insert the headset into the helmet using the

clamp.

4. Insert the Speakers and Microphone plug

into the headset.

Note:

•

If your speakers are too close to your ears and

your ears are uncomfortable, you can attach a

Speaker Sponge to the front of the speaker.

•

Make sure that the microphone is located

properly close to your mouth when you wear the

helmet. Adjust the direction of the microphone

so that the n side of the microphone is facing

outward, away from your lips.

Fin

2.3 Installing the Speakers

2.3.1 Wired Boom Microphone Type

If you want to install speakers into the headset,

follow the steps below:

1. Remove the cover of the adhesive sticker of

the hook and loop fasteners for speakers.

2. Place the sticker on the helmet.

3. Place the speaker on the hook and loop

fasteners.

4. Peel off the cover of the hook and loop

fastener for wired microphone to expose the

adhesive tape. Then, attach the hook and

loop fastener on the inside of the helmet’s

chin guard.

5. Attach the wired microphone to the hook

and loop fastener for wired microphone.

2.3.2 Wired Microphone Type

If you have a full face helmet, you can use the wired

microphone.

1. Remove the cover of the adhesive sticker of

the hook and loop fasteners for speakers.

2. Place the sticker on the helmet.

3. Place the speaker on the hook and loop

fasteners.

3 GETTING STARTED

3.1 Button

Multi-function Button

(+) Button (-) Button

Tap/

Press and Hold

6. Insert the Speakers and Microphone plug

into the headset.

Indice

Manuali Accessori per motociclette popolari di altre marche

SRC

SRC B-TRK502-01-01-SL Manuale utente

3M Speedglas 9100 MP Manuale utente

hepco & becker

hepco & becker 6307520 00 01 Manuale utente

HOMCOM

HOMCOM AA0-077 Manuale utente

hepco & becker

hepco & becker 6307558 00 01 Manuale utente

Wunderkind Custom

Wunderkind Custom 106503-F15 Guida utente

Dräger

Dräger HPS 3500 Manuale utente

M-WAVE

M-WAVE SKI Manuale utente

Kuryakyn

Kuryakyn 6212 Manuale utente

hepco & becker

hepco & becker 6507504 00 01 Manuale utente

Tool it

Tool it PROMAX LCD 9.13G Manuale utente

Custom Dynamics

Custom Dynamics TruWrapz Manuale utente

Roof

Roof RO200 CARBON Manuale utente

Kabuto

Kabuto Japan IBUKI Manuale utente

PUIG

PUIG 5051 Manuale utente

rizoma

rizoma ZTH050 Manuale utente

Joubert

Joubert 10001711 Manuale utente

Sperian

Sperian Optrel p420 Manuale utente