Sena R1 Manuale utente
SMART CYCLING HELMET
MENU
R1
STEREO
MUSIC
CLICK
ANY
SECTION
TO
BEGIN
MOBILE
PHONE USAGE
PAIRING WITH
DEVICES
GENERAL
SETTINGS
TROUBLE-
SHOOTING
REMOTE
CONTROL
USING THE
FM RADIO
MAINTENANCE
AND CARE
GETTING
STARTED
INTERCOM
SETUP
ABOUT THE
HELMET
MENU
LEGEND:
=1s
HOLD
Function = Button(s) to Tap or Hold
1x
TAP Tap button the specified
number of times 10s
HOLD Press and Hold button
for the specified amount
of time
“Hello” Audible prompt
TABLE OF CONTENTS
Safety PrecautionS 7
1. aBout tHe r1 SMart cycLinG HeLMet 12
1.1 General Information 12
1.2 Product Details 14
1.3 Package Contents 14
1.4 Wearing the Helmet 15
1.4.1 How to Wear The Helmet 15
1.4.2 Helmet Fitment Check 19
2. GettinG StarteD:
BuiLt-in BLuetootH SySteM 20
2.1 Button Function 20
2.2 Powering On and Off 21
2.3 Charging 21
2.4 Checking the Battery Level 22
2.5 Volume Adjustment 24
2.6 Downloadable Sena Software 25
2.6.1 Sena Device Manager 25
2.6.2 Sena Smartphone App 25
2.7 Configuration Menu 26
3. PairinG tHe BLuetootH SySteM
witH otHer BLuetootH DeviceS 29
3.1 Mobile Phone 29
3.2 Additional Mobile Phones or MP3 Player 31
3.3 Advanced Selective Pairing:
Hands-Free or A2DP Stereo 32
3.3.1 Phone Selective Pairing — Hands-Free Profile 32
3.3.2 Media Selective Pairing — A2DP Profile 33
TABLE OF CONTENTS CONTINUED
4. MoBiLe PHone uSaGe 35
4.1 Making and Answering Calls 35
4.2 Speed Dialing 35
4.2.1 Assigning Speed Dial Presets 35
4.2.2 Using Speed Dial Presets 38
5. Stereo MuSic 40
5.1 Playing Music with Bluetooth Devices 40
5.2 Music Sharing 41
6. intercoM SetuP 42
6.1 Intercom Pairing 42
6.2 Two-Way Intercom 44
6.3 Multi-Way Intercom 45
6.3.1 Starting a Three-Way Intercom Conference 45
6.3.2 Starting a Four-Way Intercom Conference 47
6.3.3 Ending Multi-Way Intercom 47
6.4 Three-Way Conference Phone Call
with Intercom Users 47
6.5 Group Intercom 48
6.6 Universal Intercom 50
6.7 Advanced Noise Control™ (Default: Enable) 52
7. uSinG tHe fM raDio 53
7.1 FM Radio On/Off 53
7.2 Seek and Save Radio Stations 53
7.3 Scan and Save Radio Stations 55
7.4 Temporary Station Preset 56
7.5 Navigating Preset Stations 57
TABLE OF CONTENTS CONTINUED
7.6 Region Selection (Default: Worldwide) 57
7.7 Radio Data System(RDS) Alternative(AF)
Setting (Default: Enable) 58
7.8 FM Station Guide (Default: Enable) 59
8. HeaDSet confiGuration SettinGS 60
8.1 Function Priority 60
8.2 Firmware Upgrades 60
8.3 Voice Prompts 60
8.4 Deleting All Bluetooth Pairing Information 62
9. reMote controL 63
9.1 Pairing with the Remote Control 63
10. trouBLeSHootinG 65
10.1 Fault Reset 65
10.2 Factory Reset 66
11. Maintenance anD care 67
certification anD Safety aPProvaLS 68
LiMiteD ProDuct warranty DiScLaiMerS,
anD LiMitationS 71
R1 Smart Cycling Helmet | 7
MENU
Safety PrecautionS
Please ensure that the product is properly used by observing the safety precautions
below to prevent any risk of serious injury, death and/or damage to property.
Hazard alert signal words
The following safety symbols and signal words are used in this manual.
WARNING: Indicates a potential hazardous situations that, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potential hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE
:Indicates information considered important, but not hazard-related. If
not avoided, it could cause damage to your product.
Product Use
Observe the following precautions to avoid injury or damage to your product while
using the product.
WARNING
• Bicycling is associated with particular risks and dangers for the rider. These risks
and dangers can be reduced, but not eliminated completely, by wearing a helmet.
It is impossible to state precisely what the protective effect of a helmet will be in
the event of an accident. Safe riding techniques, adapted to the particular road
and weather conditions, are essential for your safety.
• Do not wear a helmet while climbing trees, in play areas, on playground
equipment, or, at any time while not riding a bicycle. Failure to follow this warning
could result in serious personal injury, death or death by strangulation.
• Your helmet will not protect against injury in all types of accidents. Even while
wearing a helmet, low speed accidents may result in serious head injury or death.
• Careless use of the product on the road is risky and may result in serious injury,
death or damage. You must heed all safety precautions in all documents that
come with this product. This will help minimize the chance these risks may occur
while riding.
CAUTION
• For maximum protection, this helmet must
be fitted and attached properly to the
rider’s head according to the User’s Guide.
• Position the helmet on your head with
the front covering your forehead. If the
helmet is tipped back and is not covering
your forehead then the helmet is not in the
proper position.
R1 Smart Cycling Helmet | 8
SAFETY PRECAUTIONS
MENU
• The protective capability of your helmet will diminish over time, dependent
upon many factors such as physical damage, exposure to pollution, harmful
chemicals and long term exposure to the sun. Sena recommends that the helmet
be replaced after five years. Although the shell is in principle capable of a longer
service life, the occurrence of material fatigue and wear to other components,
as well as the overall action of the helmet and the unknown conditions in which
the helmet has been used, make it advisable for your own safety to replace the
helmet after this period of use.
• Do not use product for extreme uses such as downhill racing at high speeds,
jumping or leaping with a fully suspended bicycle, snow sports, water sports,
motor sports, street hockey, playground activities, or other activities where face,
ear, or greater protection or coverage is desired.
• The safety helmet is designed to absorb only one impact and damage from
an impact is rarely visible from the outside. It is therefore essential to replace
the helmet after a fall, accident or other violent impact. Such helmet should be
returned to original place of purchase for inspection, or destroyed and replaced.
In the event of any impact, do not use this helmet.
• Any helmet that has been subjected to a violent impact should be replaced.
• To provide maximum protection, the helmet must fit properly on the head and its
chinstrap securely fastened under the chin.
• Always fasten the chinstrap before setting off and check that the buckle system
and straps are correctly in position.
• Never ride with the buckle unfastened or incorrectly adjusted. The chinstrap must
be correctly positioned and must not come loose when pulled.
• No helmet provides absolute protection from all conceivable impacts. This
helmet has been specially developed for bicycle riding and is unsuitable for other
purposes.
• Examine the helmet for damage at regular intervals. Small scratches will not
impair the protective function of your helmet.
• Check for proper fit and adjustment often, including each time you wear it, and
periodically during use.
• Always make sure the buckle is properly fastened and the loose end of the
chinstrap is tucked through the rubber “O” ring before you ride. Failure to follow
this instruction could result in serious personal injury.
• The helmet safety mechanism described above can also cause small cracks in the
shell when the helmet is dropped from a small height (less than 1 meter).
• Use of the product at a high volume for a long period of time may damage your
eardrums or hearing ability.
• Do not wear anything underneath your helmet, such as a cap, hood, bundled hair,
headphones, or barrettes, as the helmet may loosen or come off. Do not wear
anyone else’s helmet and don’t loan your helmet to anyone else.
• When relevant, follow all regulations regarding the use of the camera.
(1) Do not use your camera in an aircraft, unless permitted.
(2) Turn off the camera when you are near medical equipment. Your camera can
cause interference with medical devices in hospital or healthcare facilities.
R1 Smart Cycling Helmet | 9
SAFETY PRECAUTIONS
MENU
• The camera generates a low level magnetic field. Keep a safe distance between
the camera and cardiac pacemakers to avoid potential interference. Turn off the
camera immediately if your camera indicates interference with a pacemaker and
contact the pacemaker manufacturer or a physician.
• Avoid interference with other electronic devices. Your camera generates a low
level magnetic field that may interfere with unsealed or improperly shielded
electronic equipment in homes or vehicles. Consult the manufacturers of your
electronic devices to resolve any interference problems you experience.
• Never use a damaged memory card. This may result in electric shock, camera
malfunction, or fire.
NOTICE
• In some regions, it is prohibited by law to ride bicycles while wearing headsets
or earbuds. Therefore, be certain you are aware of all relevant laws in the region
where you are using the product and are sure that you comply with them.
• Do not use the product in high-temperatures or apply heat to the product as this
may cause damage, explosion, or fire.
• Do not use heat damaged helmets. Heat damaged helmets will appear to have
uneven or have bubbly surfaces.
• If the product emits an unusual smell, feels hot, or appears abnormal in any other
way while using or charging, stop using it immediately. It may cause damage,
explosion, or fire. Contact your sales location if any of these problems are
observed.
• Do not attach anything to your helmet, including mirrors or lights.
• Keep product away from pets or small children. They may damage the product.
• Do not cause impact to the product or touch it with sharp tools as this may
damage the product.
• In any place where wireless communication is prohibited, such as hospitals
or airplanes, turn off the power. In a place where wireless communication is
prohibited, electromagnetic waves may cause hazards or accidents.
• Do not use the product near hazardous explosives. When it is near any explosion
hazards, turn off the power and heed any regulations, instructions, and signs in
the area.
• Any changes or modifications to the helmet not expressly approved by the party
responsible for compliance could void the limited warranty to operate the helmet.
• High internal temperature may result in noisy photos. This is not a malfunction
and does not affect your camera’s overall performance.
• Check that the camera is operating properly in advance. Any file loss or camera
damage caused by camera malfunction or improper use is not covered under
warranty.
Battery
Your product has a built-in battery. Be careful to heed all safety information in this
guide. Failure to carefully observe the safety precautions can cause battery heat
generation, bursting, fire and serious personal injury.
R1 Smart Cycling Helmet | 10
SAFETY PRECAUTIONS
MENU
WARNING
• Do not use the product in direct sunlight for a long period of time. Doing so can
damage the product and generate heat that can cause burns.
• Do not use or store the product inside cars in hot weather. It may cause the
battery to generate heat, rupture, or ignite and cause serious injury.
• Do not continue charging the battery if it does not recharge within the specified
charging time. Doing so may cause the battery to become hot, explode, or ignite
and cause serious injury.
• Do not leave the product near open flames. Do not dispose of the product in a
fire. It may cause the battery to become hot, explode, or ignite and cause serious
injury.
• Never attempt to charge a battery with the charger which has been physically
damaged. It may cause explosion and/or accidents.
NOTICE
• Battery life may vary depending on conditions, environmental factors, functions of
the product in use, and devices used with it.
Product Storage and Management
Take the following precautions to avoid personal injury or damage to your product
while storing and maintaining the product.
CAUTION
• Do not dispose of the product with household waste. The built-in battery is not
to be disposed of in municipal waste stream and requires separate collection.
Disposal of the product should be done in accordance with the local regulations.
• Never leave the product with the lens facing the direct sunlight. Doing so may
result in a fire due to the sunlight being concentrated by the lens.
NOTICE
• Keep the product free of dust. Dust may damage mechanical and electronic parts
of the product.
• The product should be stored at room temperature. Do not expose the product
to extremely high or low temperature as this may reduce the life span of electronic
devices, damage the battery, and/or melt plastic parts of the product.
• Do not clean the product with motor fuel, thinners, cleaning solvents, toxic
chemicals, or strong detergents as this may damage the product. Make sure
the helmet does not come into contact with such substances, even for cleaning
purposes as these substances can destroy the structure of the shell.
• Do not paint the product. Paint may obstruct moving parts or interfere with the
normal operation of the product.
• Do not drop or otherwise shock the product. It may damage the product or its
internal electronic circuits.
• Do not disassemble, repair or modify the product as this may damage the product
and invalidate the product warranty.
• Do not store the product in humid environments, especially for long periods of
time. It may damage the internal electronic circuits.
Altri manuali per R1
4
Indice
Altri manuali Sena Accessori per motociclette
Sena
Sena Latitude S1 Manuale utente
Sena
Sena 50S-01 Manuale utente
Sena
Sena 10R Manuale utente
Sena
Sena Parani A10 Manuale utente
Sena
Sena R2X Manuale utente
Sena
Sena OUTRIDE Manuale utente
Sena
Sena 30K Manuale utente
Sena
Sena Latitude SR Manuale utente
Sena
Sena SP51 Manuale utente
Sena
Sena R1 Manuale utente
Sena
Sena 10C EVO Manuale utente
Sena
Sena R1 EVO Manuale utente
Sena
Sena STRYKER Manuale utente
Sena
Sena SMH10 Manuale utente
Sena
Sena R2 Manuale utente
Sena
Sena M1 Manuale utente
Sena
Sena cavalry Manuale utente
Sena
Sena 10Upad for HJC IS-MAX2 Manuale utente
Sena
Sena C1 Manuale utente
Sena
Sena R1 EVO Manuale utente
