SeNd Technology AVIOR Manuale utente
Avior Quick Start Guide SeNd Tech Ltd
SeNd Technology 2019 –www.sendtech.co.uk - Call 01488 762 763 for support
Page 1
SeNd Technology Ltd
Quick Start Guide
AVIOR WiFi, 2G & 4G IoT Telemetry
Quick Check List (local configuration)
Avior Unit!
Antenna is connected
Active SIM card is inserted in base
External power connected
USB to serial programming cable connected
Download AviorSuite software at https://www.sendtech.info/avior
Avior Quick Start Guide SeNd Tech Ltd
SeNd Technology 2019 –www.sendtech.co.uk - Call 01488 762 763 for support
Page 2
Local Configuration:
Download the latest AviorSuite software from https://www.sendtech.info/avior
Unzip the folder and click on the AviorSuite.exe application.
If you have a 2 or 4G unit insert a SIM card into the base of the Avior and connect an antenna, power and the
USB programming cable to your PC.
The AviorSuite software should recognise the attached Avior and
assigned COM port. Click on the USB icon to connect to the Avior unit
Enter the password (default 0000).
Note: When you have set up either Wifi or the mobile APN details you will be able to configure and monitor your
Avior remotely.
Initial Configuration (Housekeeping) –CONFIGURATION
The following stages set up the device name and network connection details:
1. Device –Here you can give the device a name to fit the installation of application eg “Pump Station”
Note: When you edit and make changes remember to click on the tick on the second row to save the change in
the connected device.
Click the
TICK to save
the change!
Avior Quick Start Guide SeNd Tech Ltd
SeNd Technology 2019 –www.sendtech.co.uk - Call 01488 762 763 for support
Page 3
2. WiFi –Enter the local WiFI network name (SSID) and password
3. PLMN –This is the mobile network for the SIM you are using –Make ACTIVE then enter the mobile
number of the SIM card in international format and the APN, username and password required for the
network to make a data connection. If you are unsure of these just Google the network and APN.
Avior Quick Start Guide SeNd Tech Ltd
SeNd Technology 2019 –www.sendtech.co.uk - Call 01488 762 763 for support
Page 4
Initial Programming (Sending Alert Messages) –RULES
RULES –Rules consist of a TRIGGER (eg Digital Input 1) and can be combined with up to 5 CONDITIONS (eg Input
1 value = 1 –ie. it has closed) and a subsequent ACTION (eg send a SMS message and an email –up to 5
ACTIONS can be triggered per RULE.
In this example when the triggers INPUT 1 is closed AND it’s a WEEKDAY then action the commands to turn on
OUTPUT1 AND send an SMS AND an EMAIL to confirm the pump is running (all in the one RULE).
There are many options here. Please look at the text at the bottom of the configuration page for context based
usage and also click on the HELP icon (top right) for full documentation.
We also have video guides for set up on YouTube which can be found on the Avior page of our website.
Avior Quick Start Guide SeNd Tech Ltd
SeNd Technology 2019 –www.sendtech.co.uk - Call 01488 762 763 for support
Page 5
Initial Programming –USERS
USERS are people that are authorised to send commands to the remote Avior unit to change values or process
ACTIONS.
Example:
A USER would like to turn on output relay 1 when they send a SMS word “start” to the Avior.
Step 1: Set the user name and their authorised mobile number
Users can be identified by their phone number or email and we can also set other Avior units as users to allow
communication between units either over their own WiFi LAN or remotely over the mobile network.
Avior Quick Start Guide SeNd Tech Ltd
SeNd Technology 2019 –www.sendtech.co.uk - Call 01488 762 763 for support
Page 6
Step 2: Set a RULE that when a TRIGGER (incoming SMS) contains the CONDITION (the word “start”) the ACTION
turn relay output 1 ON is performed. In the example below a SMS is also sent confirming the action.
RULES –Rules consist of a TRIGGER (eg SMS from USER) and can be combined with up to 5 CONDITIONS (eg Last
SMS received contains the word “start”) and a subsequent ACTION (eg Turn Output 1 ON and send a SMS to the
last sender $N23) –up to 5 ACTIONS can be triggered per RULE.
This QuickStart is just a very basic overview of what the Avior can do to get you up and running.
Monitoring and configuration can also be done via the Avior webserver or using the optional embedded
webserver via WiFi or the mobile network. Please contact SeNdTech for help and advice with configuration and
your application.
Indice
Altri manuali SeNd Technology Attrezzature industriali
