3SCT-1060 Ver. 1.2
U1
XT2
T1
U10 U9 U8 U7
U6
Q9
U4
SW1
LED2
U3
CN7 CN6 CN5 CN4 CN2
CN1
U2
LED1 LED3
SW3
21 76543 8 OFF
ON
3412 OFF
ON
RS-485 TRANSMITTER
BIPHASERECEIVER
SW1-1 to SW1-5
ADRGROUP#SELECTION
12345GROUP#
OFF OFF OFF OFF OFF GROUP 1
ON OFF OFF OFF OFF GROUP 2
OFF ON OFF OFF OFF GROUP 3
ON ON OFF OFF OFF GROUP 4
OFF OFF ON OFF OFF GROUP 5
ON OFF ON OFF OFF GROUP 6
OFF ON ON OFF OFF GROUP 7
ON ON ON OFF OFF GROUP 8
OFF OFF OFF ON OFF GROUP 9
ON OFF OFF ON OFF GROUP 10
OFF ON OFF ON OFF GROUP 11
ON ON OFF ON OFF GROUP 12
OFF OFF ON ON OFF GROUP 13
ON OFF ON ON OFF GROUP 14
OFF ON ON ON OFF GROUP 15
ON ON ON ON OFF GROUP 16
OFF OFF OFF OFF ON GROUP 17
ON OFF OFF OFF ON GROUP 18
OFF ON OFF OFF ON GROUP 19
ON ON OFF OFF ON GROUP 20
OFF OFF ON OFF ON GROUP 21
ON OFF ON OFF ON GROUP 22
OFF ON ON OFF ON GROUP 23
ON ON ON OFF ON GROUP 24
OFF OFF OFF ON ON GROUP 25
ON OFF OFF ON ON GROUP 26
OFF ON OFF ON ON GROUP 27
ON ON OFF ON ON GROUP 28
OFF OFF ON ON ON GROUP 29
ON OFF ON ON ON GROUP 30
OFF ON ON ON ON GROUP 31
ON ON ON ON ON GROUP 32
SW3-4
OUTPUT CODE TYPE
ON: Variable speed
OFF: Two speed
SW3-1, SW3-2
OUTPUT BAUD RATE
1 2 BAUD
OFF OFF 2400
ON OFF 4800
OFF ON 9600
ON ON 19200
SETTING THE SWITCHES
Toset the configuration switches, remove the back panel,which is securedby two screws.Then
slidethe cover back to expose the switches.The switches canbe changed while thecode trans-
lator is powered up and the new settings will take effect immediately.
SW1-8
ADR GROUP SIZE
ON: GROUPS OF 96
OFF: GROUPS OF 32
(Default)
(Default)
(Default)
